Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip ospf database opaque-area

Display the opaque-area (type 10) LSA information.

Syntax

show ip ospf process-id database opaque-area [ link-state-id] [adv-router ip-address]

Parameters

process-id	Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process.
link-state-id	(OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the LSA type, and it can be one of the following: the network’s IP address for Type 3 LSAs or Type 5 LSAs the router’s OSPF router ID for Type 1 LSAs or Type 4 LSAs the default destination (0.0.0.0) for Type 5 LSAs
adv-router ip-address	(OPTIONAL) Enter the keywords `adv-router` and the ip-address to display only the LSA information about that router.

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The following describes the show ip ospf process-id database opaque-area command shown in the following example.

Item	Description
LS Age	Displays the LSA’s age.
Options	Displays the optional capabilities available on router. The following options can be found in this item: TOS-capability or No TOS-capability is displayed depending on whether the router can support Type of Service. DC or No DC is displayed depending on whether the originating router can support OSPF over demand circuits. E or No E is displayed on whether the originating router can accept AS External LSAs.
LS Type	Displays the LSA’s type.
Link State ID	Displays the Link State ID.
Advertising Router	Identifies the advertising router’s ID.
Checksum	Displays the Fletcher checksum of the LSA’s complete contents.
Length	Displays the length in bytes of the LSA.
Opaque Type	Displays the Opaque type field (the first 8 bits of the Link State ID).
Opaque ID	Displays the Opaque type-specific ID (the remaining 24 bits of the Link State ID).

Example

Dell>show ip ospf 1 database opaque-area
                                             
                                             OSPF Router with ID (3.3.3.3) (Process ID 1)
                                             Type-10 Opaque Link Area (Area 0)
                                             
                                             LS age: 1133
                                             Options: (No TOS-capability, No DC, E)
                                             LS type: Type-10 Opaque Link Area
                                             Link State ID: 1.0.0.1
                                             Advertising Router: 10.16.1.160
                                             LS Seq Number: 0x80000416
                                             Checksum: 0x376
                                             Length: 28
                                             Opaque Type: 1
                                             Opaque ID: 1
                                             Unable to display opaque data
                                             
                                             LS age: 833
                                             Options: (No TOS-capability, No DC, E)
                                             LS type: Type-10 Opaque Link Area
                                             Link State ID: 1.0.0.2
                                             Advertising Router: 10.16.1.160
                                             LS Seq Number: 0x80000002
                                             Checksum: 0x19c2
                                             --More--

Related Commands

show ip ospf database — displays OSPF database information.