Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

bgp dampening

Enable MBGP route dampening.

Syntax

bgp dampening [ half-life time] [route-map map-name]

To disable route dampening, use the no bgp dampening [ half-life time] [route-map map-name] command.

Parameters

half-life time	(OPTIONAL) Enter the number of minutes after which the Penalty is decreased. After the router assigns a Penalty of 1024 to a route, the Penalty is decreased by half, after the half-life period expires. The range is from 1 to 45. The default is 15 minutes.
route-map map-name	(OPTIONAL) Enter the keywords `route-map` then the name of a configured route map. Only match commands in the configured route map are supported.

Defaults

Disabled.

Command Modes

ROUTER BGPV6-ADDRESS FAMILY

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.