Dell Lifecycle Controller GUI v2.30.30.30 User's Guide

Selecting and applying updates

To select and apply the updates, from the Available System Updates table, select the check box corresponding to the component that has the firmware you want to update. After you select the catalog ID details, of the firmware selected are displayed in the following format:
Release Date: YYYY-MM-DD

Source: USB Drive or CD or DVD (< device type >): \< firmware file name in .exe format >.

By default, Lifecycle Controller selects the components for which the current updates are available.
Click Apply. The system may restart after the update process is complete. When applying more than one update, the system may restart between the updates and launch back to Lifecycle Controller, and continue with the other selected updates.

NOTE: The system does not restart after updating the operating system driver pack and hardware diagnostics.

NOTE: While using Lifecycle Controller to update the power supply unit (PSU) firmware, the system turns off after the first task. It takes a couple of minutes to update the PSU firmware, and then automatically turns on the server.

Related concepts

Selecting the type of update and update source