Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Port Monitoring

The Aggregator supports multiple source-destination statements in a monitor session, but there may only be one destination port in a monitoring session.

There may only be one destination port in a monitoring session ( % Error: Only one MG port is allowed in a session. ).

The number of source ports the Dell Networking OS allows within a port-pipe is equal to the number of physical ports in the port-pipe (n). Multiple source ports may have up to four different destination ports ( Exceeding max MG ports for this MD port pipe.).

In the following examples, ports 0/1, 0/2, 0/3, and 0/4 all belong to the same port-pipe. These ports mirror traffic to four different destinations (0/9, 0/10, 0/11, and 0/12).

Example of Number of Monitoring Ports 

Dell#show mon session
                                 SessionID  Source     Destination  Direction Mode       Type
                                 ---------  ------     -----------  --------- ----      ----
                                 0        TenGig 0/1   TenGig 0/9     rx     interface  Port-based
                                 10       TenGig 0/2   TenGig 0/10    rx     interface  Port-based
                                 20       TenGig 0/3   TenGig 0/11    rx     interface  Port-based
                                 30       TenGig 0/4   TenGig 0/12    rx     interface  Port-based
                                 Dell(conf)#

A source port may only be monitored by one destination port, but a destination port may monitor more than one source port.

Dell Networking OS Behavior: All monitored frames are tagged if the configured monitoring direction is transmit (TX), regardless of whether the monitored port (MD) is a Layer 2 or Layer 3 port.
  • If the MD port is a Layer 2 port, the frames are tagged with the VLAN ID of the VLAN to which the MD belongs.
  • If the MD port is a Layer 3 port, the frames are tagged with VLAN ID 4095.
  • If the MD port is in a Layer 3 VLAN, the frames are tagged with the respective Layer 3 VLAN ID.
For example, in the configuration source tengig 0/1 destination tengig 0/9 direction tx, if the source port 0/1 is an untagged member of any VLAN, all monitored frames that the destination port 0/9 receives are tagged with the VLAN ID of the source port.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"