- Notes, cautions, and warnings
- Working inside your computer
- Removing and installing components
- Recommended tools
- Screw list
- Major components of Precision 7560
- SD card
- Secondary M.2 solid-state drive
- Base cover
- Battery
- Solid State Drive
- Secondary memory module
- SIM card
- WLAN card
- WWAN card
- Keyboard lattice
- Keyboard
- Primary memory module
- Inner frame
- Smart-card reader
- Touchpad button
- SD card reader
- Heat sink
- Power button board
- Power button board with fingerprint reader
- Power button
- Power button assembly with fingerprint reader
- GPU power cable
- System board
- Power-adapter port
- GPU card
- Speaker
- Middle cap
- Display assembly
- Palm rest
- Display bezel
- Display panel
- Display hinges
- Camera shutter cap
- Camera
- P-sensor board
- Display cable
- Display back cover
- Drivers and downloads
- BIOS setup
- Troubleshooting
- Getting help and contacting Dell
Precision 7560 Service Manual
Installing the power button board assembly with fingerprint reader
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
Steps
- Connect the power button board FFC to the power button board.
- Align and place the power button board with power button FFC into its slot on the computer.
- Replace the (M2x3) screw to secure the power button board to the computer.
- Adhere the power button board FFC to the palmrest.
- Connect the power button board FFC to the connector on the system board.
- Connect the power button board assembly with fingerprint reader FPC to the power button board.
- Replace the power button board assembly with fingerprint reader FPC bracket above the power button daughter board.
- Replace the (M2x3) screw to secure the power button board assembly with fingerprint reader FPC bracket in place.
Next steps
- Install the heat-sink assembly.
- Install the battery.
- Install the base cover.
- Install the SD card.
- Follow the procedure in after working inside your computer.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\