Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Event and Error Message Reference Guide For 13th Generation Dell PowerEdge Servers Version 1.0

PDF

LC Event Messages

LC001

Message
Command successful.
Detailed Description
The command completed successfully.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC002

Message
General failure.
Detailed Description
A general failure occurred while executing the command.
Recommended Response Action
Verify network connectivity. If failure persists, reset the iDRAC to resolve the issue.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC003

Message
Failed to change the firmware update mode.
Detailed Description
An error occurred while trying to set the firmware update mode.
Recommended Response Action
Verify that the firmware version supports this mode. Also confirm that the command and parameters are correct. The parameter choices are: 1) Disable (default) 2) Allow version upgrade only 3) Match firmware of replaced part.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC004

Message
Provisioning Server information is not formatted correctly.
Detailed Description
The Provisioning Server parameter information is not formatted correctly.
Recommended Response Action
Verify the string format. Enter a valid IP address or hostname for the Provisioning Server such as: 1) hostname 2) hostname.domain.com 3) 1.1.1.1 4) hostname:8080 5) hostname.dell.com:8080 6) hostname1:80,hostname2:8080
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC005

Message
Invalid firmware update mode.
Detailed Description
The value provided for the update mode parameter is invalid.
Recommended Response Action
Verify that the correct firmware update mode was entered. The choices are: 1) Disable (default) 2)Allow version upgrade only 3) Match firmware of replaced part.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC006

Message
Invalid Auto-Discovery action.
Detailed Description
The Auto-Discovery action selected is invalid.
Recommended Response Action
Verify that the selected Auto-Discovery action is supported. The supported commands are documented in the Lifecycle Controller User Guide.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC007

Message
Invalid Parameter.
Detailed Description
One of the parameters specified in the method is invalid.
Recommended Response Action
Verify that the parameters specified are correct. For a list of parameters for this method refer to the Lifecycle Controller User Guide.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC008

Message
Unsupported method parameter value.
Detailed Description
The parameter value is not supported.
Recommended Response Action
Confirm that the parameters provided are correct. For a list of parameters for this method refer to the Lifecycle Controller User Guide.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC009

Message
Insufficient method parameters.
Detailed Description
There were insufficient parameters specified for this command.
Recommended Response Action
Confirm that the parameters provided are correct. For a list of parameters for this method refer to the Lifecycle Controller User Guide.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC010

Message
Certificate imported successfully.
Detailed Description
The communications encryption certificate was imported successfully.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC0100

Message
Lifecycle Controller has entered Recovery mode.
Detailed Description
A persistent error has occurred while carrying out a Lifecycle Controller operation. This situation causes Lifecycle Controller to enter Recovery mode. Any remote jobs pending execution were cancelled.
Recommended Response Action
To verify or change Recovery mode, use F2 Setup, select iDRAC Configuration, and select Lifecycle Controller Settings. Updating Lifecycle Controller clears the Recovery mode.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC0101

Message
Lifecycle Controller action was cancelled by a user.
Detailed Description
A user cancelled Lifecycle Controller actions. Any remote jobs pending execution were cancelled.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC011

Message
Certificate import operation failed.
Detailed Description
There was a general failure in the certificate import process.
Recommended Response Action
Try one of the following: 1) Rerun the command. 2) Reset iDRAC and run the command.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC012

Message
Another process is using Lifecycle Controller.
Detailed Description
Lifecycle Controller is in use by another process. Wait for other process to complete before attempting to run another command.
Recommended Response Action
Try one of the following: 1) Rerun the command after about 2 minutes. 2) Make sure that Lifecycle Controller Unified Server Configurator or an Update Package is not currently running on the server 3) Reset iDRAC and rerun the command.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC013

Message
A configuration job cannot be created because there are no pending values to change.
Detailed Description
No changes are available between the previous configuration and the current configuration. At least one attribute should be changed to create a configuration job.
Recommended Response Action
Change the configuration of one or more attributes before creating a configuration job.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC014

Message
Maximum comment length is 255 characters.
Detailed Description
Maximum comment length is 255 characters.
Recommended Response Action
Limit the number of characters in the comment to 255 characters.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC015

Message
Invalid Part Configuration Update
Detailed Description
Invalid current attribute value
Recommended Response Action
Check for correct parameter values: 1) Disabled 2) Apply always 3) Apply only if firmware match.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC016

Message
Missing required parameter, arg1 .
Arguments
  • arg1 = parameter
Detailed Description
A required method argument was missing.
Recommended Response Action
Include all the parameters required for the command. Check Lifecycle Controller Profile documentation and try again.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC017

Message
Invalid value for the parameter, arg1 .
Arguments
  • arg1 = parameter
Detailed Description
A parameter value provided when the method was invoked is not valid.
Recommended Response Action
Verify that parameter values provided to the method are typed as they appear in the enumeration and that the parameter data type matches the Lifecycle Controller Profile documentation.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC018

Message
Server certificate successfully modified. iDRAC will now restart and be unavailable during restart.
Detailed Description
The certificate modification operation was successful. Communication to iDRAC will be lost as iDRAC restarts to use the new server certificate.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC019

Message
Base64 decode of PKCS12 content was not successful.
Detailed Description
The PKCS12 string could not be decoded from the Base64 encoding into a PKCS12 binary file.
Recommended Response Action
Validate that the contents of the PKCS12 parameter is base64 encoded.  Openssl can be used to validate the encoding.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC020

Message
PKCS12 decrypt of the certificate could not complete.
Detailed Description
The contents of the PKCS12 parameter was not valid because: 1) not a valid PKCS12 file 2) not a valid pfx file 3) did not contain a certificate that matched the private key in the file.
Recommended Response Action
Validate that the PKCS12 content was Base64 encoded. OpenSSL can be used to create or validate a PKCS12 encoding.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC021

Message
PKCS12 decrypt of private key could not complete.
Detailed Description
The contents of the PKCS12 parameter was not valid because: 1) not a valid PKCS12 file 2) not a valid pfx file 3) did not contain a valid key.
Recommended Response Action
Validate that the PKCS12 file was Base64 encoded. OpenSSL can be used to create or validate a PKCS12 file.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC022

Message
Lifecycle Controller Log Export was successful.
Detailed Description
The Lifecycle Controller Log was successfully exported to the destination specified.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC023

Message
Cannot access network share.
Detailed Description
Credentials or network share identity information provided did not result in a network connection being established.
Recommended Response Action
Check network share access credentials (IP address, user name, password, share type, and so on). Refer to Lifecycle Controller Profile documentation for more details.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC024

Message
Unable to retrieve Lifecycle Controller Log records.
Detailed Description
Unable to retrieve Lifecycle Controller Log records because of an issue internal to the firmware.
Recommended Response Action
Do one of the following: 1) Try the operation again 2) AC power cycle the system 3) apply the latest firmware update packages for Lifecycle Controller and iDRAC.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC025

Message
Insufficient space on network share.
Detailed Description
Insufficient space on network share.
Recommended Response Action
Make more space available on the network share and try the operation again.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC026

Message
Lifecycle Controller Log Export method is not supported.
Detailed Description
This method is not supported in this version of the iDRAC firmware.
Recommended Response Action
Update the iDRAC firmware to a version that supports the log export.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC027

Message
The Hardware Inventory file export was successful.
Detailed Description
The Hardware Inventory XML file export operation was successful.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC028

Message
Unable to retrieve Hardware Inventory information.
Detailed Description
Hardware Inventory information is not retrievable due to an internal error.
Recommended Response Action
Try one of the following: 1) Try the operation again 2) AC power cycle system 3) apply the latest firmware update packages for Lifecycle Controller and iDRAC.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC029

Message
Invalid file path specified.
Detailed Description
An invalid File Path was specified in the export operation.
Recommended Response Action
Correct the specified file path and try again.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC030

Message
The file path is to a read-only file system.
Detailed Description
The file path specified for the operation is a read-only file system.
Recommended Response Action
Enable write access to the file path and try again.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC031

Message
Internal error occurred while exporting inventory.
Detailed Description
An internal error occurred while exporting the Hardware Inventory XML file.
Recommended Response Action
Reset iDRAC and retry the command.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC032

Message
The Hardware Inventory Export method not supported.
Detailed Description
This method is not supported in the current version of iDRAC firmware.
Recommended Response Action
Update the iDRAC firmware to a version that supports this method.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC033

Message
As-Shipped Hardware Inventory export was successful.
Detailed Description
The Hardware Inventory XML file representing the system configuration as shipped from the factory was successful.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC034

Message
Unable to retrieve As-Shipped Hardware Inventory from the system.
Detailed Description
The As-Shipped from the factory Hardware Inventory information is not present on the system.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC035

Message
As-Shipped Hardware Inventory Export method is not supported.
Detailed Description
This method is not supported in this version of Firmware.
Recommended Response Action
Update the iDRAC firmware to a version that supports this method.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC036

Message
Lifecycle Controller is not enabled.
Detailed Description
The Lifecycle Controller has been disabled through the iDRAC configuration utility accessed by pressing CTRL+E on boot up or through a remote command.
Recommended Response Action
Use the iDRAC configuration utility to enable the Lifecycle Controller by pressing on the CTRL+E option on boot up at the targeted system.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC037

Message
An instance of Lifecycle Controller Log Export is already running.
Detailed Description
Lifecycle Controller is locked by another instance of Lifecycle Controller Log Export operation. Wait for that operation to complete before attempting to run another command.
Recommended Response Action
Do one of the following: 1) Wait approximately 2 minutes and retry the operation. 2) Reset iDRAC and retry the operation.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC038

Message
An instance of Hardware Inventory export is already in progress.
Detailed Description
Lifecycle Controller is locked by another instance of the Hardware Inventory export process. Allow the process to complete before attempting another export operation.
Recommended Response Action
Do one of the following: 1) Rerun the command after about 2 minutes 2) Reset the iDRAC and rerun the command.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC039

Message
An instance of As-Shipped Inventory export is already in progress.
Detailed Description
Lifecycle Controller is locked by another instance of the As-Shipped Inventory export process. Allow the process to complete before attempting another export operation.
Recommended Response Action
Do one of the following: 1) Rerun the command after about 2 minutes 2) Reset iDRAC and rerun the command.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC040

Message
Memory resource allocation failure.
Detailed Description
Unable to allocate required memory to perform the operation.
Recommended Response Action
Power cycle system and retry the operation. If the problem persists, reapply firmware packages for Lifecycle Controller and iDRAC.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC041

Message
Console name configure failed
Detailed Description
The length of the Console name exceeds the maximum length allowed or the file operation error encountered.
Recommended Response Action
Change the name of a console to a name less than 32 characters.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC042

Message
Configure Console name in FlexAddr mode
Detailed Description
Configure Console name while Virtual Address Management is in FlexAddr mode.
Recommended Response Action
Configure the Virtual Address Management to Console mode, and then configure the name of a console.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC043

Message
Work note contains non-printable or reserved characters.
Detailed Description
Work notes cannot include non-printable or reserved characters, such as &, <, >, /.
Recommended Response Action
Do not use non-printable characters or reserved characters such as &, <, >, and /.
Category
Updates
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC044

Message
An instance of Lifecycle Controller system configuration wipe is already running.
Detailed Description
The Lifecycle Controller system configuration wipe operation is currently running. The operation deletes user information from system hardware and resets BIOS, iDRAC and Lifecycle Controller to default settings. The current operation and system restart must complete before the operation can be attempted again.
Recommended Response Action
Wait for the Lifecycle Controller system configuration wipe operation that is currently running to complete before requesting another operation.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC045

Message
An instance of CreateConfigJob is already running.
Detailed Description
The CreateConfigJob operation is currently running. The current operation and system restart must complete before the operation can be attempted again.
Recommended Response Action
Wait for the CreateConfigJob operation that is currently running to complete before requesting another operation.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC046

Message
An instance of DownloadServerPublicKey is already running.
Detailed Description
The DownloadServerPublicKey operation is in progress. The operation may take a few minutes to complete before the operation can be attempted again.
Recommended Response Action
Wait a few minutes before retrying retry the operation.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC047

Message
An instance of DownloadClientCerts is already running.
Detailed Description
The DownloadClientCerts operation is in progress. The operation may take a few minutes to compete before the operation can be attempted again.
Recommended Response Action
Wait a few minutes before retrying retry the operation.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC048

Message
Invalid input value for IPChangeNotifyPS.
Detailed Description
The value provided to set the attribute identified in the message is invalid.
Recommended Response Action
For more information on the valid values, see Lifecycle Controller-Remote Services documentation. Retry the operation with a valid value for the IPChangeNotifyPS attribute.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC049

Message
Invalid value for VirtualAddressManagement.
Detailed Description
The value provided to set the attribute identified in the message is invalid.
Recommended Response Action
For more information on the valid values, see Lifecycle Controller-Remote Services documentation. Retry the operation with a valid value for the VirtualAddressManagement attribute.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC050

Message
Invalid value for SystemServicesState.
Detailed Description
The value provided to set the attribute identified in the message is invalid.
Recommended Response Action
For more information on the valid values, see Lifecycle Controller-Remote Services documentation. Retry the operation with a valid value for the SystemServicesState attribute.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC051

Message
Cannot create multiple Server Profile Export jobs.
Detailed Description
There can only be one Server Profile Export job at a time.
Recommended Response Action
Wait for the existing Server Profile Export job to run and complete or cancel it, before retrying the operation.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC052

Message
Cannot create multiple Server Profile Import jobs.
Detailed Description
There can only be one Server Profile Import job at a time.
Recommended Response Action
Wait for the existing Server Profile Import job to run and complete or cancel it, before retrying the operation.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC053

Message
Lifecycle Controller Remote Services is currently unavailable.
Detailed Description
Lifecycle Controller Remote Service is either not ready or currently reloading server information.
Recommended Response Action
Retry the operation. If the issue persists, refer to Lifecycle Controller-Remote Services documentation for more information.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC054

Message
Unable to write to the network share.
Detailed Description
The network share may be read-only or it may not have sufficient space for the export operation.
Recommended Response Action
Verify the network share is not read-only and has sufficient space for exporting, then retry the operation.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC055

Message
The operation did not complete successfully because of an invalid attribute array.
Detailed Description
The operation did not complete successfully because the number of AttributeName input parameters provided to the method exceeded the number of attributes available in iDRAC.
Recommended Response Action
Retry the operation with an input parameter array that matches the available attributes in iDRAC.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC056

Message
AttributeName and AttributeValue count mismatch.
Detailed Description
The name value pairs in the input parameter arrays do not match in the input.
Recommended Response Action
Retry the operation with a valid (AttributeName, AttributeValue) pair.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC057

Message
Invalid AttributeName parameter value.
Detailed Description
The attribute name provided is not valid for the current method.
Recommended Response Action
Retry the operation with a valid AttributeName parameter value.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC058

Message
Invalid AttributeValue parameter value for corresponding AttributeName value, arg1 .
Arguments
  • arg1 = AttributeName
Detailed Description
The attribute value specified in the AttributeValue array is not valid for the corresponding specified attribute.
Recommended Response Action
Retry the operation with a valid attribute value for the corresponding specified attribute.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC059

Message
Cannot set read only attribute specified in AttributeName arg1 .
Arguments
  • arg1 = parameter
Detailed Description
The attribute specified is read only and the value cannot be changed.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC060

Message
Lifecycle controller is currently not ready to take provisioning requests
Detailed Description
Lifecycle controller is currently performing tasks and another task cannot be scheduled until the previous task finishes.
Recommended Response Action
Wait until Lifecycle controller finishes performing current tasks and host system to finish POST.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC061

Message
Lifecycle controller is ready to take provisioning requests
Detailed Description
Jobs, invoke methods, enumerates can now be performed on Lifecycle controller. Lifecycle controller is ready to take provisioning requests.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC062

Message
Export or Import server profile operation is already running.
Detailed Description
Export or Import server profile operation is already running. The operation may take a few minutes to compete.
Recommended Response Action
To retry the operation, wait for a few minutes.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC063

Message
Cannot create new jobs until the existing running jobs are completed or deleted.
Detailed Description
All jobs must be completed before creating a new job.
Recommended Response Action
Retry after all the existing jobs are completed or deleted.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC064

Message
The value exceeds the maximum length of arg1 characters for arg2 .
Arguments
  • arg1 = max parameter length
  • arg2 = parameter name
Detailed Description
The maximum number of characters allowed for the parameter is displayed.
Recommended Response Action
Reduce the number of characters to the maximum length allowed for this parameter.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC065

Message
The iDRAC static IP address information is not fully configured. The missing attribute InstanceID is arg1 .
Arguments
  • arg1 = attribute key
Detailed Description
The static IPv4 information for the iDRAC represented by the related iDRACCard Attributes must be configured correctly.
Recommended Response Action
Configure the iDRAC static IP address information by setting the related iDRACCard Attributes. The related attributes that must be configured are the following:: 1) In the IPv4 group: Address, NetMask, Gateway, DNS1 2) In the NIC Static group: DNSDomainName.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC066

Message
The Export Certificate operation is currently running.
Detailed Description
The Export Certificate operation is already running and may take a few minutes to complete.
Recommended Response Action
Wait until the current operation is complete and then retry the operation.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC067

Message
Successfully exported SSL Certificate.
Detailed Description
The Export Certification operation successfully exported the SSL Certificate.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC068

Message
Unable to perform the import or export operation because there are pending attribute changes or a configuration job is in progress.
Detailed Description
The import or export system configuration operation cannot be performed because there are pending attribute changes or a configuration job is in progress.
Recommended Response Action
Apply or cancel any pending attribute changes. Changes can be applied by creating a targeted configuration job, or the changes can be cancelled by invoking the DeletePendingConfiguration method. If a configuration job is in progress, wait until it is completed before retrying the import or export system configuration operation.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC069

Message
Certificate does not exist.
Detailed Description
The certificate does not exist for export or delete operation.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC070

Message
Unable to find the configuration XML import file.
Detailed Description
The configuration XML file used for the import operation does not exist on the specified network share.
Recommended Response Action
Make sure the input configuration XML file for the operation exists on the network share.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC071

Message
The Lifecycle Controller version does not support the export or import of the Server Configuration XML file.
Detailed Description
Unable to export or import server configuration XML because the Lifecycle Controller version on the target does not support this feature.
Recommended Response Action
Update the Lifecycle Controller version on the target system to a version that supports the export and import server configuration XML feature, and retry the operation.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC072

Message
An SSL Certificate is successfully generated.
Detailed Description
An SSL Certificate is successfully generated in response to the requested operation.
Recommended Response Action
Download the SSL Certificate and get it signed by an authority..
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC073

Message
Unable to generate an SSL Certificate because one or more mandatory security attributes are invalid.
Detailed Description
An SSL Certificate cannot be generated because one or more mandatory security attributes are invalid.
Recommended Response Action
Make sure that the security attributes are valid and retry the operation.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC074

Message
The Certificate export operation did not complete successfully.
Detailed Description
The Certificate export operation did not complete successfully.
Recommended Response Action
Retry the operation. If the issue persists, restart the iDRAC and retry the operation.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC075

Message
The Custom Signed Certificate (CSC) is deleted successfully. iDRAC will now restart and be unavailable during restart
Detailed Description
Deleting the custom signed certificate should regenerate a new unique certificate . Reset iDRAC to apply new certificate. Until iDRAC is reset old certificate will be active
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC076

Message
Unable to perform the Custom Signed Certificate (CSC) certificate delete operation.
Detailed Description
Unable to perform the Custom Signed Certificate (CSC) certificate delete operation. This may be due to IPMI communications issues.
Recommended Response Action
Retry the operation. If the issue persists, restart the iDRAC and retry the operation.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

LC077

Message
Certificate imported successfully.Reset iDRAC to apply new certificate. Until iDRAC is reset old certificate will be active
Detailed Description
The new certificate will not be in-use until iDRAC has been restarted
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
LC = Lifecycle Contr
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\