Inspiron 7391 2n1 Service Manual

Procedure

1. Slide the touchpad into the slot on the palm-rest assembly.
2. Replace the two screws (M1.6x2) that secure the touchpad to the palm-rest assembly.
3. Adhere the tapes that secure the touchpad to the palm-rest assembly.
4. Adhere the touchpad cable to palm-rest assembly and slide the touchpad cable into the connector on the touch pad and close the latch to secure the cable.
5. Align the screw holes on the touchpad bracket with the screw holes on the palm-rest assembly.
6. Replace the three screws (M2x3) that secure the touchpad bracket to the palm-rest assembly.
7. Adhere the tapes that secure the touch-pad assembly to the palm-rest assembly.