Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

maximum-paths

Enable the software to forward packets over multiple paths.

Syntax

maximum-paths number

To disable packet forwarding over multiple paths, use the no maximum-paths command.

Parameters

number

Specify the number of paths. The range for OSPFv2 is from 1 to 16. The default for OSPFv2 is 4 paths. The range for OSPFv3 is from 1 to 64. The default for OSPFv3 is 8 paths.

Defaults

4

Command Modes

ROUTER OSPF for OSPFv2

ROUTER OSPFv3 for OSPFv3

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Added support for OSPFv3.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.