From the desktop menu, click System Setup, and then click Remote Connections.
The Remote Connections dialog box
is displayed.
Click the Authentication tab, click the Caradigm button,
enter the IP address of the SSO & CM Server, and then click OK.
On the Caradigm Vault Server, use the following guidelines:
Ensure that the Enroll unenrolled badges option is checked.
Make sure that all Badge ID mapping entries are deleted.
Click SSO&CM > Advanced
Configurations , and use the following guidelines:
Ensure that the Enable Proximity Support check box is
selected.
Ensure that the Enable way2care check box is selected.
To prepare a certificate to the Caradigm Vault Server, use the following
guidelines:
The Caradigm Vault Server uses the certificate to
validate the connection between the Tap Server and the thin client.
To raise a request for the certificate:
The certificate
should be issued by your Certificate Authority.
Prepare the certificate in two formats:
PFX format
which has a private key.
The other is PEM format which is text-based, Base64-encoded DER file.
For Example, Caradigm.cer, Caradigm.pfx.
To import a certificate to the thin client, use either of the
following two options:
Click System Setup > System tools > Certificates to import certificates
from USB storage or file server.
Use INI file to import certificate.
AddCertificate=client_cert.pfx password=passpass
To add a certificate to Vault server:
Use the Thin Client Certificates page to
add certificates for the thin client devices. The certificate must
be a text in PEM format, that is, a text-based Base64-encoded DER
file.
Open the
DER cert file on Notepad.
Log in to the Vault Server Admin Console, and then click Appliance > Thin Client Certificates.
Copy the Notepad text to the Vault server
Configuration
on VDI server and desktops
Caradigm solution of
ThinOS supports the multi-types of VDI server such as VMware View
Horizon 6, Citrix Virtual Apps 6.5, Citrix Virtual Apps and Desktops 5.6, and Citrix Virtual Apps and Desktops 7.6.
To configure the VDI server and desktop:
Install
the Caradigm desktop components in the servers and desktops.
Indicate vault server IP, and then provide a valid security token.
Add following lines to Service section of the \programdata\sentillion\vergence\Authenticator.ini
configuration file.