Precision 7560 Service Manual

Installing the middle cap

1. With the open side of the middle hinge cap facing down, push the cap into the right display hinge cap at an angle while tucking the WWAN antennas into its hollow center.
   
2. Push the other side of the cap into the left display hinge cap and tuck the display cable into the middle cap hollow center.
   
3. Rotate the hinge cap and tuck the tabs on the middle cap underneath the speaker module.
   
4. Align and insert the middle cap onto the palmrest.
   NOTE:Ensure that the openings on the left and right side of the middle cap is secured in place by the two alignment pegs on the palmrest.

   
5. Replace the four (M2x3) screws to secure the middle cap in place.