Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

clear ipv6 neighbors

Delete all entries in the IPv6 neighbor discovery cache or neighbors of a specific interface. Static entries are not removed using this command.

Syntax

clear ipv6 neighbors [ ipv6-address] [ interface]

Parameters

ipv6-address

Enter the IPv6 address of the neighbor in the x:x:x:x::x format to remove a specific IPv6 neighbor.

NOTE: The :: notation specifies successive hexadecimal fields of zero.

interface interface

To remove all neighbor entries learned on a specific interface, enter the keyword interface then the interface type and slot/port or number information of the interface:

For a Fast Ethernet interface, enter the keyword fastEthernet then the slot/port information.
For a Port Channel interface, enter the keywords port-channel then a number.
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.
For a VLAN, enter the keyword vlan then the VLAN ID. The range is from 1 to 4094.

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.