Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Event and Error Message Reference Guide For 13th Generation Dell PowerEdge Servers Version 1.0

PDF

SYS Event Messages

SYS001

Message
The operation was successful.
Detailed Description
The operation requested successfully completed.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS002

Message
Unable to perform the operation due to an unknown error in iDRAC.
Detailed Description
The operation did not complete successfully because of an unknown error in iDRAC.
Recommended Response Action
Retry the action. If the issue persists, reset iDRAC.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS003

Message
Missing parameters: arg1 .
Arguments
  • arg1 = parameter names
Detailed Description
One or more required parameters needed for the operation are missing.
Recommended Response Action
Refer to the Lifecycle Controller Remote Services documentation and retry the operation with the required parameters.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS004

Message
Invalid parameter value for arg1 .
Arguments
  • arg1 = parameter name
Detailed Description
The value provided for the specified parameter is invalid.
Recommended Response Action
Refer to the Lifecycle Controller Remote Services documentation and retry the operation with a valid value for the identified parameter.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS005

Message
AttributeName array and AttributeValue array element count mismatch.
Detailed Description
The AttributeName input array and AttributeValue input array do not have the same number of elements.
Recommended Response Action
Verify AttributeName and AttributeValue pairs match and are valid. Refer to the Lifecycle Controller Remote Services documentation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS006

Message
Unable to set read only attribute: arg1
Arguments
  • arg1 = attribute name
Detailed Description
The attribute being set is currently read-only and cannot be changed.
Recommended Response Action
Refer to the Lifecycle Controller Remote Services documentation for the specific attribute behavior.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS007

Message
Input out of range for arg1 .
Arguments
  • arg1 = attribute name
Detailed Description
The input value for the attribute being set is not within the acceptable range for the attribute.
Recommended Response Action
Refer to the Lifecycle Controller-Remote Services documentation for the specific attribute and retry the operation with valid value within the range of the attribute.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS008

Message
Invalid boolean in value for attribute: arg1 .
Arguments
  • arg1 = attribute name
Detailed Description
The input value for the specified attribute is not a valid boolean value for the attribute.
Recommended Response Action
Refer to the Lifecycle Controller-Remote Services documentation and provide a valid boolean value for the specified attribute.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS009

Message
String exceeds maximum length for attribute: arg1
Arguments
  • arg1 = attribute name
Detailed Description
Length of string for specified attribute exceeded the maximum length allowed.
Recommended Response Action
Check Lifecycle Controller-Remote Services documentation and retry the command with string value length less than maximum length allowed.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS010

Message
Invalid character in value for attribute: arg1
Arguments
  • arg1 = attribute name
Detailed Description
The input value for the specified attribute is not valid.
Recommended Response Action
Refer to Lifecycle Controller-Remote Services documentation and provide valid attribute value for the specified attribute.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS011

Message
Pending configuration values are already committed, unable to perform another set operation.
Detailed Description
A configuration job is scheduled to apply pending set attribute operations. Set operations are not allowed if there is an existing configuration job for a component.
Recommended Response Action
Wait for the scheduled job to complete or delete the configuration jobs before attempting more set attribute operations.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS012

Message
User privileges are not sufficient to perform operation.
Detailed Description
The user credentials provided do not have appropriate privileges to perform the operation requested.
Recommended Response Action
Retry operation using user credentials that have appropriate privileges to perform the operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS013

Message
Invalid attribute name: arg1 .
Arguments
  • arg1 = attribute name
Detailed Description
The attribute name provided for the requested operation does not exist on the target system or is invalid.
Recommended Response Action
For more information, see Lifecycle Controller-Remote Services documentation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS014

Message
Invalid value for attribute: arg1
Arguments
  • arg1 = attribute name
Detailed Description
The value provided for the identified attribute is invalid.
Recommended Response Action
For more information, refer to the Lifecycle Controller-Remote Services documentation and provide a valid value for the identified attribute.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS015

Message
Job created successfully.
Detailed Description
The requested job has been created.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS016

Message
Job completed with errors
Detailed Description
All the operations in the Job were attempted, but some did not complete successfully.
Recommended Response Action
Review the Job content and verify the values are correct. For more information, see Lifecycle Controller Remote Services documentation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS017

Message
Job did not complete successfully.
Detailed Description
The job did not complete successfully.
Recommended Response Action
Verify the reason for the unsuccessful completion of the job by inspecting the Lifecycle Log entries related to the job. Correct the underlying cause of the unsuccessful completion and retry the operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS018

Message
Job completed successfully.
Detailed Description
The submitted job completed successfully.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS019

Message
Required dependency input not found.
Detailed Description
The input is missing a required dependency necessary for the operation.
Recommended Response Action
Provide the required dependency and retry. For more information, see Lifecycle Controller Remote Services documentation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS020

Message
Invalid required Attribute value.
Detailed Description
The value provided for the required attribute is invalid.
Recommended Response Action
The value specified is not valid. Refer to the Lifecycle Controller Remote Services documentation for more information.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS021

Message
Unable to set the value for arg1
Arguments
  • arg1 = attribute name
Detailed Description
The operation did not complete successfully because of incorrect parameters or internal firmware issues.
Recommended Response Action
Retry the operation. If the issue persists, do one of the following: 1) verify the value being set is correct, 2) reset the iDRAC.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS022

Message
Resource allocation failure.
Detailed Description
The operation could not complete because of an internal resource allocation issue with the firmware.
Recommended Response Action
Reset the iDRAC and retry the operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS023

Message
No configuration changes pending.
Detailed Description
There are no pending values to change.
Recommended Response Action
Ensure there are pending values for the attributes that need to be set and retry the operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS024

Message
Attribute dependency checking did not complete successfully.
Detailed Description
The provided attribute dependency value is not valid.
Recommended Response Action
For more information on the attribute dependency, see Lifecycle Controller Remote Services documentation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS025

Message
Unable to delete pending configuration.
Detailed Description
There are no pending configurations to be deleted.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS029

Message
Unsupported parameter name arg1 .
Arguments
  • arg1 = parameter name
Detailed Description
The parameter name is not supported.
Recommended Response Action
Remove the unsupported parameter and retry the operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS030

Message
Collecting component configuration information.
Detailed Description
Collecting the data required for component configuration.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS031

Message
Updating component configuration.
Detailed Description
The configuration is being applied to a component.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS032

Message
Staged component configuration is complete.
Detailed Description
The staged component configuration update performed in the UEFI environment on the host system is complete.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS033

Message
Staged component configuration completed with errors.
Detailed Description
The staged component configuration update performed in the UEFI environment on the host system has completed, but there were errors.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS034

Message
Performing component configuration for: arg1
Arguments
  • arg1 = device name
Detailed Description
The configuration operation for the specified device is in progress.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS035

Message
Some configuration values were not applied to: arg1
Arguments
  • arg1 = device name
Detailed Description
The component configuration operation was completed, however some of the configuration values were not successfully applied.
Recommended Response Action
Retrieve and view configuration operation results in the Lifecycle Log. For more information to retrieve the configuration results see the Lifecycle Controller Remote Services Users Guide. Identify the unsuccessful configuration operations. Modify the input data as appropriate for the component and retry the configuration operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS036

Message
Unable to apply the configuration to the component.
Detailed Description
The configuration settings could not be applied to the component. This may indicate configuration changes since the last system inventory collection was completed.
Recommended Response Action
Retry the operation or try the attribute set operation for the component.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS037

Message
Component update initialization failure.
Detailed Description
Operation validation is unsuccessful. The command, target and operation data are all validated before an update is performed. If any of them are missing or incorrect the operation does not complete successfully.
Recommended Response Action
Enable the Collect System Inventory on Restart attribute using Lifecycle Controller and restart the system. Retry the operation after the system restarts.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS038

Message
Missing or corrupt configuration information.
Detailed Description
Unable to locate the configuration data associated with the job.
Recommended Response Action
Retry the operation. If this issue persists, contact your service provider.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS039

Message
Verification of requested configuration changes failed.
Detailed Description
The requested configuration changes have not passed the component specific verification checks, and therefore the changes will not be applied.
Recommended Response Action
Check the scripts or related documentation and retry the operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS040

Message
The firmware update operation did not complete successfully.
Detailed Description
An operation to update the frmware of a component did not complete successfully.
Recommended Response Action
Check the Lifecycle Log for more details about the unsuccessful operation. Resolve the issue and retry the operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS041

Message
Unable to apply some component configuration values.
Detailed Description
The configuration update is complete, however all of the values were not correctly applied.
Recommended Response Action
Check the Lifecycle Log for the values that were not set. Resolve the issues in the XML configuration input file and retry the operation. Alternatively, configure each of the attributes using the component service methods. For more information, see the Lifecycle Controller Users Guide.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS042

Message
Component configuration successfully completed.
Detailed Description
The requested component configuration successfully completed.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS043

Message
Successfully exported system configuration XML file.
Detailed Description
The current configuration of the system components (BIOS, RAID, NIC, iDRAC, and so on) was written to a system configuration XML file and successfully copied to the specified location.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS044

Message
Unable to export one or more component configurations.
Detailed Description
Unable to collect the configuration information for one or more components. An internal error occurred while processing component information.
Recommended Response Action
Enable Collect System Inventory On Restart (CSIOR) using Lifecycle Controller and restart the system. Make sure that inventory collection is complete before retrying the operation. For more information, see the Lifecycle Controller Users Guide.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS045

Message
Unable to copy the system configuration XML file to the network share.
Detailed Description
An error occurred while copying the system configuration XML file to the network share.
Recommended Response Action
If the file is being exported to an NFS share, make sure that it is accessible from iDRAC. If the file is being exported to a CIFS share, make sure that it is accessible from iDRAC using share access credentials with the appropriate privileges.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS046

Message
Unable to import the system configuration XML file from the network share.
Detailed Description
An error occurred while copying the system configuration XML file from the network share.
Recommended Response Action
If the file is being copied from an NFS share, make sure that it is accessible from iDRAC. If the file is being copied from a CIFS share, make sure that it is accessible from iDRAC using the share credentials provided. Test the network share access using the Test Network Connection method. For more information, see the Lifecycle Controller Users Guide.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS047

Message
Input file for system configuration XML is not compliant with configuration schema.
Detailed Description
The input file is not compliant with the system configuration XML schema.
Recommended Response Action
Make sure that the input file is compliant with the system configuration schema published on delltechcenter.com/lc in the LC XML Schema Guide.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS048

Message
System configuration XML input file contains invalid characters, arg1 at line arg2 .
Arguments
  • arg1 = character
  • arg2 = line
Detailed Description
The operation expected a valid XML that is compliant with the system configuration schema. However, the system configuration file does not contain valid XML content.
Recommended Response Action
View the file in any Web browser to check for invalid characters. Remove the invalid characters and make sure that the file is a valid XML and is compliant with the system configuration schema published on delltechcenter.com/lc in the LC XML Schema Guide.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS050

Message
The system configuration XML file for import configuration is not compliant with schema nesting checks.
Detailed Description
The system configuration XML file for the import configuration operation is not compliant with schema nesting checks. Only RAID controllers can have nested Component nodes up to a maximum nesting depth of three.
Recommended Response Action
Make sure that the system configuration XML file is compliant with the system configuration schema published on delltechcenter.com/lc in the LC XML Schema Guide. Only RAID controllers can have nested Component nodes.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS051

Message
The system could not be shut down within the specified time.
Detailed Description
Sometimes, the operating system on the server may not allow a graceful shutdown or may not complete within the specified graceful shutdown timeout. This error indicates that the system could not be shutdown within the time specified. The default timeout value is 5 minutes and the maximum value allowed is 1 hour.
Recommended Response Action
Retry the operation with a longer specified graceful shutdown timeout or with the system shutdown option.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS052

Message
Analyzing iDRAC, System, or Lifecycle Controller configuration for changes to be applied.
Detailed Description
Configuration changes that do not require a system restart are currently being applied.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS053

Message
Successfully imported and applied system configuration XML file.
Detailed Description
Configuration changes specified in the system configuration XML file were successfully applied.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS054

Message
No configuration changes requiring a system restart need to be applied.
Detailed Description
The current configuration for components that require staged configuration already match the configuration specified by the input file. A system restart to apply staged configuration is not required.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS055

Message
Import of system configuration XML file operation completed with errors.
Detailed Description
The configuration specified in the system configuration XML file was applied, but there were some errors. The Lifecycle Controller Log contains the details of the component configurations that did not complete successfully.
Recommended Response Action
Review the Lifecycle Controller Log and identify the configuration changes that did not complete successfully. Retry those changes in a separate operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS056

Message
Waiting for the system to shut down.
Detailed Description
Waiting for the system to shut down before applying configuration changes.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS057

Message
Exporting system configuration XML file.
Detailed Description
The current system configuration is being collected and the system configuration XML file is being generated.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS058

Message
Applying configuration changes.
Detailed Description
Running Lifecycle Controller Automated Task Execution application in Unified Extensible Firmware Interface (UEFI) environment to apply configuration changes.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS059

Message
Component configuration successfully changed.
Detailed Description
Configuration changes for the component identified by the Fully Qualified Device Descriptor (FQDD) were successfully applied.
Recommended Response Action
No response action is required. See Lifecycle Log for details.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS060

Message
Component configuration completed with errors.
Detailed Description
Some configuration changes for the component identified by the Fully Qualified Device Descriptor (FQDD) in the configuration job results were not successfully applied.
Recommended Response Action
Export the Lifecycle Log and identify the configuration changes that did not complete or retrieve the configuration results using the GetConfigResults() method. Retry those changes that did not complete in a separate import operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS061

Message
Unable to complete component configuration.
Detailed Description
Some configuration changes for the component identified by the Fully Qualified Device Descriptor (FQDD) in the configuration job results were not successfully applied.
Recommended Response Action
Export the Lifecycle Log and identify the configuration changes that did not complete or retrieve the configuration results using the GetConfigResults() method. Retry those changes that did not complete in a separate import operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS062

Message
Input file for import configuration operation is invalid. The expected XML root element was not found.
Detailed Description
The input file for the import configuration operation does not contain a valid XML root element.
Recommended Response Action
Open the input file in any Web browser to check for invalid content before the expected root element. Correct the invalid content and make sure that the XML file is compliant to the system configuration schema before retrying the operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS063

Message
Input file for import configuration operation is invalid. The expected root element was not closed.
Detailed Description
The input file for the import configuration operation does not contain a closed root element.
Recommended Response Action
Open the input file in any Web browser to check for invalid content before the expected root element. Correct the invalid content and make sure that the XML file is compliant to the system configuration schema before retrying the operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS064

Message
Input file for import configuration operation is invalid at line arg1 .
Arguments
  • arg1 = line
Detailed Description
The input file for the import configuration operation contains invalid XML data at the line specified.
Recommended Response Action
Open the input file in any Web browser to check for invalid content before the expected root element. Correct the invalid content and make sure that the XML file is compliant to the system configuration schema before retrying the operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS065

Message
Input file for import configuration operation cannot be found or opened.
Detailed Description
An internal error occurred opening the input configuration XML file. An iDRAC reset is required.
Recommended Response Action
Reset iDRAC and retry the operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS066

Message
No changes detected for iDRAC, System, or Lifecycle Controller configuration.
Detailed Description
No iDRAC, System, or Lifecycle Controller configuration changes were applied. The settings specified in the system configuration XML input file match the current configuration for these components.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS067

Message
Unable to complete application of configuration XML file values.
Detailed Description
Some or all configuration actions during the import of configuration XML operation did not complete successfully. The configuration action details are logged into the Lifecycle Log.
Recommended Response Action
Export the Lifecycle Log and identify the configuration changes that did not successfully complete. Resolve any issues with the configuration XML content and retry the import operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS068

Message
Configuration changes that require system reboot were not applied.
Detailed Description
Some configuration changes that require system reboot were not applied because the values specified in the input XML file are incorrect.
Recommended Response Action
Use the GetConfigResults() method to get the configuration job results or export the Lifecycle Log and review the configuration job results to identify the errors. Make changes to the input XML to correct the errors. Retry the import operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS069

Message
No changes were applied since the current component configuration matched the requested configuration.
Detailed Description
The settings specified in the system configuration XML file match the current configuration for all components.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS070

Message
Configuration changes that require system reboot were not applied.
Detailed Description
The configuration changes that require system reboot into the UEFI environment on the system did not complete for all components.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS071

Message
System configuration XML export operation timed-out.
Detailed Description
The export of system configuration XML did not complete because the operation took too long.
Recommended Response Action
Make sure the Collect System Inventory On Restart (CSIOR) Lifecycle Controller setting is enabled and reboot the system. Retry the operation after CSIOR has completed. If the problem persists, reset iDRAC by pressing the System ID button for at least 15 seconds and retry the operation after iDRAC has fully restarted.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS072

Message
System configuration XML import operation timed-out.
Detailed Description
The import of system configuration XML did not complete as the operation took too long.
Recommended Response Action
Delete all jobs, reset iDRAC by pressing the System ID button for at least 15 seconds, and retry the operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS073

Message
Unable to apply changes that require system reboot because the Lifecycle Controller State setting is disabled in the configuration XML.
Detailed Description
The import of system configuration XML file operation completed with errors because the Lifecycle Controller State was disabled in the input XML. Configuration changes requiring a system reboot were not applied.
Recommended Response Action
Enable the Lifecycle Controller State setting and retry the operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS074

Message
Unable to apply configuration changes because another configuration job is in progress.
Detailed Description
Unable to apply configuration changes because another configuration job is in progress.
Recommended Response Action
Wait until the current configuration job is complete and retry the operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS075

Message
Unable to perform the import operation because the specified file does not exist on the remote share.
Detailed Description
Unable to perform the import operation because the specified file does not exist on the remote share.
Recommended Response Action
Make sure the import configuration file exists on the remote share before retrying the operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS076

Message
Invalid or unsupported component specified in the input configuration XML file.
Detailed Description
The configuration XML file contains a component node that is not supported.
Recommended Response Action
Make sure the input configuration XML file only specifies supported component. Check the import operation job configuration results for the unsupported XML node.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS077

Message
Unable to perform the preview operation because the specified file does not exist on the remote share.
Detailed Description
Unable to perform the preview operation because the specified system configuration XML file does not exist on the remote share.
Recommended Response Action
Make sure the configuration XML file to be previewed exists on the remote share before retrying the operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS078

Message
Unable to retrieve the system configuration XML file from the network share for preview.
Detailed Description
Unable to retrieve the system configuration XML file from the network share for the requested preview operation. This may be due to issues with network accessibility.
Recommended Response Action
If the configuration XML file is on an NFS share, make sure that the network share is accessible from iDRAC. If the configuration XML file is on a CIFS share, make sure that the network share is accessible from iDRAC using the share credentials specified. Test the network share access using the Test Network Connection method. For more information, see the Lifecycle Controller Users Guide.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS079

Message
The Preview operation indicates the input file for system configuration XML is not compliant with the configuration XML schema.
Detailed Description
The Preview operation indicates the input file for system configuration XML is not compliant with the configuration XML schema.
Recommended Response Action
Make sure that the input file is compliant with the system configuration XML schema published on www.delltechcenter.com/lc.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS080

Message
Preview of system configuration XML file import operation indicated that no configuration changes will be successful.
Detailed Description
Preview of system configuration XML file import operation indicates that no changes will be applied successfully. This is likely due to a mismatch between the actual target system components and component FQDDs specified in the configuration XML file.
Recommended Response Action
Make sure that the input file is compliant with the system configuration schema published on www.delltechcenter.com/lc and contains valid FQDDs that represent actual components in the target system.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS081

Message
Successfully previewed system configuration XML file import operation.
Detailed Description
Successfully previewed system configuration XML file import operation.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS082

Message
Completed the preview of system configuration XML file import operation. Some changes specified in the configuration XML will not be successfully applied in an import operation.
Detailed Description
The request to preview the system configuration XML file import operation completed. Some changes specified in the configuration XML file will not be successfully applied in an import configuration XML file operation.
Recommended Response Action
Identify the configuration changes that cannot be completed successfully by 1) Export the Lifecycle Log review the configuration results in the entries for the preview job or 2) Retrieve the preview operation configuration results using the GetConfigResults() method. Retry those changes that did not complete in a separate import operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS083

Message
Unable to export ePSA Diagnostics results because iDRAC internal storage could not be accessed.
Detailed Description
Unable to export ePSA Diagnostics results because iDRAC internal storage could not be accessed.
Recommended Response Action
Do the following: 1) Delete all jobs, 2) Reset iDRAC by pressing the System ID button for at least 15 seconds, and 3) Retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS084

Message
Export of ePSA Diagnostics results did not complete successfully because the iDRAC internal storage containing the results could not be accessed.
Detailed Description
Export of ePSA Diagnostics results did not complete successfully because the iDRAC internal storage containing the results could not be accessed.
Recommended Response Action
Do the following: 1) Delete all jobs, 2) Reset iDRAC by pressing the System ID button for at least 15 seconds, and 3) Retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS085

Message
Successfully exported the ePSA Diagnostics results.
Detailed Description
Successfully exported ePSA Diagnostics results.
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS086

Message
Unable to copy the ePSA Diagnostics results file to the network share.
Detailed Description
Unable to copy the ePSA Diagnostics results file to the specified network share.
Recommended Response Action
If the results are being exported to an NFS share, make sure that the network share is accessible from iDRAC. If the results are being exported to a CIFS share, make sure that the network share is accessible from iDRAC using the specified share access credentials.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS087

Message
A system reboot will occur when the previewed configuration XML file is imported to the system.
Detailed Description
When the configuration XML file specified in the Preview operation is imported to the system, a system reboot will occur to apply the configuration changes.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS088

Message
Estimated time for applying configuration changes is arg1 seconds.
Arguments
  • arg1 = configuration time
Detailed Description
Applying the changes defined in the configuration XML file will take approximately the estimated time identified in the message.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS089

Message
Preview of system configuration XML file is complete.
Detailed Description
The Preview operation of system configuration XML file is complete.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS090

Message
The configuration XML input file contains unsupported DOCTYPE tags.
Detailed Description
The configuration XML Input file contains XML DOCTYPE tags which may contain injection security threats. The XML DOCTYPE tag is not supported in configuration XML files.
Recommended Response Action
Check the input XML file for DOCTYPE XML tags and remove them before retrying the operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS091

Message
Unable to complete the operation because the method is not supported.
Detailed Description
Unable to complete the operation because the method is not supported.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS092

Message
The iDRAC is collecting information about the server for a Tech Support Report.
Detailed Description
The iDRAC is collecting information about the server for a Tech Support Report.
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS093

Message
The iDRAC is exporting the Tech Support Report.
Detailed Description
The iDRAC is exporting the Tech Support Report to the specified destination.
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS094

Message
The iDRAC is unable to start the Tech Support Report job, because a report collection job is already running on the server.
Detailed Description
The Tech Support Report collection job could not be started, because a report collection job is already running on the server.
Recommended Response Action
Wait until the current Tech Support Report operation is complete and then retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS095

Message
Unable to unmount an iDRAC internal storage partition.
Detailed Description
Unable to unmount an iDRAC internal storage partition.
Recommended Response Action
Retry the operation. If the issues persists, reset the iDRAC by pressing the System ID button for at least 15 seconds, and then retry the operation after the iDRAC has finished restarting.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS096

Message
Required ePSA Diagnostics binary does not exist.
Detailed Description
The required ePSA Diagnostics binary does not exist or cannot be found in the iDRAC internal storage.
Recommended Response Action
Install the ePSA Diagnostics binary, and then retry the operation. ePSA diagnostics can be installed using the ePSA Diagnostic Dell Update Package (DUP).
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS097

Message
The state of Lifecycle Controller is disabled by the configuration XML import operation.
Detailed Description
The Lifecycle Controller State has been set to disabled by the configuration XML import operation. Further changes to the system configuration require the Lifecycle Controller State to be enabled before the changes are processed.
Recommended Response Action
If further configuration changes are required for the system, the Lifecycle Controller State must be enabled prior to attempting the configuration change. To enable the Lifecycle Controller State, run the racadm command "racadm set LifecycleController.LCAttributes.LifecycleControllerState Enabled".
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS098

Message
A Remote Diagnostic (ePSA) job already exists.
Detailed Description
A Remote Diagnostic (ePSA) job already exists and only one job of this type can exist at a time.
Recommended Response Action
A response action is not required if the scheduled start time of the existing Remote Diagnostic (ePSA) job is ok. Else, delete the existing Diagnostics (ePSA) job and recreate another with an appropriate start time.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS099

Message
Unable to export the diagnostics results because the results do not exist.
Detailed Description
The diagnostics results could not be exported because either the diagnostics tests were never run on the system or the results could not be found on the internal storage of the iDRAC.
Recommended Response Action
Run the RunEPSADiagnostics method to make sure that the diagnostics results are available, and then retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS100

Message
Unable to find an FQDD match for the token arg1
Arguments
  • arg1 = tokenname
Detailed Description
Selective Export / Import could not find an exact match for the FQDD specified.
Recommended Response Action
Ensure that only valid FQDDs are provided as input to the Target parameter.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS1000

Message
System is turning on.
Detailed Description
System is turning on.
Recommended Response Action
No response action is required.
Category
Audit
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
Trap/EventID
8579
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS1001

Message
System is turning off.
Detailed Description
System is turning off.
Recommended Response Action
No response action is required.
Category
Audit
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
Trap/EventID
8579
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS1002

Message
System is performing a power cycle.
Detailed Description
System is performing a power cycle.
Recommended Response Action
No response action is required.
Category
Audit
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
Trap/EventID
8579
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS1003

Message
System CPU Resetting.
Detailed Description
System is performing a CPU reset because of system power off, power on or a warm reset like CTRL-ALT-DEL.
Recommended Response Action
No response action is required.
Category
Audit
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
Trap/EventID
8579
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS101

Message
Server Administor Data Manager service has started.
Detailed Description
The Server Administratort Data Manager service has started.
Recommended Response Action
No response action is required.
Category
Audit
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
OS Log;None
Server Administrator Event ID
5008
Server Administrator Trap ID
Not Applicable

SYS102

Message
Server Administrator Data Manager service has stopped.
Detailed Description
The Server Administrator Data manager service has stopped.
Recommended Response Action
Restart the Server Administrator Data Manager service.
Category
Audit
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
OS Log;None
Server Administrator Event ID
5009
Server Administrator Trap ID
Not Applicable

SYS103

Message
Administrator has started.
Detailed Description
The Server Administrator has started.
Recommended Response Action
No response action is required.
Category
Audit
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
SNMP Alert;OS Log;None
Server Administrator Event ID
5001
Server Administrator Trap ID
5001

SYS104

Message
Server Administrator is starting.
Detailed Description
The Server Administrator is starting.
Recommended Response Action
No response action is required.
Category
Audit
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
OS Log;None
Server Administrator Event ID
5000
Server Administrator Trap ID
Not Applicable

SYS105

Message
Unable to process the event: arg1 Date and time of event: arg2 .
Arguments
  • arg1 = event
  • arg2 = date time
Detailed Description
The current software version is unable to process this event because of an internal error.
Recommended Response Action
Contact your service provider.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
SNMP Alert;OS Log;None
Server Administrator Event ID
5014
Server Administrator Trap ID
5014

SYS106

Message
An unknown system control action was initiated by the user.
Detailed Description
An unknown system control action was initiated by the user.
Recommended Response Action
No response action is required.
Category
Audit
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
OS Log;None
Server Administrator Event ID
5007
Server Administrator Trap ID
Not Applicable

SYS107

Message
A system reboot was initiated by the user.
Detailed Description
The user initiated a system reboot.
Recommended Response Action
No response action is required.
Category
Audit
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
SNMP Alert;OS Log;None
Server Administrator Event ID
5007
Server Administrator Trap ID
5007

SYS108

Message
A system power off was initiated by the user.
Detailed Description
The user has initiated a system power off action.
Recommended Response Action
No response action is required.
Category
Audit
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
SNMP Alert;OS Log;None
Server Administrator Event ID
5007
Server Administrator Trap ID
5007

SYS109

Message
A system power cycle was initiated by the user.
Detailed Description
The user has initiated a system power cycle action.
Recommended Response Action
No response action is required.
Category
Audit
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
SNMP Alert;OS Log;None
Server Administrator Event ID
5007
Server Administrator Trap ID
5007

SYS110

Message
The actions Shutdown OS First and Reboot System were initiated by the user.
Detailed Description
The actions will shut down the operating system and then reboot the system.
Recommended Response Action
No response action is required.
Category
Audit
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
SNMP Alert;OS Log;None
Server Administrator Event ID
5007
Server Administrator Trap ID
5007

SYS111

Message
The actions Shutdown OS First and Power Off System were initiated by the user.
Detailed Description
The actions will shut down the operating system and then the system.
Recommended Response Action
No response action is required.
Category
Audit
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
SNMP Alert;OS Log;None
Server Administrator Event ID
5007
Server Administrator Trap ID
5007

SYS112

Message
The actions Shutdown OS First and Power Cycle System were initiated by the user.
Detailed Description
The actions will shut down the operating system and then power cycle the system.
Recommended Response Action
No response action is required.
Category
Audit
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
SNMP Alert;OS Log;None
Server Administrator Event ID
5007
Server Administrator Trap ID
5007

SYS113

Message
An invalid action was requested by the user.
Detailed Description
An invalid action was requested by the user.
Recommended Response Action
No response action is required.
Category
Audit
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
SNMP Alert;OS Log;None
Server Administrator Event ID
5007
Server Administrator Trap ID
5007

SYS114

Message
The IPMI status for the interface: arg1 , Baseboard Management Controller (BMC): arg2 , Sensor Data Records (SDR): arg3 , System Event Log (SEL): arg4 .
Arguments
  • arg1 = interface
  • arg2 = BMC
  • arg3 = SDR
  • arg4 = SEL
Detailed Description
IPMI is supported for identified interface, Baseboard Management Controller (BMC), Sensor Data Records (SDR), and System Event Log (SEL).
Recommended Response Action
If any status is not present, power cycle the system, and apply the latest firmware update packages for Lifecycle Controller and iDRAC.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
OS Log;None
Server Administrator Event ID
5012
Server Administrator Trap ID
Not Applicable

SYS115

Message
The power cord sensor is non-functional.
Detailed Description
The power cord sensor becomes non-functional because of one of the following reasons: 1) The power cable may not be connected properly or disconnected. 2) The power cord sensor in the power supply unit has failed. However, the power supply unit may still function. 3) There is an input power failure.
Recommended Response Action
Do of the following to resolve the issue: 1) Reconnect the power cord to the power supply unit. 2) Replace the power supply unit that has the failed power cord sensor, with a new power supply unit. 3) Make sure that the input power supply is restored.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 1 (Critical)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS116

Message
Unable to determine the status of the power cord.
Detailed Description
The status of the power cord cannot be determined because of one of the following reasons: 1) The power cable may not be connected properly or disconnected. 2) The power cord sensor in the power supply unit has failed. However, the power supply unit may still function. 3) There is an input power failure.
Recommended Response Action
Do of the following to resolve the issue: 1) Reconnect the power cord to the power supply unit. 2) Replace the power supply unit that has the failed power cord sensor, with a new power supply unit. 3) Make sure that the input power supply is restored.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS117

Message
The input power supply is restored.
Detailed Description
The input power supply is restored to the system.
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS118

Message
The input power supply is not available.
Detailed Description
The input power supply is not avialable because of one of the following reasons: 1) The power cable may not be connected properly or disconnected. 2) There is an input power failure.
Recommended Response Action
Do of the following to resolve the issue: 1) Reconnect the power cord to the power supply unit. 2) Make sure that the input power supply is restored.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS119

Message
Unable to expose the OS Collector to the server OS.
Detailed Description
The OS collector cannot be exposed to the host server because of communication issues between the iDRAC and server OS.
Recommended Response Action
Do the following: 1) Retry the operation. 2) If the issue persists, restart the iDRAC and server OS.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS120

Message
Unable to complete the operation because the OS Collector is taking too much time. The operation is cancelled.
Detailed Description
The OS Collector application did not complete its task within the maximum allowed time and the operation is cancelled. This may be because the server OS is not supported by the OS Collector application and the application is unable to function correctly.
Recommended Response Action
Do the following: 1) Make sure that the OS Collector application supports the OS installed on the server. If the OS is not supported, the OS Collector may not function correctly. 2) Reinstall the latest OS Collector on the iDRAC, and then retry the operation. To install the OS Collector using the iDRAC Web UI, get the latest OC Collector update package and then select the Update and Rollback link from the iDRAC Web UI home page and upload the install package. If the issue persists, contact your service provider.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS121

Message
The operation to collect OS and Application Data was cancelled using iDRAC Web UI.
Detailed Description
The operation to collect OS and Application Data was cancelled using iDRAC Web UI.
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS122

Message
OS Collector: The operation to collect OS and Application Data is successfully completed.
Detailed Description
The operation to collect OS and Application Data is successfully completed.
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS123

Message
OS Collector: An unexpected issue has been encountered.
Detailed Description
An unexpected issue has occured. This could be because the application encountered an unexpected exception or was terminated by a user. This issue could also be because the application was running in an unsupported OS.
Recommended Response Action
Do the following: 1) Retry the operation. 2) If the issue persists, reinstall the OS Collector on the iDRAC to the most recent version available, and then retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS124

Message
OS Collector: The OS Collector application does not support execution in the OS installed on the server.
Detailed Description
The OS and Application data collection by the OS Collector application is unable to execute on the OS installed on the server because the OS is not supported.
Recommended Response Action
No response action is required.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS125

Message
OS Collector: Unable to communicate with WMI services.
Detailed Description
The OS Collector application is unable to communicate with the WMI service. This may be because the user context the application is running in does not have appropriate access privileges or firewall/security settings are preventing retrieving registry and software data from WMI.
Recommended Response Action
Do the following: 1) Make sure the user context the OS Collector application is running in has the appropriate privileges to access WMI. Make sure that firewall or security settings are set to allow access and retry the operation. 2) If the issue persists, restart the WMI service and retry the operation. 3) If the issue continues to persists, restart the server OS and retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS126

Message
OS Collector: Unable to collect Application Data.
Detailed Description
Application data source was not found. An issue occurred while collecting Application Data because of an unknown exception.
Recommended Response Action
Do the following: 1) Retry the operation. 2) If the issue persists, reinstall the latest OS Collector on the iDRAC, and then retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS127

Message
OS Collector: Unable to collect OS log data
Detailed Description
OS log data was not collected. An issue occurred while collecting OS log data because of an unknown exception.
Recommended Response Action
Do the following: 1) Retry the operation. 2) If the issue persists, reinstall the latest OS Collector on the iDRAC, and then retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS128

Message
OS Collector: Unable to generate a zip archive of the OS and Application Data report.
Detailed Description
Unable to generate a zip archive of the OS and Application Data report.
Recommended Response Action
Do the following: 1) Retry the operation. 2) If the issue persists, reinstall the latest OS Collector on the iDRAC, and then retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS129

Message
OS Collector: Unable to complete XML transform on the data collected.
Detailed Description
Unable to complete XML transform on the data collected because the collected data is in an unexpected format.
Recommended Response Action
Do the following: 1) Retry the operation. 2) If the issue persists, reinstall the latest OS Collector on the iDRAC, and then retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS130

Message
OS Collector: Unable to create filename for zip archive.
Detailed Description
Unable to create the final zip archive name because the Service Tag and time stamp could not be retrieved from OS interfaces.
Recommended Response Action
Do the following: 1) On Windows, restart the WMI service and retry the operation, 2) Restart the OS and retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS131

Message
OS Collector: Unable to communicate with the OS IPMI service.
Detailed Description
Unable to communicate with the OS IPMI service because the service is not running.
Recommended Response Action
For more information about checking whether the IPMI service is running, see the iDRAC8 Users Guide.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS132

Message
OS Collector: Unable to communicate with OS Collector IPMI library.
Detailed Description
An issue occurred while loading the OS Collector IPMI library. This may be because the OS collector binary images are not valid and need to be re-installed.
Recommended Response Action
Do the following: 1) Retry the operation. 2) If the issue persists, reinstall the latest OS Collector on the iDRAC, and then retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS133

Message
OS Collector: IPMI session error.
Detailed Description
An issue was encountered while creating an IPMI session.
Recommended Response Action
Restart the WMI service and retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS134

Message
OS Collector: Zip archive size exceeded the limit.
Detailed Description
The report size is more than the 30MB allowed size which will cause a truncated, partial report to be generated.
Recommended Response Action
Remove older log entries so that the final zip archive size can be reduced.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS135

Message
OS Collector: The user context the OS Collector is being run in does not have the necessary privileges for running the applciation successfully.
Detailed Description
The user context the OS Collector is being run in does not have the necessary privileges for running the applciation successfully.
Recommended Response Action
Run the OS Collector application as administrator or as a user added to admin group or domain administrator or Local administartor.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS136

Message
An issue was encountered while communicating with iDRAC Service Module (iSM) present on the operating system.
Detailed Description
An issue was encountered while communicating with iDRAC Service Module (iSM) present on the operating system.
Recommended Response Action
Do the following: 1) Restart the iDRAC Module Service on the OS and retry the operation. 2) Stop iDRAC Service Module Service on the OS and try manually executing the OS Collector application .
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS137

Message
Unable to start the collection of OS and Application Data because the Lifecycle Controller is not enabled.
Detailed Description
Unable to start the collection of OS and Application Data because the Lifecycle Controller is not enabled.
Recommended Response Action
Enable the Lifecycle Controller by pressing F2 during server startup and select iDRAC Settings > Lifecycle Controller and then enable the Lifecycle Controller. Retry the operation after the server has restarted.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS138

Message
Unable to start the collection of OS and Application Data because the server is turned off.
Detailed Description
Unable to start the collection of OS and Application Data because the server OS is turned off.
Recommended Response Action
Turn on the server and wait until the OS finishes booting, and then retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS139

Message
Unable to start the collection of OS and Application Data because the server is in POST and has not finished startup.
Detailed Description
Unable to start the collection of OS and Application Data because the server is in POST and has not finished startup.
Recommended Response Action
Retry the operation after the server has finished starting and POST has completed.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS140

Message
Unable to start the collection of OS and Application Data because the iDRAC Service Module (iSM) is not running in the server OS.
Detailed Description
Unable to start the collection of OS and Application Data because the iDRAC Service Module (iSM) is not running in the server OS.
Recommended Response Action
Enable and start the iDRAC Service Module (iSM) from within the server OS and then retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS141

Message
Lifecycle Controller data is deleted.
Detailed Description
The Lifecycle Controller data is deleted because of a System Erase operation.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS142

Message
The OS driver pack is deleted.
Detailed Description
The OS driver pack is deleted because of a System Erase operation.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS143

Message
ePSA Diagnostics are deleted.
Detailed Description
ePSA Diagnostics are deleted because of a System Erase operation.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS144

Message
Starting controller hardware cache data erase operations.
Detailed Description
Starting controller hardware cache data erase operations because of a System Erase operation request.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS145

Message
vFlash SD Card data is deleted.
Detailed Description
vFlash SD Card data is deleted because of a System Erase operation.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS146

Message
Starting secure erase-capable drive erase operations.
Detailed Description
Starting secure erase-capable drive erase operations because of a System Erase operation request.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS147

Message
Starting non-secure erase-capable drive erase operations.
Detailed Description
Starting non-secure erase-capable drives erase operations because of a System Erase operation request.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS148

Message
BIOS is configured to reset to defaults on next system restart.
Detailed Description
The BIOS is configured to reset to defaults on the next system restart because of a System Erase operation.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS149

Message
The process of resetting iDRAC to default settings is initiated.
Detailed Description
Initiating iDRAC reset to defaults operation because of a System Erase operation. The iDRAC will restart after firmware default values are restored.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS150

Message
Starting System Erase operation. Job ID: arg1
Arguments
  • arg1 = job ID
Detailed Description
A System Erase job with the job ID identified in the message is initiated.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS151

Message
Completed System Erase Job ID: arg1
Arguments
  • arg1 = job ID
Detailed Description
A System Erase job with the job ID identified in the message is completed.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS152

Message
Erase operations for some System Erase tasks did not complete successfully.
Detailed Description
Some of the requested storage component erase tasks were not successful. Retrying the System Erase operation may be required. The vFlash SD Card must be initialized and licensed to be erased successfully.
Recommended Response Action
Retry the System Erase operation. To retry the System Erase operation using the Lifecycle Controller utility, restart the server and when the company logo is displayed, press <F10>. Select Hardware Configuration > Retire or Repurpose System, check appropriate storage options, and then retry the operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS153

Message
Deleting hardware cache data for controller: arg1 .
Arguments
  • arg1 = device name
Detailed Description
The non-volatile cache of the controller identified in the message is being erased.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS154

Message
Initiating secure erase operation on secure erase-capable drives for controller: arg1 .
Arguments
  • arg1 = device name
Detailed Description
Initiating secure erase operation on secure erase-capable drives for the controller identified in the message.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS155

Message
Initiating clear operation on non-secure erase-capable drives for controller: arg1 .
Arguments
  • arg1 = device name
Detailed Description
Initiating clear operation on non-secure erase-capable drives for the controller identified in the message.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS156

Message
Erase operations for System Erase tasks successfully completed.
Detailed Description
The requested component erase tasks of the System Erase operation is successfully completed.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS157

Message
Unable to successfully complete requested System Erase tasks.
Detailed Description
Unable to successfully complete requested options of the System Erase operation. Retrying the System Erase operation may be required.
Recommended Response Action
Retry the System Erase operation. To retry the System Erase operation using the Lifecycle Controller utility, restart the server and when the company logo is displayed, press <F10>. Select Hardware Configuration > Retire or Repurpose System, check appropriate options, and then retry the operation. Also disable "F1/F2 Prompt on Error" in BIOS settings for System Erase operation to continue without intervention.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS158

Message
Hardware cache erase is unsuccessful.
Detailed Description
Unable to erase hardware caches during the System Erase operation.
Recommended Response Action
Retry the System Erase operation with only the hardware cache erase option selected.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS159

Message
vFlash SD Card erase unsuccessful.
Detailed Description
The vFlash SD Card erase operation was unsuccessful. This may be becasue the SD card is not enable, not licensed or not initialized.
Recommended Response Action
Make sure the vFlash SD Card is enabled, licensed and intialized, and then retry the System Erase operation with only the vFlash option selected.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS160

Message
The Lifecycle Controller logs are cleared.
Detailed Description
The Lifecycle Controller log data deleted as part of a System Erase operation. All previously stored information is no longer available.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS161

Message
Tech Support Report related non-volitale storage deleted.
Detailed Description
The Tech Support Report related data have been deleted from iDRAC non-volitile storage.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS162

Message
Turning on the server to perform System Erase tasks.
Detailed Description
The server will be turned on to enter UEFI System Services Manager (SSM). The storage-related erase operations selected, if any, will be processed by SSM.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS163

Message
The iDRAC is restarting to complete the System Erase operation. Do not restart server until the iDRAC restarts.
Detailed Description
The iDRAC environment has changed and the iDRAC must be restarted to apply the changes requested. Normal operation will return after the restart has completed. One exception is, the iDRAC has been reset to its default settings. In this case additional setup is required to use the iDRAC. For more information, see the iDRAC Users Guide.
Recommended Response Action
No response action is required.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 3 (Informational)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS164

Message
Access to Lifecycle Controller internal storage was not acquired.
Detailed Description
The System Erase operation attempted to access Lifecycle Controller internal storage that is already being accessed by another function. Exclusive access to the internal storage is required for the System Erase operation. The System Erase operation attempts Lifecycle Controller internal storage access for 10 minutes. After the timeout the current job completes with an unsuccessful status.
Recommended Response Action
Check the server and make sure that it is not in BIOS POST startup processing or stopped in the POST phase of startup. The server can also be stopped during POST because the <F2> is pressed or Option ROM setup utilities are being used. After the BIOS startup has completed, retry the operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS165

Message
One or more Tech Support Report data collection options selected did not complete successfully.
Detailed Description
One or more Tech Support Report data collection options selected did not complete successfully.
Recommended Response Action
Look at the Lifecycle Log for exception messages and resolve the issues described.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS166

Message
The collection of OS and Application Data did not start within the allocated time.
Detailed Description
The collection of OS and Application Data did not start within the allocated time.
Recommended Response Action
Do one of the following: 1) Retry the operation. 2) Make sure the OS does not have any firewall setting to block USB device enumeration, and then retry the operation. 3) Make sure the OS is not configured to attach USB devices as read-only, and then retry the operation. 4) Make sure the OS is supported by the OS Collector application. 5) Reinstall the latest OS Collector on the iDRAC, and then retry the operation. 6) For more information about the collection of OS and application data, see the iDRAC8 Users Guide.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS167

Message
TTY Log data export did not complete within the allocated time.
Detailed Description
The TTY Log data export did not complete within the allocated time. Currently the maximum allocated time is 20 minutes.
Recommended Response Action
Reset the iDRAC and retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS168

Message
Unable to complete the System Erase job because another operation is in progress.
Detailed Description
The requested System Erase job cannot complete because there was another job or System Services task already in progress.
Recommended Response Action
Wait for the job or System Services task in progress to complete before initiating a System Erase job.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS169

Message
The iDRAC Service Module installed on the operating system is not up to date and does not support the Technical Support Report feature.
Detailed Description
The iDRAC Sevice Module installed on the operating system is not up to date and does not support the Technical Support Report.
Recommended Response Action
Make sure the operating system (OS) is a supported OS for the Technical Support Report feature and the latest iDRAC Service Module software is installed on the OS.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS170

Message
The SHA256 Hash value and the clear text value for an iDRAC user password cannot be entered together.
Detailed Description
The SHA256 Hash value and the clear text value for an iDRAC user password cannot be used at the same time for a password configuration operation.
Recommended Response Action
Make sure that the user password is configured using either the clear text or the SHA256 Hash, but not both.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS171

Message
Unable to successfully complete the import operation because not all hash password values have been entered.
Detailed Description
The import operation cannot be completed successfully because the SHA1v3Key and the MD5V3Key values must both be supplied.
Recommended Response Action
The SHA1v3Key and the MD5V3Key values must be entered together for an import operation.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS172

Message
A Remote Diagnostic operation has been interrupted.
Detailed Description
A Remote Diagnostic operation has been interrupted because the server was restarted during the operation.
Recommended Response Action
Make sure that there are no diagnostic operations in progress before restarting the server or wait for the Remote Diagnostic operation to complete.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS173

Message
Unable to retrieve the TTY Log because another operation is in progress on the RAID controller.
Detailed Description
The TTY Log cannot be retireved because another operation is in progress on the RAID controller.
Recommended Response Action
Do the following: 1) View the job queue and make sure all jobs are in a completed state. 2) Retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS174

Message
Unable to access network share for exporting Tech Support Report (TSR).
Detailed Description
The Tech Support Resport (TSR) cannot be exported because of an issue while connecting to the network share using the provided credentials or other network share parameters.
Recommended Response Action
Make sure the entered sharetype, sharename, IP address, username and password are valid and retry the operation. The network share connectivity can be tested by using the Test Network Connection feature of the iDRAC.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS175

Message
No device configuration could be identified for the specified FQDDs.
Detailed Description
Selective Export / Import could not find any matches for the FQDDs specified.
Recommended Response Action
Ensure that only valid FQDDs are provided as input to the Target parameter.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS176

Message
Unable to update the OSApp Health Data using the iSM OS Collector plugin option because the because the relevant service module is not running
Detailed Description
The OSApp HealthData cannot be updated using the iSM OS Collector plugIn option,,because the relevant service module is not running. iSM OS Collector plugin must be installed and running to update the OS-based (DSET-Lite) report.
Recommended Response Action
Run the iDRAC Service Module on the host or update the OSApp data using manual option.
Category
Configuration
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS177

Message
There was an issue retrieving Hardware data.
Detailed Description
There was an issue retrieving Hardware data from the iDRAC internal storage. This may be because Collect System Inventory on Restart (CSIOR) feature is disabled and has never executed or the iDRAC Remote Services API status may not be in the Ready state.
Recommended Response Action
Make sure the Collect System Inventory on Restart (CSIOR) is enabled and has run at least once before retrying this operation. For remote web services API access, make sure the GetRemoteServicesAPIStatus method returns Ready status before trying this operation. If the issue persists, reset iDRAC and retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS178

Message
Unable to retrieve TTY log data because no storage controllers are detected in the server.
Detailed Description
Unable to retrieve TTY log data because no storage controllers are detected in the server.
Recommended Response Action
Make sure that at least one storage controller is present in the server, and then retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS179

Message
Unable to export TTY log data because the storage controller present in the server does not support the feature.
Detailed Description
Unable to export TTY log data because the storage controller present in the server does not support the feature.
Recommended Response Action
Make sure that at least one storage controller is present in the server that supports the TTY log feature, and then retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS180

Message
There was an issue encountered when attempted to export TTY Log data for the storage controller arg1 .
Arguments
  • arg1 = controller name
Detailed Description
The TTY log data of the storage controller identified in the message cannot be exported because an issue was encountered while communicating with the controller.
Recommended Response Action
While exporting the TTY log, make sure that the server is not in BIOS POST, and then retry the operation. If the issue persists, reset iDRAC, and retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS181

Message
Unable to collect OS and Application Data because the OS Collector is not installed on the iDRAC.
Detailed Description
The collect OS and Application Data operation cannot be completed because the OS Collector is not installed on the iDRAC.
Recommended Response Action
Install OS Collector on the iDRAC and retry the operation. To install the OS Collector using the iDRAC Web UI, get the latest OC Collector update package and then select the Update and Rollback link from the iDRAC Web UI home page and upload the install package.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS182

Message
Unable to collect OS and Application Data because another Lifecycle Controller operation is currently in progress.
Detailed Description
Collecting OS and Application Data cannot be completed because Lifecycle Controller is used by another operation.
Recommended Response Action
Make sure all other Lifecycle Controller operations are finished and retry the operation. Using the iDRAC Web UI, select Server > Job Queue, check the job queue for unfinished jobs and wait for the jobs to finish before retrying the operation. Also, check whether there are update packages being executed in the server OS and wait for these operations to finish before retrying the operation. For remote web services API access, make sure that the GetRemoteServicesAPIStatus method returns Ready status, and then retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS183

Message
Unable to allocate memory because of insufficient storage space in iDRAC.
Detailed Description
The memory cannot be allocated because of insufficient storage space in iDRAC.
Recommended Response Action
Reset iDRAC and then retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS184

Message
Unable to compute the checksum because OS Collector files are not readable.
Detailed Description
The checksum cannot be computed because OS Collector files are not readable.
Recommended Response Action
Reinstall the OS Collector in the iDRAC and retry the operation. To install the OS Collector using the iDRAC Web UI, get the latest OC Collector update package and then select the Update and Rollback link from the iDRAC Web UI home page and upload the install package. If the issue persists, contact your service provider.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
LC Log
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS185

Message
The Tech Support Report job has been cancelled.
Detailed Description
The Tech Support Report job that was running has been cancelled by user request.
Recommended Response Action
To start another Tech Support Report job, wait until the current job that is being cancelled completes and then retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS186

Message
Unable to start the collection of TTY log data because the server is turned off.
Detailed Description
Unable to start the collection of TTY log data because the server OS is turned off.
Recommended Response Action
Turn on the server and wait until the OS finishes booting, and then retry the operation.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

SYS187

Message
Unable to start the collection of TTY log data because the server is in POST and has not finished startup.
Detailed Description
Unable to start the collection of TTY log data because the server is in POST and has not finished startup.
Recommended Response Action
Retry the operation after the server has finished starting and POST has completed.
Category
System Health
Subcategory
SYS = System Info
Severity
Severity 2 (Warning)
LCD Message
No LCD message display defined.
Initial Default
None
Server Administrator Event ID
Not Applicable
Server Administrator Trap ID
Not Applicable

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\