- Notes, cautions, and warnings
- Introduction
- Using Lifecycle Controller
- Operating system deployment
- Monitor
- Hardware inventory view and export
- About view and export current inventory
- About view and export factory-shipped inventory
- Viewing hardware inventory — current or factory shipped
- Exporting hardware inventory — current or factory shipped
- Viewing or exporting hardware inventory after part replacement
- Viewing or exporting current inventory after resetting Lifecycle Controller
- Lifecycle Controller log
- Firmware update
- Configure
- System control panel access options
- Configuring iDRAC
- Configuring system time and date
- Configuring vFlash SD card
- Configuring RAID
- Configuring RAID using software RAID
- Creating a secure virtual disk on a RAID controller
- Key encryption
- Local key encryption mode
- Breaking mirrored drives
- System setup — Advanced Hardware Configuration
- Collect system inventory on restart
- Configuring local FTP server
- Configuring a local USB drive
- Configuring NFS and CIFS servers
- Conditions while configuring HTTP server
- Maintain
- Platform restore
- Backup server profile
- Export server profile
- Import server profile
- Import server license
- Part replacement configuration
- Repurpose or retire system
- Hardware diagnostics
- SupportAssist Collection
- Easy-to-use system component names
- Using the system setup and boot manager
- Troubleshooting and frequently asked questions
Dell Lifecycle Controller GUI v2.30.30.30 User's Guide
Accessing updates on a local FTP server
You must know the IP address of the local FTP server to specify the online repository when using the OS Deployment and Firmware Update features.
If you are accessing the local FTP server through a proxy server,
you require the following information about the proxy server:
- The host name or IP address of the proxy server
- The port number of the proxy server
- The user name to access the proxy server
- The password to access the proxy server
- The type of proxy server
- To download drivers using a proxy server to access an FTP server,
you must specify:
- Address — The IP address of the local FTP server or ftp.dell.com
- User Name — The user name to access the FTP location.
- Password — The password to access this FTP location.
- Proxy Server — The server host name or the IP address of the proxy server.
- Proxy Port — The port number of the proxy server.
- Proxy Type — The type of proxy server. HTTP and SOCKS 4 proxy server types are supported by Lifecycle Controller.
- Proxy User Name — The user name required to access the proxy server.
- Proxy Password — The password required to access the proxy server.
The following characters are supported for
User Name and
Password:
- Digits (0–9)
- Alphabets (a-z, A-Z)
- Hyphen (-)
Related concepts
Zadejte hodnocení (1 až 5 hvězdiček).
Zadejte hodnocení (1 až 5 hvězdiček).
Zadejte hodnocení (1 až 5 hvězdiček).
Vyberte, zda vám článek pomohl či nikoli.
Komentáře nesmí obsahovat tyto speciální znaky: <>() \