Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Event and Error Message Reference Guide For 13th Generation Dell PowerEdge Servers Version 1.0

PDF

HWC Event Messages

HWC0001

Message
Unable to complete the operation as there is no response from iDRAC.
Detailed Description
The error is caused due to iDRAC failure.
Recommended Response Action
1) Turn off the system and disconnect the power cord. 2) Wait for five seconds. 3) Reconnect the power cord and turn on the system.
Category
Configuration
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC0002

Message
Unable to detect vFlash SD card.
Detailed Description
The vFlash SD Card is either not present or not correctly inserted.
Recommended Response Action
Insert the vFlash SD card or reinsert the vFlash SD card, and retry the operation.
Category
Configuration
Subcategory
HWC = Hardware Config
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC0003

Message
Successfully initialized vFlash SD card.
Detailed Description
vFlash SD card was successfully initialized.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC0004

Message
Unable to initialize vFlash SD card.
Detailed Description
The vFlash SD card is incorrectly inserted, the vFlash SD card is faulty, or there is an iDRAC communication failure.
Recommended Response Action
Reinsert or replace the vFlash SD card, or reset iDRAC, and retry the operation. If the problem persists: 1) Turn off the system and disconnect the power cord. 2) Wait for five seconds. 3) Reconnect the power cord, turn on the system, and retry the operation.
Category
Configuration
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC0005

Message
Internal error while retrieving update information.
Detailed Description
Internal error while retrieving firmware version for the currently installed components. For more information about the failure, see Lifecycle Log.
Recommended Response Action
1) Turn off the system and disconnect the power cord. 2) Wait for five seconds. 3) Reconnect the power cord, turn on the system, and retry the operation.
Category
Configuration
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC0006

Message
Unable to save vFlash SD card settings.
Detailed Description
If a vFlash SD card is not present in the system or if the card is locked, Lifecycle Controller cannot save the settings.
Recommended Response Action
Insert the vFlash SD card or unlock the vFlash SD card and retry the operation.
Category
Configuration
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC0007

Message
Unable to load vFlash SD card settings.
Detailed Description
Lifecycle Controller is unable to retrieve vFlash SD card information from iDRAC.
Recommended Response Action
Reinsert the vFlash SD card and retry the operation. If the problem persists: 1) Turn off the system and disconnect the power cord. 2) Wait for five seconds. 3) Reconnect the power cord, turn on the system, and retry the operation.
Category
Configuration
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC0008

Message
Unable to communicate with iDRAC.
Detailed Description
An internal error occurred while communicating with iDRAC.
Recommended Response Action
Exit the wizard and retry the operation. If the problem persists: 1) Turn off the system and disconnect the power cord. 2) Wait for five seconds. 3) Reconnect the power cord, turn on the system, and retry the operation.
Category
Configuration
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC0009

Message
Unable to enable vFlash SD card.
Detailed Description
The vFlash SD card is missing or not inserted correctly. iDRAC is not able to enable vFlash SD card.
Recommended Response Action
Reinsert the vFlash SD card and retry the operation. If the problem persists: 1) Turn off the system and disconnect the power cord. 2) Wait for five seconds. 3) Reconnect the power cord, turn on the system, and retry the operation.
Category
Configuration
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC0010

Message
Invalid folder name or USB drive not found.
Detailed Description
Operation failed because the folder name entered is incorrect or the USB drive is disconnected.
Recommended Response Action
Enter a valid folder name or attach the USB drive and retry the operation.
Category
Configuration
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC0011

Message
Insufficient space to copy the file to the USB drive.
Detailed Description
The USB drive does not have sufficient free space to copy the file.
Recommended Response Action
Make sure the USB drive has sufficient free space before retrying the operation.
Category
Configuration
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC0012

Message
Unable to write to the USB drive.
Detailed Description
The USB drive is write protected.
Recommended Response Action
Remove write protection on the USB drive before retrying the operation.
Category
Configuration
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC0013

Message
Unable to copy the file to USB drive.
Detailed Description
The USB drive is disconnected or is not readable.
Recommended Response Action
Remove and reinsert the USB drive and retry the operation. If the problem persists, restart the system and retry.
Category
Configuration
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC0014

Message
Unable to detect vFlash SD card.
Detailed Description
The import operation failed because the vFlash SD card is missing or disabled.
Recommended Response Action
Make sure the vFlash SD card is inserted and enabled before retrying the operation.
Category
Configuration
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC0015

Message
iDRAC not responding.
Detailed Description
iDRAC has encountered a hardware error.
Recommended Response Action
Retry the operation. If the problem persists, 1) Turn off the system and disconnect the power cord. 2) Wait five seconds. 3) Reconnect the power cord, turn on the system, and retry the operation.
Category
Configuration
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC0016

Message
iDRAC communication failure.
Detailed Description
Lifecycle Controller is unable to communicate with iDRAC.
Recommended Response Action
Retry the operation. If the problem persists, 1) Turn off the system and disconnect the power cord. 2) Wait five seconds. 3) Reconnect the power cord, turn on the system, and retry the operation.
Category
Configuration
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC1000

Message
The arg1 is present.
Arguments
  • arg1 = name
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC1001

Message
The arg1 is absent.
Arguments
  • arg1 = name
Detailed Description
The absent device may be necessary for proper operation. System functionality may be degraded.
Recommended Response Action
Re-install or reconnect the hardware.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
The <name> is absent. Check hardware
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC1002

Message
The arg1 is disabled.
Arguments
  • arg1 = name
Detailed Description
None
Recommended Response Action
If device disabled unexpectedly, re-enable device.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC1003

Message
The arg1 is enabled.
Arguments
  • arg1 = name
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC1004

Message
The storage adapter is present.
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC1005

Message
The storage adapter is absent.
Detailed Description
The storage adapter may be necessary for proper operation. System functionality may be degraded.
Recommended Response Action
Install storage adapter.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
The storage adapter is absent. Check hardware
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC1006

Message
The storage adapter is disabled.
Detailed Description
None
Recommended Response Action
If adapter disabled unexpectedly, re-enable the storage adapter.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC1007

Message
The storage adapter is enabled.
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC1008

Message
The backplane is present.
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC1009

Message
The backplane is absent.
Detailed Description
The backplane may be necessary for proper operation. System functionality may be degraded.
Recommended Response Action
If removal was unintended, check presence, then re-install or reconnect.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
The backplane is absent. Check hardware
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC1010

Message
The backplane is disabled.
Detailed Description
None
Recommended Response Action
If disabled unexpectedly, re-enable backplane.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC1011

Message
The backplane is enabled.
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC1012

Message
The USB cable is present.
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC1013

Message
The USB cable is absent.
Detailed Description
The USB cable may be necessary for proper operation. System functionality may be degraded.
Recommended Response Action
If removal was unintended, check presence, then re-install or reconnect.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
The USB cable is absent. Check cable
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC1014

Message
The mezzanine card arg1 is present.
Arguments
  • arg1 = number
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC1015

Message
The mezzanine card arg1 is absent.
Arguments
  • arg1 = number
Detailed Description
The mezzanine card may be necessary for proper operation. System functionality may be degraded.
Recommended Response Action
If removal was unintended, check presence, then re-install or reconnect.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC1100

Message
The arg1 was installed in slot arg2 .
Arguments
  • arg1 = name
  • arg2 = number
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC1101

Message
The arg1 is removed from slot arg2 .
Arguments
  • arg1 = name
  • arg2 = number
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC1200

Message
The sled arg1 is inserted in slot arg2 .
Arguments
  • arg1 = sled name
  • arg2 = slot number
Detailed Description
The sled identified in the message is inserted in the slot identified in the message.
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC1201

Message
The sled arg1 is removed from slot arg2 .
Arguments
  • arg1 = sled name
  • arg2 = slot number
Detailed Description
The sled identified in the message is removed from the slot identified in the message.
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC2000

Message
The arg1 cable or interconnect is connected.
Arguments
  • arg1 = name
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC2001

Message
The arg1 cable or interconnect is not connected or is improperly connected.
Arguments
  • arg1 = name
Detailed Description
The cable may be necessary for proper operation. System functionality may be degraded.
Recommended Response Action
Check presence, then re-install or reconnect.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
The <name> cable or interconnect failure. Check connection
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC2002

Message
The storage arg1 cable or interconnect is connected.
Arguments
  • arg1 = name
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC2003

Message
The storage arg1 cable is not connected, or is improperly connected.
Arguments
  • arg1 = name
Detailed Description
The cable may be necessary for proper operation. System functionality may be degraded.
Recommended Response Action
Check presence, then re-install or reconnect.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
Storage <name> cable or interconnect failure. Check connection
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC2004

Message
The system board arg1 cable or interconnect is connected.
Arguments
  • arg1 = name
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC2005

Message
The system board arg1 cable or interconnect is not connected, or is improperly connected.
Arguments
  • arg1 = name
Detailed Description
The cable may be necessary for proper operation. System functionality may be degraded.
Recommended Response Action
Check presence, then re-install or reconnect.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
System board <name> cable or interconnect failure. Check connection
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC2006

Message
The arg1 is not installed correctly.
Arguments
  • arg1 = name
Detailed Description
The device may be necessary for proper operation. System functionality may be degraded.
Recommended Response Action
Check presence, then re-install or reconnect.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
<name> is not installed correctly. Check connection
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC2007

Message
The arg1 is installed correctly.
Arguments
  • arg1 = name
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC2008

Message
A fabric mismatch detected for mezzanine card arg1 .
Arguments
  • arg1 = number
Detailed Description
The fabric type for the IOM and mezzanine cards must match. Once an IOM or mezzanine card is inserted into the chassis, the fabric type is then set for the CMC and the CMC will ensure that all subsequent IOMs and mezzanine cards match.
Recommended Response Action
Check chassis fabric type in CMC GUI and compare to the type of IOM or mezzanine card.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC2009

Message
Mezzanine card arg1 is installed correctly.
Arguments
  • arg1 = number
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC2010

Message
The riser board cable or interconnect is connected.
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC2011

Message
The riser board cable or interconnect is not connected, or is improperly connected.
Detailed Description
The riser blade cable may be necessary for proper operation. System functionality may be degraded.
Recommended Response Action
Check presence, then re-install or reconnect.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
Riser board cable or interconnect failure. Check connection
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC2012

Message
A fabric mismatch detected on fabric arg1 with server in slot arg2 .
Arguments
  • arg1 = name
  • arg2 = number
Detailed Description
The fabric type on the server does not match that of the IO module.
Recommended Response Action
Check chassis fabric type in CMC GUI and compare to the type of IOM or mezzanine card.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC2013

Message
Fabric mismatch corrected on fabric arg1 with server in slot arg2 .
Arguments
  • arg1 = name
  • arg2 = number
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC2014

Message
A hardware misconfiguration detected on arg1 .
Arguments
  • arg1 = name
Detailed Description
None.
Recommended Response Action
Make sure the hardware is installed correctly. Refer to the product documentation for correct configuration and installation procedures.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
A hardware misconfiguration detected on <name>. Check hardware
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC2015

Message
The arg1 is configured correctly.
Arguments
  • arg1 = name
Detailed Description
None.
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC3000

Message
The arg1 is removed.
Arguments
  • arg1 = name
Detailed Description
The removed device may be necessary for proper operation. System functionality may be degraded.
Recommended Response Action
If removal was unintended, check presence, then re-install or reconnect
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC3001

Message
The arg1 is inserted.
Arguments
  • arg1 = name
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC3002

Message
Server arg1 is removed.
Arguments
  • arg1 = number
Detailed Description
None
Recommended Response Action
If removal was unintended, check presence, then re-insert
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC3003

Message
Server arg1 was inserted.
Arguments
  • arg1 = number
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC3004

Message
IO module arg1 is removed.
Arguments
  • arg1 = number
Detailed Description
None
Recommended Response Action
If removal was unintended, check presence, then re-insert
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC3005

Message
IO module arg1 was inserted.
Arguments
  • arg1 = number
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC3006

Message
Unable to QuickDeploy server in slot arg1 .
Arguments
  • arg1 = slot number
Detailed Description
There are not enough IPv4 addresses reserved for the servers in this chassis. Therefore the newly inserted server could not be configured with the QuickDeploy feature.
Recommended Response Action
Do the following: 1) Check the number of reserved IPv4 addresses for QuickDeploy. 2) Modify it such that the newly inserted blade will obtain an IP address for QuickDeploy. 3) Reseat the server to see the QuickDeploy prompt on LCD panel or manually configure the network parameters for the server.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC4000

Message
A hardware incompatibility detected between BMC/iDRAC firmware and CPU.
Detailed Description
A hardware incompatibility was detected between BMC/iDRAC firmware and Processor(s). An iDRAC or BMC firmware update is needed.
Recommended Response Action
Update the BMC/iDRAC firmware. If the problem persists, contact support.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
Incompatibility between BMC/iDRAC firmware and CPU. Update firmware
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC4001

Message
A hardware incompatibility was corrected between BMC/iDRAC firmware and CPU.
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC4002

Message
A hardware incompatibility detected between BMC/iDRAC firmware and other hardware.
Detailed Description
A hardware incompatibility was detected between BMC/iDRAC firmware and other hardware. An iDRAC or BMC firmware update is needed.
Recommended Response Action
Update the BMC/iDRAC firmware. If the problem persists, contact support.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC4003

Message
A hardware incompatibility was corrected between BMC/iDRAC firmware and other hardware.
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC4010

Message
Hardware successfully updated for mezzanine card arg1 .
Arguments
  • arg1 = number
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC4011

Message
Hardware unsuccessfully updated for mezzanine card arg1 .
Arguments
  • arg1 = number
Detailed Description
None
Recommended Response Action
Check presence, re-install or reconnect, then re-attempt the update. If the problem persists, contact support.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC4012

Message
Hardware successfully updated for embedded NIC.
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC4013

Message
Hardware unsuccessfully updated for embedded NIC.
Detailed Description
None
Recommended Response Action
Check presence, re-install or reconnect, then re-attempt the update. If the problem persists, contact support.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC4014

Message
Link Tuning data successfully updated.
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC4015

Message
Link Tuning error detected.
Detailed Description
CMC has old firmware and does not recognize the new device which has requested link tuning information. After updating the firmware the CMC will recognize the device.
Recommended Response Action
Update the CMC firmware. If the problem persists, contact support.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC4016

Message
Hardware incompatibility detected with mezzanine card arg1 .
Arguments
  • arg1 = number
Detailed Description
The system has detected a mezzanine card that is not supported on this system.
Recommended Response Action
1) Review system documentation for supported mezzanine cards. 2) Replace mezzanine card with a supported mezzanine card.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC4017

Message
A hardware incompatibility is detected between arg1 arg2 and arg3 arg4 .
Arguments
  • arg1 = first component name
  • arg2 = first component location
  • arg3 = second component name
  • arg4 = second component location
Detailed Description
The system has detected an unsupported hardware component. A hardware incompatibility is detected between the components identifed in the message.
Recommended Response Action
Do the following: 1) Review system documentation for the hardware components identified in the message. 2) Replace unsupported components with supported components.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC4018

Message
A hardware incompatibility was corrected between arg1 arg2 and arg3 arg4 .
Arguments
  • arg1 = first component name
  • arg2 = first component location location
  • arg3 = second component name
  • arg4 = second component location
Detailed Description
A hardware incompatibility was corrected between the components identified in the message.
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC5000

Message
arg1 is online.
Arguments
  • arg1 = name
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC5001

Message
arg1 is offline.
Arguments
  • arg1 = name
Detailed Description
None
Recommended Response Action
If unexpected, check presence, then re-install or reconnect.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 2 (Warning)
Trap/EventID
2330
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC5002

Message
A fabric mismatch detected on arg1 .
Arguments
  • arg1 = name
Detailed Description
The fabric type for the IOM and mezzanine cards must match. Once an IOM or mezzanine card is inserted into the chassis, the fabric type is then set for the CMC and the CMC will ensure that all subsequent IOMs and mezzanine cards match.
Recommended Response Action
Check chassis fabric type in CMC GUI and compare to the type of IOM or mezzanine card.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 2 (Warning)
Trap/EventID
2330
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC5003

Message
arg1 is operating correctly.
Arguments
  • arg1 = name
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC5004

Message
A link tuning failure detected on arg1 .
Arguments
  • arg1 = name
Detailed Description
CMC has old firmware and does not recognize the new device which has requested link tuning information. After updating the firmware the CMC will recognize the device.
Recommended Response Action
Update the CMC firmware. If the problem persists, contact support.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 2 (Warning)
Trap/EventID
2330
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC5006

Message
A failure is detected on arg1 .
Arguments
  • arg1 = name
Detailed Description
None
Recommended Response Action
Contact technical support. Refer to your product documentation to choose the contact method that is convenient for you.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC5008

Message
Console is not available for the arg1 .
Arguments
  • arg1 = name
Detailed Description
None
Recommended Response Action
Contact technical support. Refer to your product documentation to choose the contact method that is convenient for you.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC5010

Message
arg1 cannot detect any hosts.
Arguments
  • arg1 = name
Detailed Description
None
Recommended Response Action
Contact technical support. Refer to your product documentation to choose the contact method that is convenient for you.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC5012

Message
On screen display (OSCAR) is not functional for the arg1 .
Arguments
  • arg1 = name
Detailed Description
None
Recommended Response Action
Contact technical support. Refer to your product documentation to choose the contact method that is convenient for you.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC5014

Message
arg1 is not functional and is powered off.
Arguments
  • arg1 = name
Detailed Description
None
Recommended Response Action
Contact technical support. Refer to your product documentation to choose the contact method that is convenient for you.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC5030

Message
IO module arg1 is online.
Arguments
  • arg1 = number
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC5031

Message
IO module arg1 is offline.
Arguments
  • arg1 = number
Detailed Description
The CMC has powered off the IOM.
Recommended Response Action
Contact technical support. Refer to your product documentation to choose the contact method that is convenient for you.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 2 (Warning)
Trap/EventID
2330
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC5032

Message
A fabric mismatch detected on IO module arg1 .
Arguments
  • arg1 = number
Detailed Description
The fabric type for IOMs on the same chassis fabric must match.
Recommended Response Action
Check chassis fabric type in CMC GUI and compare to the type of both IOMs.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 2 (Warning)
Trap/EventID
2330
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC5033

Message
IO module arg1 is operating correctly.
Arguments
  • arg1 = number
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC5034

Message
A link tuning failure detected on IO module arg1 .
Arguments
  • arg1 = number
Detailed Description
Link tuning table not supported for this IO modular.
Recommended Response Action
Update the CMC firmware. If the problem persists, contact support.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 2 (Warning)
Trap/EventID
2330
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC5035

Message
An over-temperature event detected on I/O module arg1 .
Arguments
  • arg1 = number
Detailed Description
The I/O module over heated.
Recommended Response Action
Do the following: 1) Make sure fans are installed and working correctly. 2) Check the temperature sensor status for the chassis and make sure it is within the chassis operating temperature range. 3) Reseat the I/O module to clear the over-temperature condition. If the problem persists, contact the service provider.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC5036

Message
A failure is detected on IO module arg1 .
Arguments
  • arg1 = number
Detailed Description
The IOM module performance may be impact.
Recommended Response Action
Contact technical support. Refer to your product documentation to choose the contact method that is convenient for you.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC5037

Message
I/O module arg1 failed to boot.
Arguments
  • arg1 = number
Detailed Description
The firmware on the I/O module did not boot. The problem may be because the I/O module is not inserted correctly.
Recommended Response Action
Reseat I/O module. If problem persists, contact the service provider.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC6000

Message
The arg1 controller is offline.
Arguments
  • arg1 = name
Detailed Description
Information and status from the controller is unavailable.
Recommended Response Action
Remove and reapply input power. If problem persists, contact technical support. Refer to the product documentation to choose a convenient contact method.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 2 (Warning)
Trap/EventID
2330
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC6001

Message
The arg1 controller is online.
Arguments
  • arg1 = name
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC6002

Message
The arg1 controller is stuck in boot mode.
Arguments
  • arg1 = name
Detailed Description
Information and status from the controller is unavailable.
Recommended Response Action
Remove and reapply input power. If problem persists, contact technical support. Refer to the product documentation to choose a convenient contact method.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC6003

Message
The arg1 controller is booting.
Arguments
  • arg1 = name
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC6004

Message
Cannot communicate with arg1 controller.
Arguments
  • arg1 = name
Detailed Description
Information and status from the controller is unavailable.
Recommended Response Action
Remove and reapply input power. If problem persists, contact technical support. Refer to the product documentation to choose a convenient contact method.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC6005

Message
Communications restored for arg1 controller.
Arguments
  • arg1 = name
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC7000

Message
Server arg1 health changed to a normal state.
Arguments
  • arg1 = number
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC7002

Message
Server arg1 health changed to a warning state from a normal state.
Arguments
  • arg1 = number
Detailed Description
Server health changed to a warning state from a normal state.
Recommended Response Action
Review System Log or front panel for additional information.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 2 (Warning)
Trap/EventID
2330
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC7004

Message
Server arg1 health changed to a critical state from either a normal or warning state.
Arguments
  • arg1 = number
Detailed Description
Server <number> health changed to a critical state from either a normal or warning state.
Recommended Response Action
Review System Log or front panel for additional information.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC7006

Message
Server arg1 health changed to a non-recoverable state from a less severe state.
Arguments
  • arg1 = number
Detailed Description
Server <number> health changed to a non-recoverable state from a less severe state.
Recommended Response Action
Review System Log or front panel for additional information.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC7008

Message
Server arg1 health changed to a warning state from more severe state.
Arguments
  • arg1 = number
Detailed Description
Server <number> health changed to a warning state from more severe state.
Recommended Response Action
Review System Log or front panel for additional information.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 2 (Warning)
Trap/EventID
2330
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC7010

Message
Server arg1 health changed to a critical state from a non-recoverable state.
Arguments
  • arg1 = number
Detailed Description
Server <number> health changed to a critical state from a non-recoverable state.
Recommended Response Action
Review System Log or front panel for additional information.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC7012

Message
Server arg1 health changed to a non-recoverable state.
Arguments
  • arg1 = number
Detailed Description
Server <number> health changed to a non-recoverable state.
Recommended Response Action
Review System Log or front panel for additional information.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

HWC8000

Message
Unknown device plug event occurred at this location: arg1 . Additional Details: arg2 .
Arguments
  • arg1 = device location
  • arg2 = details
Detailed Description
An unknown device plug event occurred at the identified device location. Along with the device location, additional event details are provided if available.
Recommended Response Action
No response action is required.
Category
Audit
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
OS Log;None
Server Administrator Event ID
5650
Server Administrator Trap ID
Not Applicable

HWC8001

Message
A device was added to the system at this location: arg1 . Additional Details: arg2 .
Arguments
  • arg1 = device location
  • arg2 = details
Detailed Description
A device was added to the system at the location identified in the message. Along with the device location, additional event details are provided if available.
Recommended Response Action
No response action is required.
Category
Audit
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
SNMP Alert;OS Log;None
Server Administrator Event ID
5651
Server Administrator Trap ID
5651

HWC8002

Message
The device was removed from the system at this location: arg1 . Additional Details: arg2 .
Arguments
  • arg1 = device location
  • arg2 = details
Detailed Description
A device was was removed from the system at the location identified in the message. Along with the device location, additional event details are provided if available.
Recommended Response Action
No response action is required.
Category
Audit
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
SNMP Alert;OS Log;None
Server Administrator Event ID
5652
Server Administrator Trap ID
5652

HWC8003

Message
A configuration error was detected in the device located here: arg1 . Additional Details: arg2 .
Arguments
  • arg1 = device location
  • arg2 = details
Detailed Description
A configuration error was detected for a pluggable device installed at the location identified in the message. The device may not be installed correctly.
Recommended Response Action
Reinsert the device or try inserting a different device of the same type and retry the operation. If the issue persists, check the system documentation to make sure the device is supported or contact your service provider.
Category
Audit
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
SNMP Alert;OS Log;None
Server Administrator Event ID
5653
Server Administrator Trap ID
5653

HWC8004

Message
The SD card device sensor has failed. SD card location: arg1 , SD card device type: arg2 , SD card state: arg3 .
Arguments
  • arg1 = location
  • arg2 = type
  • arg3 = state
Detailed Description
The SD card device sensor of the type identified in the messaage has failed. The current status of the SD card is also displayed.
Recommended Response Action
Reinsert the SD card or try a different SD card and retry the operation. If the issue persists, do one of the following to resolve the error: 1) If the SD card sensor is installed on the internal SD module, replace the module. 2) If the SD card sensor is embedded on the system board, replace the system board. . For more information, contact your service provider.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
OS Log;None
Server Administrator Event ID
5750
Server Administrator Trap ID
Not Applicable

HWC8005

Message
The SD card device has returned to normal state. SD card location: arg1 , SD card device type: arg2 , SD card state: arg3 .
Arguments
  • arg1 = location
  • arg2 = type
  • arg3 = state
Detailed Description
The SD card device has returned to a normal state. The SD card type and the current status of the SD card is also displayed.
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
OS Log;None
Server Administrator Event ID
5752
Server Administrator Trap ID
Not Applicable

HWC8006

Message
The SD card device state has changed to a warning state. SD card location: arg1 , SD card device type: arg2 , SD card state: arg3 .
Arguments
  • arg1 = location
  • arg2 = type
  • arg3 = state
Detailed Description
The SD card device is not functioning correctly, and its state has changed to a warning state.
Recommended Response Action
Reinsert the SD card or try a different SD card and retry the operation. If the issue persists, do one of the following to resolve the error: 1) If the SD card sensor is installed on the internal SD module, replace the module. 2) If the SD card sensor is embedded on the system board, replace the system board. . For more information, contact your service provider.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
SNMP Alert;OS Log;None
Server Administrator Event ID
5753
Server Administrator Trap ID
5753

HWC8007

Message
The SD card has failed. SD card location: arg1 , SD card device type: arg2 , SD card state: arg3 .
Arguments
  • arg1 = location
  • arg2 = type
  • arg3 = state
Detailed Description
The SD card sensor detected an SD card failure.
Recommended Response Action
Replace the old SD card with a new SD card.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
SNMP Alert;OS Log;None
Server Administrator Event ID
5754
Server Administrator Trap ID
5754

HWC8008

Message
The SD card has failed. SD card location: arg1 , SD card device type: arg2 , SD card state: arg3 .
Arguments
  • arg1 = location
  • arg2 = type
  • arg3 = state
Detailed Description
An SD card device sensor has detected an irrecoverable error in the SD card.
Recommended Response Action
Replace the old SD card with a new SD card.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
OS Log;None
Server Administrator Event ID
5755
Server Administrator Trap ID
Not Applicable

HWC8009

Message
SD card device sensor value unknown. SD card location: arg1 , SD card device type: arg2 , SD card state: arg3 .
Arguments
  • arg1 = location
  • arg2 = type
  • arg3 = state
Detailed Description
An SD card device sensor in the identified system could not obtain a reading.
Recommended Response Action
Remove and reinsert the identified SD card.
Category
System Health
Subcategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
OS Log;None
Server Administrator Event ID
5751
Server Administrator Trap ID
Not Applicable

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\