Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

ip ssh rhostsfile

Specify the rhost file used for host-based authorization.

Syntax

ip ssh rhostsfile { WORD}

Parameters

WORD

Enter the rhost file name for the host-based authentication.

Defaults

none

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Example

Dell#conf
                                             Dell(conf)# ip ssh rhostsfile flash://shosts
                                             Dell(conf)#

Usage Information

This command specifies the rhost file used for host-based authentication. This creates/ file overwrites the flash:/ADMIN_DIR/ssh/shosts file and deletes the user-specified file. Even though this command is a global configuration command, it does not appear in the running configuration because you only need to run this command once.

This file contains hostnames and usernames, for which hosts and users, rhost-authentication can be allowed.

NOTE: For rhostfile and pub-key-file, the administrator must FTP the file to the switch.