Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

debug ipv6 ospf

Display debug information and interface types on OSPF IPv6 packets or events.

Syntax

debug ipv6 ospf {packet | events} [ interface]

Parameters

interface

(OPTIONAL) Enter one of the following keywords and slot/port or number information:

For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.
For a Port Channel interface, enter the keyword port-channel then a number. The range is 1 to 128.
For a tunnel interface, enter the keyword tunnel then a number. The range is 1 to 16383.
For a VLAN, enter the keyword vlan then a number from 1 to 4094.

Command Modes

EXEC Privilege

Supported Modes

Full—Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.