Inspiron 7391 2n1 Service Manual

Procedure

1. Loosen the two captive screws that secure the base cover to the palm-rest assembly.
2. Remove the six screws (M2x4) that secure the base cover to the palm-rest assembly.
   
3. Using a plastic scribe, pry the base cover from the tabs on the hinges and continue to pry the base cover from the slots on the palm-rest assembly.
   CAUTION Do not pry the base cover from the middle as it might damage the chassis.
4. Carefully remove the base cover off the palm-rest assembly.
   

   NOTE Disconnect the battery cable only when you continue to remove other components from your computer.
5. Disconnect the battery cable from the system board.