- Notes, cautions, and warnings
- Revision history
- Introduction
- Before you begin
- VxRail deployment overview
- VxRail Configuration Portal overview
- Pre-deployment tasks
- Install VxRail hardware
- Deploy VxRail
- Post-deployment tasks
Each VxRail management component that is deployed on the VxRail external management network requires an IP address.
Reserve all IP addresses from the same subnet. The IP addresses can be assigned individually or from a pool, and are assigned to the VxRail components during the initialization part of deployment.
For information about allocating and confirming the IP addresses, see:
The following components must be assigned an IP address in the external management subnet:
The following components require their own IP subnet:
Ensure that you can reach the IP addresses of the following data center services from the IP address that is assigned to the VxRail Manager: