Event and Error Message Reference Guide For 13th Generation Dell PowerEdge Servers Version 1.0

UEFI0000

Message: CPU Exception Type 0x00: Divide by Zero (Software).
Detailed Description: A CPU type 0x00, divide by zero exception, (type 0x00) occurred in the pre-boot UEFI environment. The software attempted to do a mathematical divide by zero, an illegal operation.
Recommended Response Action: Recently installed hardware or updated software may cause this exception.Update or remove the hardware or software.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0001

Message: CPU Exception Type 0x03: Breakpoint (Software).
Detailed Description: A CPU software breakpoint exception (type 0x03) occurred in the pre-boot UEFI environment. The software used it for debugging purposes.
Recommended Response Action: Recently installed hardware or updated software may cause this exception. Update or remove the hardware or software.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0002

Message: CPU Exception Type 0x04: Overflow (Software).
Detailed Description: A CPU overflow exception (type 0x04) occurred in the pre-boot UEFI environment.
Recommended Response Action: Recently installed hardware or updated software may cause this exception. Update or remove the hardware or software.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0003

Message: CPU Exception Type 0x05: BOUND Range Exceeded (Software).
Detailed Description: A CPU bound range exceeded exception (type 0x05) occurred in the pre-boot UEFI environment.
Recommended Response Action: Recently installed hardware or updated software may cause this exception. Update or remove the hardware or software.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0004

Message: CPU Exception Type 0x06: Invalid Opcode (Software).
Detailed Description: A CPU invalid opcode exception (type 0x06) occurred in the pre-boot UEFI environment. The software attempted to execute invalid code.
Recommended Response Action: Recently installed hardware or updated software may cause this exception. Update or remove the hardware or software.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0005

Message: CPU Exception Type 0x07: Math Coprocessor Not Available (Hardware).
Detailed Description: A CPU math coprocessor not available (type 0x07) exception occurred in the pre-boot UEFI environment.
Recommended Response Action: Recently installed hardware or updated software may cause this exception. Update or remove the hardware or software.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0006

Message: CPU Exception Type 0x08: Double Fault (Software).
Detailed Description: A CPU double fault exception (type 0x08) occurred.
Recommended Response Action: Recently installed hardware or updated software may cause this exception. Update or remove the hardware or software.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0007

Message: CPU Exception Type 0x09: Coprocessor Segment Overrun (Software).
Detailed Description: A CPU coprocessor segment overrun exception (type 0x09) occurred in the pre-boot UEFI environment.
Recommended Response Action: Recently installed hardware or updated software may cause this exception. Update or remove the hardware or software.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0008

Message: CPU Exception Type 0x0A: Invalid Task Segment State Segment (TSS) (Software).
Detailed Description: A CPU invalid task segment state (TSS) exception (type 0x0A) occurred in the pre-boot UEFI environment.
Recommended Response Action: Recently installed hardware or updated software may cause this exception. Update or remove the hardware or software.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0009

Message: CPU Exception Type 0x0B: Segment Not Present (Software).
Detailed Description: A CPU segment not present exception (type 0x0B) occurred in the pre-boot UEFI environment.
Recommended Response Action: Recently installed hardware or updated software may cause this exception. Update or remove the hardware or software.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0010

Message: CPU Exception Type 0x0C: Stack-Segment Fault (Software).
Detailed Description: A CPU stack-segment fault (type 0x0C) exception occurred in the pre-boot UEFI environment.
Recommended Response Action: Recently installed hardware or updated software may cause this exception. Update or remove the hardware or software.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0011

Message: CPU Exception Type 0x0D: General Protection (Software).
Detailed Description: A CPU general protection (type 0x0D) exception occurred in the pre-boot UEFI environment.
Recommended Response Action: Recently installed hardware or updated software may cause this exception. Update or remove the hardware or software.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0012

Message: CPU Exception Type 0x0E: Page Fault (Software).
Detailed Description: A CPU page fault (type 0x0E) exception occurred in the pre-boot UEFI environment. A program accessed a page mapped in the virtual address space, but not loaded in physical memory.
Recommended Response Action: Recently installed hardware or updated software may cause this exception. Update or remove the hardware or software.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0013

Message: CPU Exception Type 0x10: Floating Point Error (Software).
Detailed Description: A CPU floating point error (type 0x10) exception occurred in the pre-boot UEFI environment.
Recommended Response Action: Recently installed hardware or updated software may cause this exception. Update or remove the hardware or software.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0014

Message: CPU Exception Type 0x11: Alignment Check (Software).
Detailed Description: A CPU alignment check exception (type 0x11) occurred in the pre-boot UEFI environment.
Recommended Response Action: Recently installed hardware or updated software may cause this exception. Update or remove the hardware or software.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0015

Message: Lifecycle Controller (LC) firmware was not accessible and is therefore in Recovery mode.
Detailed Description: The BIOS is unable to access the Lifecycle Controller firmware. No Lifecycle Controller functionality is available while in Recovery Mode.
Recommended Response Action: Perform the following actions: 1)Reboot the system. 2) Press F2 during boot to enter System Setup. 3) Select iDRAC Settings then Lifecycle Controller. 4) Change Lifecycle Controller back to Enabled. If subsequent failures occur, press and hold the system ID button down for 15 seconds to reset the iDRAC. For more information on how to reset iDRAC, see iDRAC Users Guide.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0016

Message: Lifecycle Controller (LC) firmware was not accessible and is therefore in Recovery mode.
Detailed Description: Unable to find a Lifecycle Controller partition. No Lifecycle Controller functionality is available while in Recovery Mode.
Recommended Response Action: Perform the following actions: 1)Reboot the system. 2) Press F2 during boot to enter System Setup. 3) Select iDRAC Settings then Lifecycle Controller. 4) Change Lifecycle Controller back to Enabled. If subsequent failures occur, press and hold the system ID button down for 15 seconds to reset the iDRAC. For more information on how to reset iDRAC, see iDRAC Users Guide.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0017

Message: Lifecycle Controller (LC) firmware was not accessible and is therefore in Recovery mode.
Detailed Description: Unable to locate a file required to run Lifecycle Controller. No Lifecycle Controller functionality is available while in Recovery Mode.
Recommended Response Action: Repair Lifecycle Controller firmware using the Lifecycle Controller Dell Update Package (DUP) or Lifecycle Controller Repair Package via iDRAC. For more information, see Lifecycle Controller Users Guide.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0018

Message: Lifecycle Controller (LC) is unable to complete a requested task or function and therefore is in Recovery Mode.
Detailed Description: An internal error occurred. No Lifecycle Controller functionality is available while in Recovery Mode.
Recommended Response Action: Repair Lifecycle Controller firmware using the Lifecycle Controller Dell Update Package (DUP) or Lifecycle Controller Repair Package via iDRAC. For more information, see Lifecycle Controller Users Guide.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0019

Message: Lifecycle Controller (LC) is unable to complete a requested task or function and prevented the boot process from completing on multiple attempts. LC is in Recovery Mode.
Detailed Description: The system boot process did not complete repeatedly due to problems encountered while performing a Lifecycle Controller task for function. No Lifecycle Controller functionality is available while in Recovery Mode.
Recommended Response Action: Repair Lifecycle Controller firmware using the Lifecycle Controller Dell Update Package (DUP) or Lifecycle Controller Repair Package via iDRAC. For more information, see Lifecycle Controller Users Guide.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0022

Message: Unable to initialize Management Engine because the Management Engine is not responding.
Detailed Description: The Management Engine firmware cannot be initialized because the Management Engine is not responding.
Recommended Response Action: Remove input power from the system, wait for 30 seconds, and re-apply input power. Turn on the system.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0023

Message: BIOS is unable to send the End of POST message to Management Engine because the Management Engine is not responding.
Detailed Description: The End of POST message could not be sent to the Management Engine because the Management Engine is not responding.
Recommended Response Action: Remove input power from the system, wait for 30 seconds, and re-apply input power. Turn on the system.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0024

Message: The Management Engine is not responding.
Detailed Description: The Management Engine firmware is not responding to the BIOSvia the HECI interface.
Recommended Response Action: Remove input power from the system, wait for 30 seconds, and re-apply input power. Turn on the system.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0025

Message: Unable to initialize Management Engine firmware.
Detailed Description: The Management Engine firmware cannot be initialized. The BIOS will reset the system to retry the initialization process.
Recommended Response Action: Wait for the BIOS to reset the system and reinitialize the Management Engine. If the issue persists, turn off the input power to the system and turn on again.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0026

Message: iDRAC is not responding.
Detailed Description: iDrac is not responding to BIOS commands. The BIOS will reset the system to retry the initialization process.
Recommended Response Action: Wait for the BIOS to reset the system and reinitialize the iDRAC. If the issue persists, remove input power from the system, wait for 30 seconds, and re-apply input power. Turn on the system.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0027

Message: The system must be restarted for the new license to become effective.
Detailed Description: A license change for the system or a component in the system requires a system reset in order for the new license to take effect.
Recommended Response Action: Wait for the BIOS to reset the system.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 3 (Informational)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0028

Message: iDRAC is not responding after a recovery system reset was performed.
Detailed Description: The iDRAC is not responding after a recovery system reset was performed. BIOS will continue POST startup with iDRAC in a non functional state.
Recommended Response Action: Remove input power from the system, wait for 30 seconds, and re-apply input power. Turn on the system.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0029

Message: Unable to initialize iDRAC because of some critical issues.
Detailed Description: iDRAC could not be initialized because of some critical issues. Continuing to boot may result in unexpected power loss because of unknown power inventory and unavailability of features such as remote out of band access, active power management, thermal management, inventory collection, LCD, or system error reporting.
Recommended Response Action: Do one of the following: 1) Remove input power from the system, wait for 30 seconds, and re-apply input power. Turn on the system. 2) Update the iDRAC firmware. 3) Continue to boot. Note: This may result in unexpected power loss because of unknown power inventory and unavailability of features such as remote out of band access, active power management, thermal management, inventory collection, LCD, or system error reporting.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0030

Message: A keyboard device is not connected to the system.
Detailed Description: A keyboard device is not connected to the system.
Recommended Response Action: Connect a keyboard device to the system.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0031

Message

PCIe downtrain is detected on arg1 . Expected link width: arg2 Actual link width: arg3

Arguments

arg1 = device location
arg2 = size
arg3 = size

Detailed Description

The PCIe device identified in the message was not trained at the expected link width.

Recommended Response Action

Do one of the following: 1) Remove input power from the system, wait for 30 seconds, and re-apply input power. Turn on the system. 2) Update the firmware on the PCIe device.

Category

System Health

Subcategory

UEFI = UEFI Event

Severity

Severity 1 (Critical)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0032

Message: Unable to initialize the TPM chip because the TPM chip is not functioning.
Detailed Description: The TPM chip cannot be initialized because the TPM chip is not functioning.
Recommended Response Action: Remove input power from the system, wait for 30 seconds, and re-apply input power. Turn on the system.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0033

Message: Default system BIOS settings are in use because NVRAM_CLR jumper is installed on the system board.
Detailed Description: The NVRAM_CLR jumper is installed to clear the BIOS configuration. After clearing the BIOS configuration, remove the NVRAM_CLR jumper so that the system can function normally and any non-default BIOS system setting changes can be persistently saved.
Recommended Response Action: To change the system BIOS settings and persistently save the settings, remove the NVRAM_CLR jumper and then go to the System Setup to configure system settings.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0034

Message: A CMOS battery loss is detected resulting in an invalid BIOS configuration.
Detailed Description: A CMOS battery loss is detected resulting in an invalid BIOS configuration.
Recommended Response Action: Go to the System Setup to configure system settings, system time and date.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0035

Message: The BIOS passwords are disabled because the PWRD_EN jumper is removed from the system board.
Detailed Description: The BIOS passwords are disabled because the PWRD_EN jumper is removed from the system board.
Recommended Response Action: To enable the BIOS passwords, install the PWRD_EN jumper.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 3 (Informational)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0036

Message: Unable to initialize the iDRAC Shared Memory Architecture (SMA) interface.
Detailed Description: The iDRAC Shared Memory Architecture (SMA) interface cannot be initialized. The BIOS will use the Keyboard Controller Style (KCS) interface.
Recommended Response Action: Do one of the following: 1) Remove input power from the system, wait for 30 seconds, and re-apply input power. Turn on the system. 2) Update the iDRAC firmware on the system.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0037

Message: Unable to communicate with iDRAC because of an issue in the iDRAC Shared Memory Architecture (SMA) Intelligent Platform Management Interface (IPMI).
Detailed Description: Unable to communicate with iDRAC because of an issue in the iDRAC Shared Memory Architecture (SMA) Intelligent Platform Management Interface (IPMI). Continuing to boot may result in unexpected power loss because of unknown power inventory and unavailability of features such as active power management, thermal management.
Recommended Response Action: Do one of the following: 1) Remove input power from the system, wait for 30 seconds, and re-apply input power. Turn on the system. 2) Update the iDRAC firmware on the system.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0038

Message: Unable to communicate with iDRAC because of missing interrupts on the Shared Memory Architecture (SMA) interface.
Detailed Description: Unable to communicate with iDRAC because an expected interrupt(s) from the iDRAC SMA (Shared Memory Architecture) interface did not happen. Continuing to boot may result in unexpected power loss because of unknown power inventory and unavailability of features such as active power management, thermal management.
Recommended Response Action: Do one of the following: 1) Remove input power from the system, wait for 30 seconds, and re-apply input power. Turn on the system. 2) Update the iDRAC firmware on the system.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0039

Message: Unable to communicate with iDRAC because of an issue in the iDRAC Keyboard Controller Style (KCS) Intelligent Platform Management Interface (IPMI).
Detailed Description: Unable to communicate with iDRAC because of an issue in the iDRAC Keyboard Controller Style (KCS) Intelligent Platform Management Interface (IPMI). Continuing to boot may result in unexpected power loss because of unknown power inventory and unavailability of features such as remote out of band access, active power management, thermal management, inventory collection, LCD, or system error reporting.
Recommended Response Action: Do one of the following: 1) Remove input power from the system, wait for 30 seconds, and re-apply input power. Turn on the system. 2) Update the iDRAC firmware on the system.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0040

Message: The TXT feature is disabled because of an unexpected issue.
Detailed Description: The TXT has been disabled due to an unexpected issue. Check the SEL (System Event Log) for details of the issue.
Recommended Response Action: Do one of the following: 1) Remove input power from the system, wait for 30 seconds, and re-apply input power. Turn on the system. 2) Update the BIOS firmware on the system. For information about the issue, see System Event Log (SEL).
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0041

Message: Unable to enable the TXT feature because the Virtualization Technology (VT) feature is not enabled on the processor.
Detailed Description: Unable to turn on the TXT feature because the Virtualization Technology (VT) feature is not enabled on the processor.
Recommended Response Action: From System Setup, enable VT, and then enable TXT. If the issue persists, update the system BIOS firmware.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0042

Message: Unable to enable the TXT feature because Trusted Platform Module (TPM) configuration is invalid.
Detailed Description: Unable to enable the TXT feature because Trusted Platform Module (TPM) configuration is invalid.
Recommended Response Action: Go to System Setup > System Security page, select the "On with pre-boot measurement" option for TPM Security, and click the "Activate" option under TPM command. Restart the system, go to System Setup > System Security page, and then enable TXT.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0043

Message: Unable to enable the TXT feature because the processor does not support TXT.
Detailed Description: Unable to enable the TXT feature because the processor does not support TXT.
Recommended Response Action: Install a TXT-capable processor and retry the operation.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0044

Message: Unable to enable the TXT feature because the motherboard chipset does not support TXT.
Detailed Description: Unable to enable the TXT feature because the processor does not support TXT.
Recommended Response Action: Contact your service provider.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0045

Message: Unable to enable the TXT feature because a TPM chip is not present.
Detailed Description: Unable to enable the TXT feature because a TPM chip is not present.
Recommended Response Action: Install a TPM chip module by following the installation procedure. Refer to the platform Owners Manual for more information or contact your service provider.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0046

Message: An issue in observed in the previous invocation of TXT SINIT Authenticated Code Module (ACM) because the TXT information stored in the TPM chip may be corrupted.
Detailed Description: An issue in observed in the previous invocation of TXT SINIT Authenticated Code Module (ACM) because the TXT information stored in the TPM chip may be corrupted.
Recommended Response Action: Do one of the following: 1) Update the BIOS firmware. 2) Go to System Setup > System Security page, click the "Clear" option under TPM command. Restart the system, go to System Setup > System Security page, click the "Activate" option under TPM command, and then enable TXT.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0047

Message: One or more keys in the keyboard is stuck and not functional.
Detailed Description: One or more keys in the keyboard is stuck and not functional.
Recommended Response Action: Make sure that the key is not stuck in the keyboard and retry the operation.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0048

Message: The Collect System Inventory on Restart (CSIOR) operation is not performed during this restart because Lifecycle Controller is not functioning.
Detailed Description: The Collect System Inventory on Restart (CSIOR) operaiton is not performed during this restart because Lifecycle Controller firmware could not be accessed or run properly.
Recommended Response Action: Repair Lifecycle Controller using the Update Package. For more information, see the Lifecycle Controller Users Guide.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0049

Message: Unable to enable the Non-maskable Interrupt (NMI) button because either the NMI button is stuck or iDRAC firmware is not updated.
Detailed Description: The NMI button cannot be enabled because either the NMI button is stuck or iDRAC firmware is not updated.
Recommended Response Action: Correct the NMI button if stuck or update iDRAC firmware on the system.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0050

Message: The process of collecting Brand information is started.
Detailed Description: The rebranding process is started.
Recommended Response Action: No response action is required.
Category: Work Notes
Subcategory: UEFI = UEFI Event
Severity: Severity 3 (Informational)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0051

Message: Brand information is successfully collected. The system is being restarted.
Detailed Description: Brand information is successfully collected. The system is being restarted. The rebranding process is completed.
Recommended Response Action: No response action is required.
Category: Work Notes
Subcategory: UEFI = UEFI Event
Severity: Severity 3 (Informational)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0052

Message: Unable to complete the rebranding operation because of the issue(s) displayed earlier.
Detailed Description: The rebranding process cannot be completed because of the reasons identified on the computer screen.
Recommended Response Action: Do one of the following and retry the operation: 1) Update the iDRAC firmware. 2) Update the system BIOS. 3) Update the OEM ID module.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0053

Message: The debranding process is started.
Detailed Description: The debranding process is started.
Recommended Response Action: No response action is required.
Category: Work Notes
Subcategory: UEFI = UEFI Event
Severity: Severity 3 (Informational)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0054

Message: Debranding process is completed. The system is being restarted.
Detailed Description: Debranding process is completed. The system is being restarted.
Recommended Response Action: No response action is required.
Category: Work Notes
Subcategory: UEFI = UEFI Event
Severity: Severity 3 (Informational)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0055

Message: Unable to complete the debranding operation because of the issue(s) displayed earlier.
Detailed Description: The debranding process cannot be completed because of the reasons identified on the computer screen.
Recommended Response Action: Check the screen display for details of the failure. Retry the debrand process again, or update the system BIOS and then retry.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0056

Message: A PCIe error has occurred.
Detailed Description: The PCIe error is logged during Power-on-Self-Test (POST). The error could have occurred during either the current or the previous POST.
Recommended Response Action: Check the System Event Log (SEL) to identify the PCIe device that is not functioning correctly, and then update the device firmware.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0057

Message: A Machine-Check Exception (MCE) error has occurred.
Detailed Description: The MCE is logged during Power-on-Self-Test (POST). MCE could have occured during either the current or the previous POST.
Recommended Response Action: Check the System Event Log (SEL) to identify Machine-Check Exception (MCE) event source. Resolve the issue identified in the SEL that caused the MCE. For further information, contact your service provider.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0058

Message: An uncorrectable Memory Error has occurred because a Dual Inline Memory Module (DIMM) is not functioning.
Detailed Description: Uncorrectable Memory Error has occurred because a Dual Inline Memory Module (DIMM) is not functioning.
Recommended Response Action: Check the System Event Log (SEL) to identify the non-functioning DIMM, and then replace it.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0059

Message: The Power Supply Units (PSUs) in the system do not match.
Detailed Description: The Power Supply Units (PSUs) in the system do not match.
Recommended Response Action: Check the PSU types and make sure they are appropriately matched, and then retry the operation. For more information, see the platform Owners Manual.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0060

Message: Power required by the system exceeds the power supplied by the Power Supply Units (PSUs).
Detailed Description: Power required by the system exceeds the power supplied by the PSUs. Continuing to restart the system may automatically turn off the system without any notification.
Recommended Response Action: Check the PSU and system configuration, and then upgrade the PSU, if necessary.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0061

Message: The request to change attributes is being processed.
Detailed Description: The request to change one or more attribute(s) is being processed.
Recommended Response Action: No response action is required.
Category: Updates
Subcategory: UEFI = UEFI Event
Severity: Severity 3 (Informational)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0062

Message: One or more attributes are successfully changed.
Detailed Description: One or more attributes were successfully changed.
Recommended Response Action: No response action is required.
Category: Updates
Subcategory: UEFI = UEFI Event
Severity: Severity 3 (Informational)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0063

Message: Unable to change an attribute because of issues in the Attribute Configuration Interface (ACI) data block.
Detailed Description: An attribute cannot be successfully configured because of an issue in the ACI data block.
Recommended Response Action: Check the ACI data block for any invalid configuration dtata and settings, and then retry the operation. If the issue persists, contact your service provider.
Category: Updates
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0064

Message: One or more attributes are successfully configured. The system is being restarted.
Detailed Description: One or more attributes were successfully configured. The system will be automatically restarted.
Recommended Response Action: No response action is required.
Category: Updates
Subcategory: UEFI = UEFI Event
Severity: Severity 3 (Informational)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0065

Message: One or more attributes are successfully configured. The system will be automatically turned off in 5 seconds.
Detailed Description: One or more attributes are successfully configured. The system is automatically turned off in 5 seconds.
Recommended Response Action: No response action is required.
Category: Updates
Subcategory: UEFI = UEFI Event
Severity: Severity 3 (Informational)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0066

Message

A PCIe link training failure is observed in arg1 and the link is disabled. The system has halted.

Arguments

arg1 = PCIe device

Detailed Description

A PCIe Link failure is observed in the device identified in the message and device link is disabled. The system will be halted.

Recommended Response Action

Do one of the following: 1) Turn off the input power to the system and turn on again. 2) Update the PCIe device firmware. If the issue persists, contact your service provider.

Category

System Health

Subcategory

UEFI = UEFI Event

Severity

Severity 1 (Critical)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0067

Message

A PCIe link training failure is observed in arg1 and device link is disabled.

Arguments

arg1 = PCIe device

Detailed Description

A PCIe link failure is observed in the PCIe device identified in the message and device link is disabled.

Recommended Response Action

Do one of the following: 1) Turn off the input power to the system and turn on again. 2) Update the PCIe device firmware. If the issue persists, contact your service provider.

Category

System Health

Subcategory

UEFI = UEFI Event

Severity

Severity 1 (Critical)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0068

Message: The mezzanine card configuration used is not supported on this Chassis.
Detailed Description: The mezzanine card configuration used is not supported on this Chassis. Server modules used in different Chassis may require cards with different configuration properties. For more information, contact your service provider.
Recommended Response Action: Make sure that a supported mezzanine card is used and retry the operation. For more information, see the platform Owners Manual of the Chassis available at the support site.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0069

Message: A CMOS checksum error has occurred. CMOS is reinitialized.
Detailed Description: A CMOS checksum error has occurred resulting in an invalid BIOS configuration. BIOS configuraiton is reset to detault settings.
Recommended Response Action: Go to the System Setup and configure the desired settings. Save and exit to apply the settings.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0070

Message: One or more correctable PCIe errors have occurred.
Detailed Description: One or more correctable PCIe errors have occurred. Data about the errors are logged into SEL during the POST operation.
Recommended Response Action: Check the System Event Log (SEL) to identify the PCIe device, and then update its firmware.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0071

Message: One or more UEFI network interfaces is not available. The corresponding UEFI network devices are disabled.
Detailed Description: One or more UEFI network interfaces is not available. The corresponding UEFI network devices are disabled.
Recommended Response Action: Connect the missing network interface card to the system and enable the UEFI network interface in System Setup.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0072

Message

Unable to load the firmware from arg1 because of the Secure Boot policy.

Arguments

arg1 = device name

Detailed Description

When the Secure Boot feature is enabled, the system BIOS authenticates each UEFI driver against the Secure Boot policy. If a UEFI driver does not meet the policy criteria, the system BIOS does not load or execute the UEFI driver and displays this message at the end of POST. The Secure Boot policy consists of authorized and unauthorized X.509 certificates; signed drivers must chain to an authorized certificate. The policy may also authorize hash values of individual UEFI driver images. Users can configure the Secure Boot feature and the Secure Boot policy in F2 System Setup > System BIOS > Security Settings page.

Recommended Response Action

If the Secure Boot feature is not desired, disable it in System Setup > System BIOS > Security Settings page. Otherwise, do the following: 1) Make sure the firmware on the failing device is up-to-date. 2) If subsequent failures occur, review the Secure Boot Policy Summary in System Setup > System BIOS > Security Settings page. The device firmware must be authorized by a public key or hash value in the Authorized Signature Database. The public key or hash value must not be present in the Forbidden Signature Database.

Category

Configuration

Subcategory

UEFI = UEFI Event

Severity

Severity 2 (Warning)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0073

Message

Unable to boot arg1 because of the Secure Boot policy.

Arguments

arg1 = Boot Option name

Detailed Description

When the Secure Boot feature is enabled, the system BIOS authenticates each boot option against the Secure Boot policy. If a boot option does not meet the policy criteria, the system BIOS does not boot to the boot option and displays this message. The Secure Boot policy consists of authorized and unauthorized X.509 certificates; signed boot images must chain to an authorized certificate. The policy may also authorize hash values of individual boot images. Users can configure the Secure Boot feature and the Secure Boot policy in System Setup > System BIOS > Security Settings page.

Recommended Response Action

If the Secure Boot feature is not desired, disable it in System Setup > System BIOS > Security Settings page. Otherwise, do the following: 1) review the Secure Boot Policy Summary in F2 System Setup > System BIOS > Security Settings page. The boot option must be authorized by a public key or hash value in the Authorized Signature Database. 2) If the boot option is not authorized but it can be trusted, enter System Setup > System BIOS > Security Settings page, set Secure Boot Policy to Custom, and add a entry for the boot option in the Authorized Signature Database (System Setup > System BIOS > Security Settings > Custom Policy Settings > Authorized Signature Database > Import Database Entry).

Category

Configuration

Subcategory

UEFI = UEFI Event

Severity

Severity 2 (Warning)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0074

Message: The Secure Boot policy has been modified since the last time the system was started.
Detailed Description: The system BIOS logs this message after detecting a change in Secure Boot policy settings. Such a change may result from user configuration or a system BIOS update. Changes to the following settings trigger this message: 1) Secure Boot (Enable/Disable) 2) Secure Boot Policy (Standard/Custom) 3) Platform Key 4) Key Exchange Keys 5) Authorized Signature Database (db) 6) Forbidden Signature Database (dbx).
Recommended Response Action: Review the Secure Boot policy settings in System Setup > System BIOS > Security Settings page. If policy changes were expected, no action is necessary. Otherwise, modify the Secure Boot policy settings as needed.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0075

Message: Network Daughter Card 1 is not detected.
Detailed Description: The Network Daughter Card 1 is not detected.
Recommended Response Action: Install a Network Daughter Card in the system.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0076

Message: One or more Corrected Machine Check(CMC) errors have occurred.
Detailed Description: A Corrected Machine Check error(s) has occured.
Recommended Response Action: Check the System Event Log (SEL) to identify the Corrected Machine Check (CMC) errors. Resolve the issue identified in the SEL that caused the CMC.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0077

Message: One or more PCIe device errors occurred in the previous boot.
Detailed Description: One or more PCIe device errors occured in the previous boot.
Recommended Response Action: Check the System Event Log (SEL) to identify the PCIe device with errors, and then update its firmware.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0078

Message: One or more Machine Check errors occurred in the previous boot.
Detailed Description: One or more Machine Check errors occurred in the previous boot.
Recommended Response Action: Check the System Event Log (SEL) to identifiy the source of the Machine Check error and resolve the issues.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0079

Message: One or more Uncorrectable Memory errors occurred in the previous boot.
Detailed Description: One or more Uncorrectable Memory errors occurred in the previous boot.
Recommended Response Action: Check the System Event Log (SEL) to identify the non-functional DIMM, and then replace the DIMM.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0080

Message

PCIe link speed is not optimal for arg1 . Expected link speed: Gen arg2 and actual link speed: Gen arg3 .

Arguments

arg1 = PCIe device
arg2 = generation number
arg3 = generation number

Detailed Description

The PCIe link speed is not optimal for the identified PCIe device.

Recommended Response Action

Do one of the following: 1) Turn off the input power to the system and turn on again. 2) Update the PCIe device firmware. If the issue persists, contact your service provider.

Category

System Health

Subcategory

UEFI = UEFI Event

Severity

Severity 2 (Warning)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0081

Message: Memory size has changed from the last time the system was started.
Detailed Description: Memory size has changed from the last time the system was started. No action is required if memory was added or removed.
Recommended Response Action: If the change is expected, no action is necessary. Otherwise, check the DIMM population inside the system and memory settings in System Setup for configuration changes. For more information, see the platform Owners Manual.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0082

Message: The system was reset due to a timeout from the watchdog timer.
Detailed Description: The system was reset due to a timeout from the watchdog timer.
Recommended Response Action: Check the System Event Log (SEL) or crash dumps from Operating System to identify the source that caused the watchdog timer reset. Update the firmware or driver for the identified device.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0083

Message: One or more PCI System errors (SERR) have occurred.
Detailed Description: One or more PCI System errors (SERR) have occurred.
Recommended Response Action: Check the System Event Log (SEL) to identify the PCI device that caused the SERR. Update the identifed device firmware. If the issue persists, contact your service provider.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0084

Message: One or more PCI Parity errors (PERR) have occurred.
Detailed Description: One or more PCI Parity errors (PERR) have occurred.
Recommended Response Action: Check the System Event Log (SEL) to identify the PCI device that caused the PERR. Update the identifed device firmware. If the issue persists, contact your service provider.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0085

Message: One or more chipset errors have occurred.
Detailed Description: One or more chipset errors have occurred.
Recommended Response Action: Check the System Event Log (SEL) to identify the chipset error. Do one of the following: 1) Turn off the input power to the system and turn on again. 2) Update the PCIe device firmware. If the issue persists, contact your service provider.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0086

Message

Unsupported Small Outline Dual In-line Memory Module (SODIMM) memory is installed on RDIMM memory slot: arg1 .

Arguments

arg1 = slot number

Detailed Description

Unsupported Small Outline Dual In-line Memory Module (SODIMM) memory is installed on the RDIMM memory slot indentified in the message.

Recommended Response Action

Remove the unsupported SODIMM module from the identified memory slot and replace it with a supported module. For more information, see the platform Owners Manual.

Category

Configuration

Subcategory

UEFI = UEFI Event

Severity

Severity 1 (Critical)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0087

Message

Unsupported 4Gb technology DIMM module is installed on memory slot: arg1 .

Arguments

arg1 = slot number

Detailed Description

Unsupported 4Gb technology DIMM module is installed on the memory slot indentified in the message.

Recommended Response Action

Remove the unsupported DIMM module from the identified memory slot and replace it with a supported module. For more information, see the platform Owners Manual.

Category

Configuration

Subcategory

UEFI = UEFI Event

Severity

Severity 1 (Critical)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0088

Message

Unsupported 8Gb technology DIMM module is installed on memory slot: arg1 .

Arguments

arg1 = slot number

Detailed Description

Unsupported 8Gb technology DIMM module is installed on the memory slot indentified in the message.

Recommended Response Action

Remove the unsupported DIMM module from the identified memory slot and replace it with a supported module. For more information, see the platform Owners Manual.

Category

Configuration

Subcategory

UEFI = UEFI Event

Severity

Severity 1 (Critical)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0089

Message

Incompatible x16 data bus width DIMM is installed on memory slot: arg1 .

Arguments

arg1 = slot number

Detailed Description

Incompatible x16 data bus width DIMM is installed on the memory slot indentified in the message.

Recommended Response Action

Remove the unsupported DIMM module from the identified memory slot and replace it with a supported module. For more information, see the platform Owners Manual.

Category

Configuration

Subcategory

UEFI = UEFI Event

Severity

Severity 1 (Critical)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0090

Message

A DIMM with an incompatible number of ranks is installed on memory slot: arg1 .

Arguments

arg1 = slot number

Detailed Description

A DIMM with an incompatible number of ranks is installed on the memory slot identified in the message.

Recommended Response Action

Remove the unsupported DIMM module from the identified memory slot and replace it with a supported module. For more information, see the platform Owners Manual.

Category

Configuration

Subcategory

UEFI = UEFI Event

Severity

Severity 1 (Critical)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0091

Message

A Quad-Rank (QR) DIMM is installed on memory slot: arg1 . QR DIMMs should be installed on the first DIMM slot in a channel if there is only one QR DIMM in the channel. QR DIMMs cannot be installed on the third slot of the channel.

Arguments

arg1 = slot number

Detailed Description

A Quad-Rank (QR) DIMM is installed on the memory slot indentified in the message. QR DIMMs should be installed on the first DIMM slot in a channel if there is only one QR DIMM in the channel. QR DIMMs cannot be installed on the third slot of the channel.

Recommended Response Action

Install the QR DIMM in the correct channel. For more information, see the platform Owners Manual.

Category

Configuration

Subcategory

UEFI = UEFI Event

Severity

Severity 1 (Critical)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0092

Message: The number of DIMM ranks has exceeded the maximum allowed ranks per channel limit.
Detailed Description: The number of DIMM ranks has exceeded the maximum allowed ranks per channel limit.
Recommended Response Action: Check the total number of ranks in each channel to make sure it does not exceed the maximum allowed limit. For more information, see the platform Owners Manual.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0093

Message

The DIMM installed on the memory slot: arg1 does not meet the minimum supported frequency.

Arguments

arg1 = slot number

Detailed Description

The DIMM installed on the memory slot identified in the message does not meet the minimum supported frequency.

Recommended Response Action

Remove all unsupported DIMM modules from the system. For more information, see the platform Owners Manual.

Category

Configuration

Subcategory

UEFI = UEFI Event

Severity

Severity 1 (Critical)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0094

Message

Unsupported Non-ECC memory module is installed on memory slot: arg1 .

Arguments

arg1 = slot number

Detailed Description

Unsupported Non-ECC memory module is installed on the memory slot identified in the message.

Recommended Response Action

Remove all Non-ECC DIMMs and replace them with ECC DIMMs. For more information, see the platform Owners Manual.

Category

Configuration

Subcategory

UEFI = UEFI Event

Severity

Severity 1 (Critical)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0095

Message

A DIMM with unsupported voltage is installed on memory slot arg1 .

Arguments

arg1 = Slot

Detailed Description

A DIMM with unsupported voltage is installed on the memory slot identified in the message.

Recommended Response Action

Remove the unsupported DIMM module and replace it with a DIMM with a supported voltage. For more information, see the platform Owners Manual.

Category

Configuration

Subcategory

UEFI = UEFI Event

Severity

Severity 1 (Critical)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0096

Message: Unable to enable the Advanced ECC memory operating mode because the current DIMM population or system configuration does not support Advanced ECC mode.
Detailed Description: The Advanced ECC memory operating mode cannot be enabled because the current DIMM population or system configuration does not support Advanced ECC mode.
Recommended Response Action: Check DIMM population and system configuration to make sure Advanced ECC memory operating mode can be supported. For more information, see the platform Owners Manual.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0097

Message: Unable to enable the Advanced ECC memory operating mode because of mismatches in the DIMM channel configurations.
Detailed Description: The Advanced ECC memory operating mode cannot be enabled because of mismatches in the DIMM channel configurations.
Recommended Response Action: Make sure identical memory modules in corresponding slots of channel pairs are populated. For more information, see the platform Owners Manual.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0098

Message

The memory Built-In Self-test (BIST) has detected one or more errors on the DIMM installed on memory slot: arg1 . As a result, the corresponding DIMM has been disabled.

Arguments

arg1 = slot number

Detailed Description

The memory Built-In Self-test (BIST) has detected one or more errors on the DIMM installed on memory slot: <slot number>. As a result, the corresponding DIMM has been disabled.

Recommended Response Action

Replace the DIMM module identified in the message. For more information, see the platform Owners Manual.

Category

System Health

Subcategory

UEFI = UEFI Event

Severity

Severity 1 (Critical)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0099

Message: Unable to enable the Memory Mirroring feature because the current DIMM population or hardware configuration does not support the feature.
Detailed Description: The Memory Mirroring feature cannot be enabled because the current DIMM population or hardware configuration does not support the feature.
Recommended Response Action: Check the DIMM population and hardware configuration to make sure the Memory Mirroring feature can be supported. For more information, see platform Owners Manual.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0100

Message: Unable to enable the Memory Mirroring feature because of mismatches in the DIMM channel configurations.
Detailed Description: The Memory Mirroring feature cannot be enabled because of mismatches in the DIMM channel configurations.
Recommended Response Action: Make sure identical memory modules in corresponding slots of channel pairs are populated. For more information, see the platform Owners Manual.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0101

Message: Total amount of installed memory has exceeded limit.
Detailed Description: The total amount of installed memory has exceeded the amount supported by the platform.
Recommended Response Action: Remove memory modules from the system to reduce the total amount of installed memory. For more information on installed memory limit, see the platform Owners Manual.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0102

Message: Unable to enable the Memory Sparing feature because the current DIMM population or hardware configuration does not support the feature.
Detailed Description: The Memory Sparing feature cannot be enabled because the current DIMM population or hardware configuration does not support the feature.
Recommended Response Action: Check the DIMM population and hardware configuration to make sure Memory Sparing feature can be supported. For more information, see the platform Owners Manual.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0103

Message

One or more memory initialization errors have occurred on memory slot: arg1 .

Arguments

arg1 = slot

Detailed Description

One or more memory initialization error have occurred on the memory slot identified in the message.

Recommended Response Action

Replace the faulty memory module identified in the message.

Category

System Health

Subcategory

UEFI = UEFI Event

Severity

Severity 2 (Warning)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0104

Message

The DIMM module on memory slot arg1 is populated out of order in the DIMM channel.

Arguments

arg1 = slot

Detailed Description

The DIMM module on memory slot identified in the message is populated out of order in the channel.

Recommended Response Action

Install DIMM modules in sequential order without skipping any slots in the channel. For more information, see the platform Owners Manual.

Category

Configuration

Subcategory

UEFI = UEFI Event

Severity

Severity 2 (Warning)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0105

Message: Unable to enable the Cluster on Die (COD) feature because of an unsupported memory configuration.
Detailed Description: The Cluster on Die (COD) feature cannot be enabled because of an unsupported memory configuration.
Recommended Response Action: Make sure to populate all memory channels in the system with a minimum of one DIMM per channel. For more information, see the platform Owners Manual.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0106

Message

One or more memory correctable training errors have occurred on memory slot: arg1

Arguments

arg1 = slot

Detailed Description

One or more memory correctable training errors have occurred on the memory slot identified in the message.

Recommended Response Action

Remove input power to the system, reseat the DIMM module and restart the system. If the correctable error persists, then replace the faulty memory module identified in the message.

Category

System Health

Subcategory

UEFI = UEFI Event

Severity

Severity 2 (Warning)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0107

Message

One or more memory errors have occurred on memory slot: arg1 .

Arguments

arg1 = slot

Detailed Description

One or more memory errors have occurred on the memory slot identified in the message. The error occurred during DQS initialization.

Recommended Response Action

Remove input power to the system, reseat the DIMM module and restart the system. If the issues persist, then replace the faulty memory module identified in the message.

Category

System Health

Subcategory

UEFI = UEFI Event

Severity

Severity 1 (Critical)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0108

Message

One or more memory errors have occurred on memory slot: arg1 .

Arguments

arg1 = slot

Detailed Description

One or more memory errors have occurred on memory slot identified in the message. The error occured during RecEn initialization.

Recommended Response Action

Remove input power to the system, reseat the DIMM module and restart the system. If the issues persist, then replace the faulty memory module identified in the message.

Category

System Health

Subcategory

UEFI = UEFI Event

Severity

Severity 1 (Critical)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0109

Message

One or more memory errors have occurred on memory slot: arg1 .

Arguments

arg1 = slot

Detailed Description

One or more memory errors have occurred on memory slot identified in the message. The error occurred during write leveling initialization.

Recommended Response Action

Remove input power to the system, reseat the DIMM module and restart the system. If the issues persist, then replace the faulty memory module identified in the message.

Category

System Health

Subcategory

UEFI = UEFI Event

Severity

Severity 1 (Critical)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0110

Message

One or more memory errors have occurred on memory slot: arg1 .

Arguments

arg1 = slot

Detailed Description

One or more memory errors have occurred on memory slot identified in the message. The error occurred during Write DqDqs training.

Recommended Response Action

Remove input power to the system, reseat the DIMM module and restart the system. If the issues persist, then replace the faulty memory module identified in the message.

Category

System Health

Subcategory

UEFI = UEFI Event

Severity

Severity 1 (Critical)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0111

Message

One or more memory errors have occurred on memory slot: arg1 .

Arguments

arg1 = slot

Detailed Description

One or more memory errors have occurred on memory slot identified in the message. The error occurred during memory test.

Recommended Response Action

Remove input power to the system, reseat the DIMM module and restart the system. If the issues persist, then replace the faulty memory module identified in the message.

Category

System Health

Subcategory

UEFI = UEFI Event

Severity

Severity 1 (Critical)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0112

Message

One or more memory errors have occurred on memory slot: arg1 .

Arguments

arg1 = slot

Detailed Description

One or more memory errors have occurred on memory slot identified in the message. The error occurred during the LRDIMM interface initialization.

Recommended Response Action

Remove input power to the system, reseat the DIMM module and restart the system. If the issues persist, then replace the faulty memory module identified in the message.

Category

System Health

Subcategory

UEFI = UEFI Event

Severity

Severity 1 (Critical)

LCD Message

No LCD message display defined.

Initial Default

LC Log

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0113

Message: Unable to enable the Fault Resilient Memory (FRM) feature because the current DIMM population or hardware configuration does not support the feature.
Detailed Description: The Fault Resilient Memory (FRM) feature cannot be enabled because the current DIMM population or hardware configuration does not support the feature.
Recommended Response Action: Check the DIMM population and hardware configuration to make sure the Memory Mirroring feature can be supported. For more information, see the platform Owners Manual.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0114

Message: Unable to enable the Fault Resilient Memory (FRM) operating mode because of mismatches in DIMM channel configurations.
Detailed Description: The Fault Resilient Memory (FRM) operating mode cannot be enabled because of mismatches in DIMM channel configurations.
Recommended Response Action: Make sure identical memory modules in corresponding slots of channel pairs are populated. For more information, see the platform Owners Manual.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0115

Message: The Management Engine firmware has recovered from one or more correctable errors.
Detailed Description: The BIOS has recovered the Management Engine after it became unresponsive via the HECI interface. There is no performance degradation and the Management Engine is functioning normally now.
Recommended Response Action: The Management Engine is functioning normally now. No response action is required.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 3 (Informational)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0116

Message: One or more boot drivers have reported issue(s).
Detailed Description: One or more boot drivers have reported issue(s) via the UEFI Driver Health Protocol.
Recommended Response Action: Check the Driver Health Menu in Boot Manager for details.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0117

Message: Card identification signature is not present on Internal Dual Secure Digital Module (IDSDM) SD card 1.
Detailed Description: Card identification signature is not present on Internal Dual Secure Digital Module (IDSDM) SD card 1.
Recommended Response Action: Do one of the following: 1) Check the IDSDM or the SD card media. 2) Try reseat or replace the SD card media. If the issue persists, contact your service provider.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0118

Message: Card identification signature is not present on Internal Dual Secure Digital Module (IDSDM) SD card 2.
Detailed Description: Card identification signature is not present on Internal Dual Secure Digital Module (IDSDM) SD card 2.
Recommended Response Action: Do one of the following: 1) Check the IDSDM or the SD card media. 2) Try reseat or replace the SD card media. If the issue persists, contact your service provider.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0119

Message: The Internal Dual Secure Digital Module (IDSDM) RAID redundancy was lost.
Detailed Description: Internal Dual Secure Digital Module (IDSDM) RAID redundancy was lost. The system BIOS should have prompted the user for the rebuild process.
Recommended Response Action: No additional response action is required if you have followed the instructions on the screen to start the rebuild process.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0120

Message: Both of the Internal Dual Secure Digital Module (IDSDM) SD card media are missing, or not responding.
Detailed Description: Both of the Internal Dual Secure Digital Module (IDSDM) SD card media are missing, or not responding.
Recommended Response Action: Make sure both the SD card media are properly installed and retry the system start up. If the issue persists, replace the SD card media.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0121

Message: The primary SD card is missing, not responding, or in write-protected mode.
Detailed Description: The primary SD card is missing, not responding, or in write-protected mode.
Recommended Response Action: Do one of the following: 1) Install a SD card media in the primary SD card reader. 2) Reseat or replace the SD card media. 3) If write-protected mode is expected, then no response action is required.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0122

Message: The secondary SD card is missing, not responding, or in write-protected mode.
Detailed Description: The secondary SD card is missing, not responding, or in write-protected mode.
Recommended Response Action: Do one of the following: 1) Install a SD card media in the secondary SD card reader. 2) Reseat or replace the SD card media. 3) If write-protected mode is expected, then no response action is required.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0123

Message: The secondary SD card has now become the primary SD card.
Detailed Description: The secondary SD card has now become the primary SD card.
Recommended Response Action: Check the screen display or the Lifecycle Log for prior messages. If the switch is expected, then no response action is required.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 3 (Informational)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0124

Message: The size and speed of the secondary SD card do not match those of the primary SD card.
Detailed Description: The size and speed of the primary SD card do not match those of the secondary SD card. The secondary SD card needs to have equal or greater capacity and speed than the primary SD card.
Recommended Response Action: Replace the secondary SD card with one that has equal or greater capacity and speed than the primary SD card.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0125

Message: Unable to finish The Internal Dual Secure Digital Module (IDSDM) image rebuild process because of issues.
Detailed Description: Unable to finish The Internal Dual Secure Digital Module (IDSDM) image rebuild process because of issues.
Recommended Response Action: Do one of the following: 1) Reseat or replace the SD card media. 2) Update the iDRAC firmware. Restart the system and retry the operation. If the issue persists, contact your service provider.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0126

Message: The primary SD card is in write-protected mode.
Detailed Description: The primary SD card is in write-protected mode.
Recommended Response Action: No response action is required if this is intentional.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 3 (Informational)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0127

Message: The secondary SD card is in write-protected mode.
Detailed Description: The secondary SD card is write-protected mode.
Recommended Response Action: No response action is required if this is intentional.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 3 (Informational)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0128

Message: Both the primary and secondary SD cards are in write-protected mode.
Detailed Description: Both the primary and secondary SD cards are in write-protected mode.
Recommended Response Action: No response action is required if this is intentional.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 3 (Informational)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0129

Message: The Internal Dual Secure Digital Module (IDSDM) has encountered an unknown issue.
Detailed Description: The Internal Dual Secure Digital Module (IDSDM) has encountered an unknown issue. This may be because new error codes are coming from the IDSDM firmware and the system BIOS or the iDRAC firwmare need to be updated to process correctly.
Recommended Response Action: Do one of the following: 1) Update the system BIOS. 2) Update the iDRAC firmware. 3) Reseat or replace the SD card media. Restart the system and retry the operation. If the issue persists, contact your service provider.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0130

Message: The system time and date are invalid.
Detailed Description: The system time and data are invalid.
Recommended Response Action: Go to the System Setup to set the current time and date.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0131

Message: Unable to load one or more option ROMs because of insufficient shadow memory.
Detailed Description: Unable to load one or more option ROMs because of insufficient shadow memory. The option ROM shadow memory is located between C0000h and F0000h.
Recommended Response Action: Do one of the following: 1) Remove unused PCIe card(s) to free up option ROM space. 2) Disable unused boot protocol instances (such as PXE, iSCSI, etc.) from applicable PCIe card(s) option ROM configurations. 3) If possible, install and run the Operating System in UEFI boot mode.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0132

Message: Unable to load one or more option ROMs because of insufficient base memory.
Detailed Description: Unable to load one or more option ROMs because of insufficient base memory. The base memory is memory below 640K.
Recommended Response Action: Do one of the following: 1) Remove unused PCIe card(s) to free up option ROM space. 2) Disable unused boot protocol instances (such as PXE, iSCSI, etc.) from applicable PCIe card(s) option ROM configurations. 3) If possible, install and run the Operating System in UEFI boot mode.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0133

Message: Unable to perform PXE boot because the VLAN settings conflict with that of the iSCSI device settings.
Detailed Description: Unable to perform PXE boot because the VLAN settings conflict with that of the iSCSI device settings.
Recommended Response Action: Do one of the following: 1) Go to System Setup and change the VLAN configuration for the PXE device to match that of the iSCSI device. Either both devices must be configured with VLAN enabled or both devices must be configured with VLAN disabled. 2) Change the PXE device interface setting to use a different NIC interface than the NIC interface used by the iSCSI device.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0134

Message: Unable to allocate Memory Mapped Input Output (MMIO) resources for one or more PCIe devices because of insufficient MMIO memory.
Detailed Description: Unable to allocate Memory Mapped Input Output (MMIO) resources for one or more PCIe devices because of insufficient MMIO memory.
Recommended Response Action: Do one of the following: 1) Remove unused PCIe card(s) to free up MMIO space. 2) Go to System Setup and enable the Memory Mapped I/O above 4GB option.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: LC Log;None
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0135

Message: Unable to execute CSIOR (Collect System Inventory on Restart) because the Lifecycle Controller (LC) firmware was not accessible.
Detailed Description: The CSIOR (Collect System Inventory on Restart) operation cannot be executed because the Lifecycle Controller (LC) firmware was not accessible. This issue is caused by LC partition attach issues.
Recommended Response Action: Do one of the following: 1) Restart the system and retry the operation. 2) Update the iDRAC firmware. If the issue persists, contact your service provider.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: None
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0136

Message: Unable to execute CSIOR (Collect System Inventory on Restart) because the Lifecycle Controller (LC) firmware was not accessible.
Detailed Description: The CSIOR (Collect System Inventory on Restart) operation cannot be executed because the Lifecycle Controller (LC) firmware was not accessible. This issue is caused by missing LC partitions.
Recommended Response Action: Do one of the following: 1) Restart the system and retry the operation. 2) Update the iDRAC firmware. If the issue persists, contact your service provider.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: None
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0137

Message: Unable to execute CSIOR (Collect System Inventory on Restart) because the Lifecycle Controller (LC) firmware was not accessible.
Detailed Description: The CSIOR (Collect System Inventory on Restart) operation cannot be executed because the Lifecycle Controller (LC) firmware was not accessible. This issue is caused by missing LC files.
Recommended Response Action: Do one of the following: 1) Restart the system and retry the operation. 2) Update the iDRAC firmware. If the issue persists, contact your service provider.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: None
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0138

Message: Unable to execute CSIOR (Collect System Inventory on Restart) because the Lifecycle Controller (LC) firmware was unable to complete a requested task or function.
Detailed Description: The CSIOR (Collect System Inventory on Restart) operation cannot be executed because the Lifecycle Controller (LC) firmware is unable to complete a requested task or function.
Recommended Response Action: Do one of the following: 1) Restart the system and retry the operation. 2) Update the iDRAC firmware. If the issue persists, contact your service provider.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: None
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0139

Message: Unable to enter System Service Mode (SSM) because the Lifecycle Controller (LC) firmware was not accessible.
Detailed Description: The System Service Mode (SSM) cannot be entered because the Lifecycle Controller (LC) firmware was not accessible. This situation is caused by LC partition attach issues.
Recommended Response Action: Do one of the following: 1) Restart the system and retry the operation. 2) Update the iDRAC firmware. If the issue persists, contact your service provider.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: None
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0140

Message: Unable to enter System Service Mode (SSM) because the Lifecycle Controller (LC) firmware was not accessible.
Detailed Description: The System Service Mode (SSM) cannot be entered because the Lifecycle Controller (LC) firmware was not accessible. This situation is caused by missing LC partitions.
Recommended Response Action: Do one of the following: 1) Restart the system and retry the operation. 2) Update the iDRAC firmware. If the issue persists, contact your service provider.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: None
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0141

Message: Unable to enter System Service Mode (SSM) because the Lifecycle Controller (LC) firmware was not accessible.
Detailed Description: The System Service Mode (SSM) cannot be entered because the Lifecycle Controller (LC) firmware was not accessible. This situation is caused by missing LC files.
Recommended Response Action: Do one of the following: 1) Restart the system and retry the operation. 2) Update the iDRAC firmware. If the issue persists, contact your service provider.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: None
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0142

Message: Unable to enter System Service Mode (SSM) because the Lifecycle Controller (LC) firmware was unable to complete a requested task or function.
Detailed Description: The System Service Mode (SSM) cannot be entered because the Lifecycle Controller (LC) firmware was unable to complete a requested task or function.
Recommended Response Action: Do one of the following: 1) Restart the system and retry the operation. 2) Update the iDRAC firmware. If the issue persists, contact your service provider.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: None
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0143

Message: Unsupported processor(s) are installed.
Detailed Description: Unsupported processor(s) are installed.
Recommended Response Action: Replace the processor(s) with supported ones. For more information about supported processors, contact your service provider.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: None
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0144

Message

One or more memory errors have occurred on memory slot: arg1 .

Arguments

arg1 = slot ID

Detailed Description

One or more memory errors have occurred on memory slot identified in the message. The error happens during the identification of memory module type or memory size.

Recommended Response Action

Remove input power to the system, reseat the DIMM module and restart the system. If the issues persist, replace the faulty memory module identified in the message.

Category

System Health

Subcategory

UEFI = UEFI Event

Severity

Severity 1 (Critical)

LCD Message

No LCD message display defined.

Initial Default

None

Server Administrator Event ID

Not Applicable

Server Administrator Trap ID

Not Applicable

UEFI0145

Message: The Trusted Platform Module (TPM) installed on this system is not supported.
Detailed Description: The Trusted Platform Module (TPM) installed on this system is not supported.
Recommended Response Action: Do one of the following: 1) Update the BIOS firmware. 2) Replace the TPM with a supported one. If the issue persists, contact your service provider.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: None
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0146

Message: Unable to verify the chassis type via iDRAC and CMC. System configuration may be incorrect as a result.
Detailed Description: Unable to verify the chassis type via iDRAC and CMC. System configuration may be incorrect as a result.
Recommended Response Action: Do one of the following: 1) Restart the system. 2) Update the iDRAC firmware and then restart the system. If the issue persists, contact your service provider.
Category: System Health
Subcategory: UEFI = UEFI Event
Severity: Severity 2 (Warning)
LCD Message: No LCD message display defined.
Initial Default: None
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

UEFI0147

Message: The system hardware or cabling configuration is invalid.
Detailed Description: The system hardware or cabling configuration is invalid.
Recommended Response Action: Do the following: 1) Make sure the system cables, risers, and CPU configuration are installed correctly. 2) Reseat each PCIe riser and reconnect the cables. For more information, see the system Owners Manual.
Category: Configuration
Subcategory: UEFI = UEFI Event
Severity: Severity 1 (Critical)
LCD Message: No LCD message display defined.
Initial Default: None
Server Administrator Event ID: Not Applicable
Server Administrator Trap ID: Not Applicable

Welcome

Welcome to Dell

Event and Error Message Reference Guide For 13th Generation Dell PowerEdge Servers Version 1.0

UEFI Event Messages

UEFI0000

UEFI0001

UEFI0002

UEFI0003

UEFI0004

UEFI0005

UEFI0006

UEFI0007

UEFI0008

UEFI0009

UEFI0010

UEFI0011

UEFI0012

UEFI0013

UEFI0014

UEFI0015

UEFI0016

UEFI0017

UEFI0018

UEFI0019

UEFI0022

UEFI0023

UEFI0024

UEFI0025

UEFI0026

UEFI0027

UEFI0028

UEFI0029

UEFI0030

UEFI0031

UEFI0032

UEFI0033

UEFI0034

UEFI0035

UEFI0036

UEFI0037

UEFI0038

UEFI0039

UEFI0040

UEFI0041

UEFI0042

UEFI0043

UEFI0044

UEFI0045

UEFI0046

UEFI0047

UEFI0048

UEFI0049

UEFI0050

UEFI0051

UEFI0052

UEFI0053

UEFI0054

UEFI0055

UEFI0056

UEFI0057

UEFI0058

UEFI0059

UEFI0060

UEFI0061

UEFI0062

UEFI0063

UEFI0064

UEFI0065

UEFI0066

UEFI0067

UEFI0068

UEFI0069

UEFI0070

UEFI0071

UEFI0072

UEFI0073

UEFI0074

UEFI0075

UEFI0076

UEFI0077