Dell Wyse ThinOS Release 8.3.1 Administrator’s Guide

ICA SuperCodec

ICA SuperCodec is a H.264 decoder integrated on ThinOS ICA client side. Server encodes the session image into H.264 stream and sends it to client side. Client decodes the H.264 stream by SuperCodec and show the image on screen. It should improve user experience especially for HDX3DPro desktops.

Supported Environment

XenDesktop/XenApp 7.5 or later versions

Supported Platforms

All the platforms support ICA SuperCodec except on C10LE and R10L.

Verifying the working status of the ICA connections

For Wyse 3010 Thin Client Series (T10) and Wyse 3020 Thin Client Series (T10D)
ICA SuperCodec is enabled by default when ThinOS resolution is lesser than or equal to 1920 x 1080.
1. When the feature is working, the following results are displayed:
  ThinOS event log ICA: SuperCodec enabled
  Click HDX Monitor > Graphics > Thinwire advanced > Encoder: DeepCompressionV2Encoder for NON-HDX3DPro desktops or DeepCompressionEncoder for HDX3DPro desktops.
2. When the feature is disabled, you can view the following results:
  ThinOS event log: System resolution exceeds hardware limitation (1920 x 1080), disable SuperCodec
  Click HDX Monitor > Graphics > Thinwire Advanced > Encoder > CompatibilityEncoder; CompatibilityEncoder.
For other platforms except C10LE, R10L Wyse 3010 Thin Client with ThinOS (T10) and Wyse 3020 thin client with ThinOS (T10D)
- ICA SuperCodec is always enabled without any limitation.
- ThinOS event log displays ICA: SuperCodec enabled.

NOTE: For ICA connections, there is no INI parameter.

Καλώς ορίσατε

Καλώς ορίσατε στην Dell

Dell Wyse ThinOS Release 8.3.1 Administrator’s Guide

ICA SuperCodec

Rate this content