Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell Chassis Management Controller Version 2.0 for PowerEdge FX2 and FX2s RACADM CLI Guide

PDF

Question mark and question mark with subcommand

Description

Displays all the subcommands you can use with the RACADM command and a one-line description of each subcommand.

? followed by < subcommand > displays the syntax for the specified command.

To use this subcommand, you must have the CMC Login User privilege.

You can also use the help and help < subcommand> commands to obtain the same information.

Synopsis
  • racadm ?
  • racadm ? < subcommand>
Input NA
Output NA

Example for RACADM ?

The following output example shows only part of the actual output for the racadm ? command. Descriptions shown in this example may vary slightly from the descriptions in your racadm session. 

racadm ?
help            -- list racadm subcommand description
                                 help <
                                 subcommand> -- display usage summary for a subcommand
                                 ?               -- list racadm subcommand description
                                 ? <
                                 subcommand>  -- display usage summary for a subcommand
                                 arp             -- display the networking arp table
                                 chassisaction   -- execute chassis or switch power-up/down/cycle or
                                 clrraclog       -- clear the CMC log
                                 clrsel          -- clear the System Event Log (SEL)
                                 config          -- modify CMC configuration properties
                                 ...
                                 setniccfg       -- modify network configuration properties
                                 setractime      -- set the time on the CMC
                                 setslotname     -- sets the name of the slot in the chassis
                                 setsysinfo      -- set the chassis name and chassis location
                                 sslcertview     -- display a CA/server certificate in the CMC
                                 sslcsrgen       -- generate a certificate CSR from the CMC
                                 testemail       -- test CMC e-mail notifications
                                 testfeature     -- test CMC feature x
                                 testtrap        -- test CMC SNMP trap notifications
                                 traceroute      -- determine the route of a packet
                                 traceroute6     -- determine the route of a packet

Example for RACADM ? < subcommand> 

racadm ? getsysinfo
getsysinfo -- display general CMC and system information
                                 Usage:
                                 racadm getsysinfo [-d] [-c] [-A] [-4] [-6]
                                 -----------------------------------------------------------
                                 Valid Options:
                                 -d : show CMC information
                                 -c : show chassis information
                                 -A : do not show headers or labels
                                 -4 : show CMC IPv4 information
                                 -6 : show CMC IPv6 information

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\