Μετάβαση στο κύριο περιεχόμενο
Έξοδος

Καλώς ορίσατε στην Dell

Ο λογαριασμός μου
  • Υποβάλετε παραγγελίες γρήγορα και εύκολα
  • Δείτε τις παραγγελίες και παρακολουθήστε την κατάσταση αποστολής
  • Δημιουργήστε μια λίστα με τα προϊόντα σας για να έχετε πρόσβαση σε αυτή
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Είσοδος Δημιουργήστε έναν λογαριασμό Είσοδος στο Premier Είσοδος στο Πρόγραμμα συνεργατών
Επικοινωνία

Dell Wyse ThinOS Release 8.3.1 Administrator’s Guide

PDF

Configuring the Proxy Settings

The network Proxy tab is added to support Cloud Client Manager (CCM) and HDX Flash Redirection.

Supported Protocols

  • For HDX FR, HTTP and HTTPS protocols are supported.

    • If both are configured, the HDX FR works with HTTPS proxy.
    • User credential pass through is possible with $UN/$PW.
  • For CCM, HTTP, HTTPS and Socks5 (recommended) protocols are supported.
  1. From the desktop menu, click System Setup, and then click Network Setup. The Network Setup dialog box is displayed.
  2. Click the Proxy tab, and use the following guidelines:

    1. Enter the HTTP proxy port number or HTTPS proxy port number, Username and Password in the respective fields. However, Credential pass through ($UN/$PW) is not recommended because it starts before user sign on.

      CCM uses both HTTP/HTTPS and MQTT protocols to communicate with CCM/MQTT server. However, the HTTP proxy cannot redirect TCP packages to MQTT server which requires a Socks5 proxy server. If there is only HTTP server available, then the real-time command that requires MQTT will not work.

      HTTP/HTTPS proxy default port is 808, and SOCK5 proxy default port is 1080.

    2. Select the Use the first proxy server for all protocols check box to allow all the protocols to use the same server in HTTP Proxy fields. Both HTTP and HTTPS proxy use the same host and port, and Socks5 proxy agent uses HTTP host with default Socks 5 port (1080).

    3. If SOCKS5 proxy is configured, then CCM proxy uses the SOCKS5 only. If SOCKS5 is not configured, then CCM proxy searches for alternative protocols, for example, HTTP in the configuration.

    4. Specify the supported applications as CCM and FR in the Apply proxy server on field.
  3. Click OK to save the settings.
User Scenarios
  1. Configure correct proxy server host and port.

  2. Configure the user credentials according to the proxy server settings.

  3. On system restart, the client checks in to the CCM server through Socks5 proxy server.

  4. MQTT connection is established through Socks5 proxy server.

  5. Real-time commands work fine through Socks5 proxy server.

  6. Connect to the Citrix desktop, configure proxy in internet options of the browser, and then playback HDX FR through the HTTP/HTTPS proxy authentication.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\