- Notes, cautions, and warnings
- Introduction
- RACADM Subcommand
Details
- Guidelines to Quote Strings Containing Special Characters When Using RACADM Commands
- Question mark and question mark with subcommand
- help and help with subcommand
- chassislog
- chassislog export
- chassislog clear
- chassisaction
- closessn
- clrsel
- config
- connect
- deploy
- eventfilters
- fanoffset
- feature
- featurecard
- fwupdate
- get
- getactiveerrors
- getassettag
- getchassisname
- getconfig
- getdcinfo
- getsleduplinkstatus
- getflexaddr
- getioinfo
- getled
- getmacaddress
- getmodinfo
- getniccfg
- getpbinfo
- getpciecfg
- getpminfo
- gettracelog
- getractime
- getsel
- getslotname
- getsensorinfo
- getssninfo
- getstoragemoduleinfo
- getsvctag
- getsysinfo
- gettracelog
- getversion
- ifconfig
- jobqueue
- krbkeytabupload
- license
- netstat
- ping
- ping6
- racdump
- racreset
- racresetcfg
- remoteimage
- serveraction
- set
- setassettag
- setchassisname
- setflexaddr
- setled
- setniccfg
- setractime
- setslotname
- setsysinfo
- SSH or Telnet RACADM
- sshpkauth
- sslkeyupload
- sslcertupload
- sslcertview
- sslcsrgen
- sslresetcfg
- testemail
- testfeature
- testtrap
- traceroute
- traceroute6
- CMC Property
Database Group and Object Descriptions
- idRacInfo
- cfgLanNetworking
- cfgNicIPv4Enable - Read or Write
- cfgNicVLanEnable - Read or Write
- cfgNicVLanId - Read or Write
- cfgNicVLanPriority - Read or Write
- cfgDNSDomainNameFromDHCP - Read or Write
- cfgDNSDomainName - Read or Write
- cfgDNSRacName - Read or Write
- cfgDNSRegisterRac - Read or Write
- cfgDNSServersFromDHCP - Read or Write
- cfgDNSServer1 - Read or Write
- cfgDNSServer2 - Read or Write
- cfgNicEnable - Read or Write
- cfgNicIpAddress - Read or Write
- cfgNicNetmask - Read or Write
- cfgNicGateway - Read or Write
- cfgNicUseDhcp - Read or Write
- cfgNicMacAddress - Read only
- cfgUserAdmin
- cfgEmailAlert
- cfgSessionManagement
- cfgSerial
- cfgSerialBaudRate (Read/Write)
- cfgSerialConsoleEnable (Read/Write)
- cfgSerialConsoleQuitKey (Read or Write)
- cfgSerialConsoleIdleTimeout (Read/Write)
- cfgSerialConsoleNoAuth (Read/Write)
- cfgSerialConsoleCommand (Read/Write)
- cfgSerialConsoleColumns
- cfgSerialHistorySize (Read/Write)
- cfgSerialSshEnable (Read/Write)
- cfgSerialTelnetEnable (Read/Write)
- cfgOobSnmp
- cfgTraps
- cfgRacTuning
- cfgRacTuneDefCredentialWarningEnable
- cfgRacTuneRemoteRacadmEnable (Read/Write)
- cfgRacTuneChassisMgmtAtServer
- cfgRacTuneHttpPort (Read/Write)
- cfgRacTuneHttpsPort (Read/Write)
- cfgRacTuneIpRangeEnable (Read/Write)
- cfgRacTuneIpRangeAddr (Read/Write)
- cfgRacTuneIpRangeMask (Read/Write)
- cfgRacTuneIpBlkEnable (Read/Write)
- cfgRacTuneIpBlkFailCount (Read/Write)
- cfgRacTuneIpBlkFailWindow (Read/Write)
- cfgRacTuneIpBlkPenaltyTime (Read/Write)
- cfgRacTuneSshPort (Read/Write)
- cfgRacTuneTelnetPort (Read/Write)
- cfgRacTuneDaylightOffset (Read Only)
- cfgRacTuneTimezoneOffset
- cfgRacTuneSledNetworkUplink
- cfgRacTuneUserBlkEnable
- cfgRacTuneWebserverEnable (Read/Write)
- cfgRacTuneFipsModeEnable
- cfgRacTuneTLSProtocolVersionEnable
- cfgServerInfo
- cfgServerInfoIndex (Read Only)
- cfgServerSlotNumber (Read Only)
- cfgServerServiceTag (Read Only)
- cfgServerName (Read/Write)
- cfgServerFW (Read Only)
- cfgServerBIOS (Read Only)
- cfgServerBmcMacAddress (Read Only)
- cfgServerNic1MacAddress (Read Only)
- cfgServerNic2MacAddress (Read Only)
- cfgServerNic3MacAddress (Read Only)
- cfgServerNic4MacAddress (Read Only)
- cfgServerNicEnable (Read/Write)
- cfgServerNodeId
- cfgServerIPMIOverLanEnable (Read/Write)
- cfgServerDNSRegisterIMC (Read/Write)
- cfgServerDNSIMCName (Read/Write)
- cfgServerRootPassword (Write Only)
- cfgServerFirstBootDevice (Read/Write)
- cfgServerBootOnce (Read/Write)
- cfgStorageModule
- cfgActiveDirectory
- cfgADRacName (Read/Write)
- cfgADCertValidationEnable (Read/Write)
- cfgADRacDomain (Read or Write)
- cfgADRootDomain
- cfgADEnable (Read/Write)
- cfgADAuthTimeout (Read/Write)
- cfgADSCLEnable
- cfgADDomainController
- cfgADDomainController1 (Read/Write)
- cfgADDomainController2 (Read/Write)
- cfgADDomainController3 (Read/Write)
- cfgADGlobalCatalog1 (Read/Write)
- cfgADGlobalCatalog2 (Read/Write)
- cfgADGlobalCatalog3 (Read/Write)
- cfgADType (Read/Write)
- cfgADDcSRVLookupDomainName (Read/Write)
- cfgADDcSRVLookupDomainName (Read/Write)
- cfgADDcSRVLookupEnable (Read/Write)
- cfgADSpecifyServerEnable
- cfgLDAP
- cfgLdapEnable (Read/Write)
- cfgLdapServer (Read/Write)
- cfgLdapPort (Read/Write)
- cfgLdapBasedn (Read/Write)
- cfgLdapUserAttribute (Read/Write)
- cfgLdapGroupAttribute (Read/Write)
- cfgLdapGroupAttributeIsDN (Read/Write)
- cfgLdapBinddn (Read/Write)
- cfgLdapBindpassword (Write Only)
- cfgLdapSearchFilter (Read/Write)
- cfgLDAPCertValidationEnable (Read/Write)
- cfgLDAPNetworkTimeout
- cfgLDAPSearchTimeout
- cfgLDAPSRVLookupDomainName
- cfgLDAPSRVLookupEnable
- cfgLDAPSRVLookupServiceName (Read/Write)
- cfgLdapRoleGroup
- cfgLocation
- cfgStandardSchema
- cfgChassisPower
- cfgChassisInPower (Read Only)
- cfgChassisPeakPower (Read Only)
- cfgChassisPeakPowerTimestamp (Read Only)
- cfgChassisMinPower (Read Only)
- cfgChassisMinPowerTimestamp (Read Only)
- cfgChassisPowerStatus (Read Only)
- cfgChassisRedundantState (Read Only)
- cfgChassisMaxPowerConservationMode (Read/Write)
- cfgChassisPowerCapUpperBound (Read Only)
- cfgChassisPowerCapLowerBound (Read Only)
- cfgChassisSledPowerButtonEnable
- cfgChassisPowerCap (Read/Write)
- cfgChassisPowerCapF (Read/Write)
- cfgChassisPowerCapBTU (Read/Write)
- cfgChassisPowerCapFBTU (Read/Write)
- cfgChassisPowerCapPercent (Read/Write)
- cfgChassisPowerCapFPercent (Read/Write)
- cfgChassisRedundancyPolicy (Read/Write)
- cfgChassisInMaxPowerCapacity (Read Only)
- cfgChassisInRedundancyReserve (Read Only)
- cfgChassisPowerClear (Write Only)
- cfgChassisPowerClearTimestamp (Read Only)
- cfgChassisPowerButtonEnable (Read/Write)
- cfgChassisPowerCapBTU (Read/Write)
- cfgChassisACPowerRecoveryDisable
- cfgKVMInfo
- cfgAlerting
- cfgIPv6LanNetworking
- cfgCurrentLanNetworking (Read Only)
- cfgCurrentIPv6LanNetworking (Read Only)
- cfgNetTuning
- cfgRacSecurity
- cfgPCIe
- cfgQuickDeploy
- cfgActionOnServerInsertion
- cfgSetiDRACRootPasswordOnServerInsertion
- cfgiDRACRootPassword
- cfgEnableiDRACLAN
- cfgEnableiDRACIPv4
- cfgEnableiDRACIPMIOverLAN
- cfgEnableiDRACIPv4DHCP
- cfgStartingiDRACIPv4Address
- cfgiDRACIPv4GateWay
- cfgiDRACIPv4Netmask
- cfgEnableiDRACIPv6
- cfgEnableiDRACIPv6AutoConfig
- cfgiDRACIPv6PrefixLength
- cfgiDRACIPv6Gateway
- cfgReservedIPAddressNumbers
- cfgUseCMCDNSSettings
Dell Chassis Management Controller Version 2.0 for PowerEdge FX2 and FX2s RACADM CLI Guide
cfgUserAdminPrivilege - Read or Write
|
Description |
This property specifies the role-based authority privileges allowed for the user. The value is represented as a bit mask that allows for any combination of privilege values. The table below describes the user privilege bit values that can be combined to create bit masks. |
|
Legal Values |
0x0000000-0x0000fff, and 0x0 |
|
Default |
0x00000000 |
Example
racadm getconfig -g cfgUserAdmin -i 1
# cfgUserAdminIndex=1
cfgUserAdminEnable=1
cfgUserAdminUserName=root
# cfgUserAdminPassword=******** (Write-Only)
cfgUserAdminPrivilege=0x00000fff
The following table lists the bit masks for user priveleges.
|
iDRAC Specific User Privilege |
Privilege Bit Mask |
|
Login to iDRAC |
0x00000001 |
|
Configure iDRAC |
0x00000002 |
|
Configure Users |
0x00000004 |
|
Clear Logs |
0x00000008 |
|
Execute Server Control Commands |
0x00000010 |
|
Access Virtual Console |
0x00000020 |
|
Access Virtual Media |
0x00000040 |
|
Test Alerts |
0x00000080 |
|
Execute Debug Commands |
0x00000100 |
|
CMC Specific User Privilege |
|
|
CMC Login User |
0x0000001 |
|
Chassis Configuration Administrator |
0x0000002 |
|
User Configuration Administrator |
0x0000004 |
|
Clear Logs Administrator |
0x0000008 |
|
Chassis Control Administrator |
0x0000010 |
|
Super User |
0x0000020 |
|
Server Administrator |
0x0000040 |
|
Test Alert User |
0x0000080 |
|
Debug Command Administrator |
0x0000100 |
|
Fabric A Administrator |
0x0000200 |
|
Fabric B Administrator |
0x0000400 |
|
Fabric C Administrator |
0x0000800 |
Examples
The following table provides sample privilege bit masks for users with one or more privileges.
|
User Privilege(s) |
Privilege Bit Mask |
|
The user is not allowed to access CMC. |
0x00000000 |
|
The user may only log in to CMC and view CMC and server configuration information. |
0x00000001 |
|
The user may log in to CMC and change configuration. |
0x00000001 + 0x00000002 = 0x00000003 |
|
The user may log in, access Virtual Media, and Virtual Console. |
0x00000001 + 0x00000040 + 0x00000080 = 0x000000C1 |
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\