Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

radius-server timeout

To reply to a request, configure the amount of time the RADIUS client (the switch) waits for a RADIUS host server .

Syntax

radius-server timeout seconds

To return to the default value, use the no radius-server timeout command.

Parameters

seconds

Enter the number of seconds between an unsuccessful attempt and the radius-server timeout times out. The range is from zero (0) to 1000 seconds. The default is 5 seconds.

Defaults

5 seconds

Command Modes

CONFIGURATION

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
9.3(0.0)	Supported on the M I/O Aggregator.

Related Commands

radius-server host — configures a RADIUS host.