Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

clear ip bgp * (asterisk)

Reset all BGP sessions in the specified category. The soft parameter (BGP Soft Reconfiguration) clears the policies without resetting the TCP connection.

Syntax

clear ip bgp * [ipv4 multicast soft [in | out] | ipv6 unicast soft [in | out] | soft [in | out]]

Parameters

*	Enter an asterisk ( `*` ) to reset all BGP sessions.
ipv4 multicast soft [in \| out]	(OPTIONAL) Enter the keywords `ipv4 multicast soft [in \| out]` to set options within the specified IPv4 address family.
ipv6 unicast soft [in \| out]	(OPTIONAL) Enter the keywords `ipv6 multicast soft [in \| out]` to set options within the specified IPv6 address family.
soft	(OPTIONAL) Enter the keyword `soft` to configure and activate policies without resetting the BGP TCP session, that is, BGP Soft Reconfiguration. NOTE: If you enter `clear ip bgp ip6-address soft`, both inbound and outbound policies are reset.
in	(OPTIONAL) Enter the keyword `in` to activate only inbound policies.
out	(OPTIONAL) Enter the keyword `out` to activate only outbound policies.

Command Modes

EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.