Vostro 3584 Service Manual

Installing the system board

1. Align the screw hole on the system board with the screw hole on the palmrest and keyboard assembly [1].
2. Replace the single (M2x4) screw that secures the system board to the palmrest and keyboard assembly [2].
   
3. Connect the following cables to the system board:
   1. Power button board cable [1].
   2. Finger print board cable [2].
   3. IO board cable [3].
   4. Hard drive cable [4].
   5. Touchpad cable [5].
   6. Keyboard cable [6].
      
4. Connect the power adapter port cable and speaker cable to the system board [1, 2].