Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

ip host

Assign a name and IP address to be used by the host-to-IP address mapping table.

Syntax

ip host name ip-address

To remove an IP host, use the no ip host name [ ip-address] command.

Parameters

name	Enter a text string to associate with one IP address.
ip-address	Enter an IP address, in dotted decimal format, to be mapped to the name.

Defaults

Not configured.

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.