Vostro 3584 Service Manual

Removing the display assembly

1. Open the latch and disconnect the display cable from the system board [1].
2. Unroute the display cable from the routing guides on the palmrest and keyboard assembly [2].
3. Peel off the tape securing the wireless antenna from the system board [3].
   
4. Remove the five (M2.5x5) screws that secure the left and right hinges to the system board, and palmrest and keyboard assembly [1].
5. Lift the palmrest and keyboard assembly at an angle [2].
   
6. Lift the hinges and remove the palmrest and keyboard assembly off the display assembly [1, 2].
   
7. After performing all the preceding steps, you are left with display assembly.