Dell Wyse ThinOS Version 8.6.1 Administrator's Guide

Configure the general central configurations

1. From the desktop menu, click System Setup, and then click Central Configuration.
   The Central Configuration dialog box is displayed.
2. Click General tab, and use the following guidelines:

   

   File Servers/Path, Username and Password —Enter the IP address or host name of the file server that provides the system software and update images. The address can be supplied through DHCP, if DHCP is used.
   1. File Servers/Path — Allows maximum of 127 characters for file server, and maximum of 127 characters for root path. The data specifies part of the path to be used when the server is accessed.
      File server supports failover list. A failover list consists of one or more file server pairs specified in the order of preference. You can provide multiple file servers separated by either a semicolon or colon. The list must not exceed 127 characters. When connecting to a file server, the client attempts to connect to each pair in an order until it finds a working file server pair.
   2. Username—Enter the username to log in to the file server. Use maximum of 31 characters.
   3. Password—Enter the password to log in to the file server. Use maximum of 31 characters.
3. Click OK to save the settings.