Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show dcb

Displays the data center bridging status, the number of PFC-enabled ports, and the number of PFC-enabled queues.

Syntax

show dcb [stack-unit unit-number]

Parameters

unit number

Enter the DCB unit number. The range is from 0 to 5.

Command Modes

EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
9.2(0.0)	Introduced on the M I/O Aggregator.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

Specify a stack-unit number on the Master switch in a stack.

Example

Dell#show dcb
                                             stack-unit 0 port-set 0
                                             DCB Status                               :  Enabled
                                             PFC Queue Count                          :        2
                                             Total Buffer[lossy + lossless] (in KB)   :     3822
                                             PFC Total Buffer (in KB)                 :     1912
                                             PFC Shared Buffer (in KB)                :      832
                                             PFC Available Buffer (in KB)             :     1080