Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

advertise-interval

Set the time interval between VRRP advertisements.

Syntax

advertise-interval { seconds | centisecs centisecs}

To return to the default settings, use the no advertise-interval command.

Parameters

seconds	Enter a number of seconds. The range is from 1 to 255. The default is 1 second.
centisecs centisecs	Enter the keyword `centisecs` followed by the number of centisecs in multiple of 25 centisecs. The range is `25` to `4075` centisecs in multiples of `25` centisecs.

Defaults

1 second or 100 centisecs

Command Modes

INTERFACE-VRRP

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.5(0.0)	Introduced the support for centisecs on the MXL 10/40GbE Switch .
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

Dell Networking OS recommends keeping the default setting for this command. If you do change the time interval between VRRP advertisements on one router, change it on all routers.