Vostro 3584 Service Manual

Installing the display assembly

1. Align and place the palmrest and keyboard assembly under the hinges on the display assembly [1].
2. Seat the palmrest and keyboard assembly on the display assembly [2].
3. Press the hinges down on the system board, and palmrest and keyboard assembly [3].
   
4. Replace the five (M2.5x5) screws that secure the left and right hinges to the system board, palmrest and keyboard assembly [1].
   
5. Route the display cable through the routing guides on the fan and the palmrest and keyboard assembly [1].
6. Connect the display cable to the connector on the system board [2].
7. Affix the antenna cables to the system board [3].