Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show interfaces status

Displays a summary of interface information or specify a stack unit and interface to display status information for that specific interface only.

Syntax

show interfaces [ interface | stack-unit unit-number] status

Parameters

interface	(OPTIONAL) Enter one of the following keywords and slot/port or number information: For a 10-Gigabit Ethernet interface, enter the keyword `TenGigabitEthernet` followed by the slot/port information.
unit-number	Enter the stack unit’s ID number. The range is from 0 to 5.

NOTE: This command also enables you to view information corresponding to a range of ports.
- You can specify multiple ports as slot/port-range. For example, if you want to display information corresponding to all ports between 1 and 4, specify the port range as show interfaces interface-type 1/1 - 4.

Defaults

none

Command Modes

EXEC
EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM and added support to display the interface configurations corresponding to a range of ports.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Example

Dell#sh interfaces status
                                             Port         Description  Status Speed     Duplex Vlan
                                             Te 2/1                    Down   Auto      Auto   --
                                             Te 2/2                    Down   Auto      Auto   --
                                             Te 2/3                    Down   Auto      Auto   --
                                             Te 2/4                    Down   Auto      Auto   --
                                             Te 2/5                    Down   Auto      Auto   --
                                             Te 2/6                    Down   Auto      Auto   --
                                             Te 2/7                    Down   Auto      Auto   --
                                             Te 2/8                    Down   Auto      Auto   --
                                             Te 2/9                    Up     10000 Mbit Full   1001
                                             Te 2/10                   Down   Auto      Auto   --
                                             Te 2/11                   Up     10000 Mbit Full   1001
                                             Te 2/12                   Down   Auto      Auto   --
                                             Dell#