Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

neighbor add-path

This command allows the specified neighbor/peer group to send/receive multiple path advertisements.

Syntax

neighbor [ ip-address | peer-group-name] add-path [send | receive | both] count

Parameters

ip-address	(OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.
peer-group-name	(OPTIONAL) Enter the name of the peer group.
send	Enter the keyword `send` to indicate that the system sends multiple paths to peers.
receive	Enter the keyword `receive` to indicate that the system accepts multiple paths from peers.
both	Enter the keyword `both` to indicate that the system sends and accepts multiple paths from peers.
count	Enter the number paths supported. The range is from 2 to 64.

Defaults

none

Command Modes

CONFIGURATION-ROUTER-BGP-ADDRESS FAMILY

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

bgp add-path — allows the advertisement of multiple paths for the same address prefix without the new paths implicitly replacing any previous ones.