Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show command-history

Display a buffered log of all commands all users enter along with a time stamp.

Syntax

show command-history

Defaults

None

Command Modes

EXEC
EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Usage Information

One trace log message is generated for each command. No password information is saved to this file.

Example

Dell#show command-history
                                             [4/20 10:27:23]: CMD-(CLI):[enable]by default from console
                                             [4/20 10:27:23]: CMD-(CLI):[configure terminal]by default from console
                                             - Repeated 1 time.
                                             [4/20 10:27:23]: CMD-(CLI):[snmp-server community public ro]by default from
                                             console
                                             [4/20 10:27:23]: CMD-(CLI):[logging 172.16.1.162]by default from console
                                             [4/20 10:27:23]: CMD-(CLI):[logging 10.10.10.4]by default from console
                                             [4/20 10:27:24]: CMD-(CLI):[logging 10.1.2.4]by default from console
                                             [4/20 10:27:24]: CMD-(CLI):[logging 172.31.1.4]by default from console
                                             [4/20 10:27:24]: CMD-(CLI):[logging 133.33.33.4]by default from console
                                             [4/20 10:27:24]: CMD-(CLI):[management route 172.16.1.0 /24 10.11.209.4]by default
                                             from console
                                             [4/20 10:27:24]: CMD-(CLI):[service timestamps log datetime]by default from
                                             console
                                             [4/20 10:27:24]: CMD-(CLI):[line console 0]by default from console
                                             [4/20 10:27:24]: CMD-(CLI):[exec-timeout 0]by default from console
                                             [4/20 10:27:24]: CMD-(CLI):[exit]by default from console
                                             [4/20 10:27:29]: CMD-(CLI):[show version]by default from console
                                             [4/20 10:27:56]: CMD-(CLI):[show interfaces tengigabitethernet 0/3]by default from
                                             console
                                             [4/20 10:55:8]: CMD-(CLI):[show lldp neighbors]by default from console
                                             [4/20 15:17:6]: CMD-(CLI):[show cam-acl]by default from console
                                             [4/20 16:34:59]: CMD-(CLI):[show running-config interface tengigabitethernet 0/
                                             55]by default from console
                                             [4/20 16:38:14]: CMD-(CLI):[show vlan]by default from console
                                             [5/4 9:11:52]: CMD-(TEL0):[show version]by admin from vty0 (10.11.68.14)
                                             [5/4 9:12:9]: CMD-(TEL0):[show hosts]by admin from vty0 (10.11.68.14)
                                             [5/4 9:14:38]: CMD-(TEL0):[show arp]by admin from vty0 (10.11.68.14)
                                             [5/4 9:19:29]: CMD-(TEL0):[enable]by admin from vty0 (10.11.68.14)
                                             [5/4 9:19:35]: CMD-(TEL0):[configure]by admin from vty0 (10.11.68.14)
                                             - Repeated 1 time.
                                             [5/4 9:19:50]: CMD-(TEL0):[interface tengigabitethernet 0/16]by admin from vty0
                                             (10.11.68.14)
                                             [5/4 9:20:11]: CMD-(TEL0):[exit]by admin from vty0 (10.11.68.14)
                                             Dell#

Related Commands

clear command history — clears the command history log.