PowerProtect Data Manager (PPDM): errore di montaggio su Windows Server con la versione 19.12

Summary: Tutti i tentativi di eseguire FLR su questo server Windows 2016 hanno esito negativo. Il processo di montaggio viene avviato e alla fine si guasta dopo circa 15 minuti a causa della porta in uso sul sistema. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

Errore segnalato in "RIPRISTINA0002" Unable to restore FILE_SYSTEM asset C:\ a causa di un problema dell'agente.

Interfaccia utente dei processi di protezione
 
 

Cause

La porta 7001 è occupata e in uso sull'host. Questa porta è richiesta da RestServer per FLR.
output netstat
 

Resolution

Soluzione alternativa: eseguire FLR su un altro host in cui la porta 7001 non è in uso, disabilitare o modificare il servizio in esecuzione sulla porta 7001.

Nel backlog per le nuove funzionalità di PPDM è necessario configurare questa porta configurabile dal cliente.

Affected Products

Data Protection, Data Backup & Protection Software, PowerProtect Software
Article Properties
Article Number: 000209800
Article Type: Solution
Last Modified: 23 Oct 2024
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.