Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

rate police

Police the incoming traffic rate on the selected interface.

Syntax

rate police [kbps] committed-rate [ burst-KB] [peak [kbps] peak-rate [ burst-KB]]

Parameters

kbps	Enter the keyword `kbps` to specify the rate limit in Kilobits per second (Kbps). Make the following value a multiple of 64. The range is from 0 to 40000000. The default granularity is Megabits per second (Mbps).
committed-rate	Enter the bandwidth in Mbps. The range is from 0 to 10000.
burst-KB	(OPTIONAL) Enter the burst size in KB. The range is from 16 to 200000. The default is 100.
peak peak-rate	(OPTIONAL) Enter the keyword `peak` then a number to specify the peak rate in Mbps. The range is from 0 to 10000. The default is the same as designated for `committed-rate`.

Defaults

Burst size is 100 KB. peak-rate is the same as committed-rate. Granularity for committed-rate and peak-rate is Mbps unless you use the kbps option.

Command Modes

INTERFACE

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the M I/O Aggregator.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

rate police — specifies traffic policing on the selected interface.

qos-policy-input — creates a QoS output policy.