How to Collect DDMC (Data Domain Management Center) Support Bundle on version 2.0.x and above
Summary: Different process in the GUI for collecting Support Bundles on DDMC for DDMC 2.0.1.0 and above
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
The information below shows the steps needed to collect a support bundle on Data Domain Management Center (DDMC) versions 2.0 and above.
Fig. 2:
Fig. 3:
Fig. 4:
Fig. 5:
- Log in to DDMC GUI using web browser
- Click on the settings gear icon in the upper right hand side of the screen (Fig. 1)
- For DDMC versions 2.0-7.6:
- Once the setting screen is seen, go to the left hand menu, looks under the System heading and click on "Support" (Fig. 2)
- Click on the "Support Bundles" tab on the top of the screen and click "Generate Support Bundle" (Fig. 3)
- For DDMC versions 7.7 and higher:
- Click on "Support Bundles" in the dropdown menu that appears after clicking on the gear icon (Fig. 4)
- Click on "Generate DDMC Support Bundle" in the pane that appears (Fig. 5)
- Once the support bundle is generated, please download it to your PC and upload to the required Service Request on the Dell EMC support portal or to a temporary FTP site as provided by a support technician
Fig. 2:
Fig. 3:
Fig. 4:
Fig. 5:
Affected Products
Data DomainProducts
Data Domain, PowerProtect Data Domain Management CenterArticle Properties
Article Number: 000010273
Article Type: How To
Last Modified: 29 Apr 2024
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.