Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Save the Running-Configuration

The running-configuration contains the current system configuration. Dell Networking recommends coping your running-configuration to the startup-configuration.

The system uses the startup-configuration during boot-up to configure the system. The startup-configuration is stored in the internal flash on the IOM by default, but you can save it to a USB flash device or a remote server.
The commands in this section follow the same format as those commands in the Copy Files to and from the System section but use the filenames startup-config and running-config. These commands assume that current directory is the internal flash, which is the system default.
  • Save the running-config to the startup-configuration on the internal flash. EXEC Privilege mode copy running-config startup-config
  • Save the running-configuration on the IOM. EXEC Privilege mode copy running-config usbflash: //filename
  • Save the running-configuration to an FTP server. EXEC Privilege mode copy running-config ftp: // username:password@{hostip | hostname}/filepath/ filename
  • Save the running-configuration to a TFTP server. EXEC Privilege mode copy running-config tftp: //{hostip | hostname}/ filepath/filename
  • Save the running-configuration to an SCP server. EXEC Privilege mode copy running-config scp: //{hostip | hostname}/ filepath/filename
    • NOTE: When copying to a server, you can only use a host name if you have configured a DNS server.
  • Save the running-configuration to the startup-configuration on the internal flash of the primary RPM. Then copy the new startup-config file to the external flash of the primary RPM. EXEC Privilege mode copy running-config startup-config duplicate

Dell Networking OS Behavior: If you create a startup-configuration on an RPM and then move the RPM to another chassis, the startup-configuration is stored as a backup file (with the extension .bak), and a new, empty startup-configuration file is created. To restore your original startup-configuration in this situation, overwrite the new startup-configuration with the original one using the copy startup-config.bak startup-config command.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"