Inspiron 7391 2n1 Service Manual

Procedure

1. Peel the fingerprint-reader cable from the keyboard bracket.
2. Peel the tapes that secure the antenna cables to the keyboard bracket.
3. Remove the antenna cables from the routing guides on the keyboard bracket.
   
4. Remove the 29 screws (M1.2x1.8) that secures the keyboard bracket to the keyboard.
   NOTE Lift the plastic sheet on the keyboard bracket to access the screws.
5. Lift the keyboard bracket off the keyboard.
   
6. Remove the 4 screws (M1.2x1.8) that secure the keyboard to the palm-rest assembly.
7. Lift the keyboard off the palm-rest assembly.