Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show isis traffic

This command allows you to display IS-IS traffic interface information.

Syntax show isis traffic [ interface]
Parameters
interface (OPTIONAL) Identifies the interface type slot/port as one of the following:
  • For a Port Channel interface, enter the keywords port-channel then a number. The range is from 1 to 128.
  • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.
  • For a VLAN, enter the keyword vlan then a number from 1 to 4094.
Command Modes
  • EXEC
  • EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The following describes the show isis traffic command shown in the following example.
Item Description
Level-1/Level-2 Hellos (sent/rcvd) Displays the number of Hello packets sent and received.
PTP Hellos (sent/rcvd) Displays the number of point-to-point Hellos sent and received.
Level-1/Level-2 LSPs sourced (new/refresh) Displays the number of new and refreshed LSPs.
Level-1/Level-2 LSPs flooded (sent/rcvd) Displays the number of flooded LSPs sent and received.
Level-1/Level-2 LSPs CSNPs (sent/ rcvd) Displays the number of CSNP LSPs sent and received.
Level-1/Level-2 LSPs PSNPs (sent/ rcvd) Displays the number of PSNP LPSs sent and received.
Level-1/Level-2 DR Elections Displays the number of times designated router elections ran.
Level-1/Level-2 SPF Calculations Displays the number of shortest path first calculations.
LSP checksum errors received Displays the number of checksum errors LSPs received.
LSP authentication failures Displays the number of LSP authentication failures.
Example
Dell#sho is traffic
                                             IS-IS: Level-1 Hellos (sent/rcvd) : 0/721
                                             IS-IS: Level-2 Hellos (sent/rcvd) : 900/943
                                             IS-IS: PTP Hellos (sent/rcvd) : 0/0
                                             IS-IS: Level-1 LSPs sourced (new/refresh) : 0/0
                                             IS-IS: Level-2 LSPs sourced (new/refresh) : 1/3
                                             IS-IS: Level-1 LSPs flooded (sent/rcvd) : 0/0
                                             IS-IS: Level-2 LSPs flooded (sent/rcvd) : 5934/5217
                                             IS-IS: Level-1 LSPs CSNPs (sent/rcvd) : 0/0
                                             IS-IS: Level-2 LSPs CSNPs (sent/rcvd) : 472/238
                                             IS-IS: Level-1 LSPs PSNPs (sent/rcvd) : 0/0
                                             IS-IS: Level-2 LSPs PSNPs (sent/rcvd) : 10/337
                                             IS-IS: Level-1 DR Elections : 4
                                             IS-IS: Level-2 DR Elections : 4
                                             IS-IS: Level-1 SPF Calculations : 0
                                             IS-IS: Level-2 SPF Calculations : 389
                                             IS-IS: LSP checksum errors received : 0
                                             IS-IS: LSP authentication failures : 0
                                             Dell#
                                          

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"