Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell Chassis Management Controller Version 2.0 for PowerEdge FX2 and FX2s RACADM CLI Guide

PDF

racresetcfg

Description Resets CMC configuration to factory default settings.
  • NOTE: To use this, you must have the Chassis Administrator privilege.
Synopsis racadm racresetcfg [-m < module>] [-c < feature>]
Input
  • -m : <module> — Must be one of the following values:
    • chassis — default state, if -m is not specified.
    • server-<n> — where n=1–4
    • server-<nx> — where n=1–4 and x=a-d (lower case)
    • NOTE: The values n= 2 and 4 are valid for multi-node sleds only
  • -c : <feature> — Must be one of the following values:
    • ad — Reset Active Directory and LDAP properties to the default value. The default setting is “disabled”.
    • pcap — Reset Power Cap properties to the default value.
    • flex — Reset FlexAddress properties to the default value. The default setting is “disabled”.
    • NOTE: The –c option is valid with only <module=chassis> only.
    • NOTE: If the racresetcfg is performed on a chassis, the CMC resets after the task.
Example
  • Perform reset of configuration data to defaults for server-1 module. 
    racadm racresetcfg -m server-1
  • Perform reset of power cap feature. 
    racadm racresetcfg -c pcap

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\