Dell Wyse ThinOS Release 8.3.1 Administrator’s Guide

Using INI Parameters for Configuring LPD Services

Configuring LPD printing using ThinOS INI parameters is simple and an easy way to configure a ThinOS thin client to be a basic network print server, to share local printers with other thin clients.

Your INI parameters will look something like the following:

Printer=LPT1 \
                                 Name="HP LaserJet 4000" \
                                 PrinterID="HP LaserJet 4000 Series PCL" \
                                 Enabled=yes \
                                 EnableLPD=yes

NOTE: The PrinterID is the exact text of the Windows printer driver name, so if a printer driver is named HP LaserJet 4000 Series PCL in Windows, then it must be exactly the same in the PrinterID field in the INI parameters including capitalizations and spaces.

Καλώς ορίσατε

Καλώς ορίσατε στην Dell

Dell Wyse ThinOS Release 8.3.1 Administrator’s Guide

Using INI Parameters for Configuring LPD Services

Rate this content