Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

logging trap

Specify which messages are logged to the Syslog server based the message severity.

Syntax

logging trap [ level]

To return to the default values, use the default logging trap command.

To disable logging, use the no logging trap command.

Parameters

level

Indicate a value from 0 to 7 or enter one of the following parameters: emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging. The default is 6 or informational.

Defaults

6 or informational

Command Modes

CONFIGURATION

Supported Modes

Full–Switch Mode

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

logging — enables the logging to another device.

logging on — enables logging.