Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

ip multicast-routing

Enable IP multicast forwarding.

Syntax

ip multicast-routing

To disable multicast forwarding, use the no ip multicast-routing command.

Defaults

Disabled.

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

After you enable multicast, you can enable IGMP and PIM on an interface. In INTERFACE mode, enter the ip pim sparse-mode command to enable IGMP and PIM on the interface.

Related Commands

ip pim sparse-mode — enables IGMP and PIM on an interface.