Dell Unisphere for PowerMax 10.0.1.0 Installation Guide

Launching Unisphere for PowerMax

1. Type one of the following URLs in a browser:

   https://host_IP:port_number

   or

   https://host_name:port_number

   The port number is configured during installation. The default HTTPS port number is 8443.

   If the host IP address is an IPv6 address, surround the IP address with square brackets, for example:

   https://[2001:db8:ffff:ffff:ffff:ffff:ffff:ffff]:8443

   If the host IP address is an IPv4 address, type the IP address as normal, for example:

   https://198.51.100.255:8443

2. Do one of the following:

   • At the login window, type the Unisphere Initial Setup User username and password, and click Login.

     The default username for the Unisphere Initial Setup User is smc and the default password is smc.

   • If you are using certificate-based user authentication, click Options to display more options, and select Use Client Certificate. If the Unisphere for PowerMax login window does not display correctly, ensure that the CA certificates have been imported correctly.

3. Click Login.