Μετάβαση στο κύριο περιεχόμενο
Έξοδος

Καλώς ορίσατε στην Dell

Ο λογαριασμός μου
  • Υποβάλετε παραγγελίες γρήγορα και εύκολα
  • Δείτε τις παραγγελίες και παρακολουθήστε την κατάσταση αποστολής
  • Δημιουργήστε μια λίστα με τα προϊόντα σας για να έχετε πρόσβαση σε αυτή
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Είσοδος Δημιουργήστε έναν λογαριασμό Είσοδος στο Premier Είσοδος στο Πρόγραμμα συνεργατών
Επικοινωνία

Dell Wyse ThinOS Release 8.3.1 Administrator’s Guide

PDF

Configuring the General Display Settings

To configure the general display settings:
  1. From the desktop menu, click System Setup, and then click Display. The Display dialog box is displayed.
  2. Click the General tab, and use the following guidelines:
    1. Select best display setting on DDC monitor—If the monitor is VESA DDC2B (Display Data Channel) compatible, selection of this option allows the thin client to automatically select the best resolution and refresh rate.

      If your monitor is not DDC compatible, then Monitor does not support Plug and Play message is displayed. Click OK to acknowledge the message and remove it from the screen.

    2. DDC table— If the monitor is VESA DDC2B (Display Data Channel) compatible, selection of this option allows you to select the resolution and refresh rate you want from the list.
    3. User defined display setting— Select this option and select the resolution and refresh rate supported by your monitor. All combinations are allowed. Resolutions include:

      640 x 480 (not on T10D)

      800 x 600 (not on T10D)

      1024 x 768

      1152 x 864

      1280 x 720

      1280 x 768 (not on T10)

      1280 x 1024

      1360 x 768 (not on T class)

      1366 x 768

      1368 x 768 (not on T class)

      1400 x 1050

      1440 x 900

      1600 x 900

      1600 x 1200

      1680 x 1050

      1920 x 1080

      1920 x 1200

      1920 x 1440 (R class only)

      2560 x 1080 (Single monitor only; R class and D/Z class only)

      2560 x 1440 (Single monitor only; R class and D/Z class only)

      2560 x 1600 (Single monitor only; R class and D/Z class only)

      3840 x 2160 (Single monitor only; D/Z class only)

      Refresh rate list selections include:

      60 Hz (default)

      75 Hz

      85 Hz

    4. Rotation —Select a rotation option; either None, Left turn 90 degrees, or Right turn 90 degrees .
    5. Desktop Color— Only 32 bit is permitted from ThinOS 8.2. This value is selected by default.
    6. Usage Help — This section contains brief instructions for using the Display dialog box and running the test. No operator entry can be made in this box.

      Make note of the instructions in the area, regarding v-key reset usage in case of display failure.

  3. Click OK to save the settings.

Dual 4K (3840x2160) support

The following are the list of tested monitor resolutions supported for Wyse 5060 thin client:

640 x 480

800 x 600

1024 x 768

1152 x 864

1280 x 720

1280 x 768

1280 x 1024

1360 x 768

1366 x 768

1368 x 768

1400 x 1050

1440 x 900

1600 x 900

1600 x 1200

1680 x 1050

1920 x 1080

1920 x 1200

2560 x 1080

2560 x 1440

2560 x 1600

3440 x 1440

3840 x 2160

Dual 3840 x 2160 is supported with Dual Display ports for 30 Hz display refresh rate.

The following are the tested Dell monitors supporting dual 3840 x 2160 resolution:

Dell P2815Q (3840 x 2160)

Dell UP3216Q (3840 x 2160)

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\