Dell Unity: Uploading the Unity Upgrade File Fails With Error Code: 0x7d13001
摘要: When uploading the Unity OE Upgrade file, it fails with error code: 0x7d13001.
本文适用于
本文不适用于
本文并非针对某种特定的产品。
本文并非包含所有产品版本。
症状
After Steps 5 and 6, when reaching 99% progress, the following error message displays in Unisphere UI:
"The system encountered an unexpected error. Search for the error code on the support website or product forums, or contact your service provider, if available. (Error Code:0x7d13001)"
原因
An issue occurs when uploading the Unity OE file. There are generally two (2) reasons:
- The file is corrupt.
- Likely the file did not copy entirely from Support Pages or other locations.
- There is an intermittent connectivity issue between the Unisphere UI and the location where the OE file was copied from.
解决方案
- Restart the Unity Management Services and attempt the upgrade again from Step 1.
- Verify that the OE File is not corrupt.
- Download the image again.
- Verify that the size of the file matches both locations.
- Review the md5sum of the upgrade filev
- Review the size of the file.
For additional help, contact Dell Technical Support and reference Article 000541355.
受影响的产品
Dell EMC Unity, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Hybrid文章属性
文章编号: 000058591
文章类型: Solution
上次修改时间: 28 10月 2025
版本: 3
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。