Dell Wyse ThinOS Version 8.6.1 Administrator's Guide

Configure the Teradici Cloud Access broker connection

1. From the desktop menu, click System Setup, and then click Remote Connections.
   The Remote Connections dialog box is displayed.
2. On the Broker Setup tab, from the Select Broker Type drop-down list, select Teradici Cloud Access, and configure the following options:
   • Broker Server—Enter the IP address or FQDN of the broker server.
   • Auto Connect List—Enter the name of desktops that you want to start automatically after logging in to the respective broker. Use a semicolon to separate each desktop name.

     NOTE: : Field values are case-sensitive.

   • Security mode—Select your preferred security mode from the following options:
     • Warning—Warn security requires the FQDN address with a self-signed certificate, or without any certificate. However, the corresponding warning message is displayed.
     • Full—Full security requires the FQDN address with a domain certificate.
     • Low—Low security allows the FQDN or IP address with or without a certificate.
     • Default—Follows the global security mode settings.
   • Connection Protocol—By default, the option is set to PCoIP Only.
3. Click OK to save your settings.