Dell Chassis Management Controller Version 2.0 for PowerEdge FX2 and FX2s RACADM CLI Guide

Description

Displays power management status information.

To use this subcommand, you must have CMC Login User privilege.

Synopsis

racadm getpminfo

Example

racadm getpminfo

[Real-Time Power Statistics]
                                                System Input Power                     = 89 W (303 BTU/h)
                                                Peak System Power                      = 93 W (317 BTU/h)
                                                Peak System Power Start Time           = 20:26:06 03/04/2014
                                                Peak System Power Timestamp            = 20:28:32 03/04/2014
                                                Minimum System Power                   = 83 W (283 BTU/h)
                                                Minimum System Power Start Time        = 20:26:06 03/04/2014
                                                Minimum System Power Timestamp         = 20:28:02 03/04/2014
                                                System Idle Power                      = 89 W (303 BTU/h)
                                                System Potential Power                 = 417 W (1422 BTU/h)
                                                System Input Current Reading           = 0.6 A
                                             

[Real-Time Energy Statistics]
                                                System Energy Consumption              = 62.2 kWh
                                                System Energy Consumption Start Time = 15:56:11 02/12/2014
                                                System Energy Consumption Timestamp  = 06:07:07 03/05/2014
                                             

[System Power Status]
                                                Chassis Power State                    = ON
                                                Overall Power Health                   = OK
                                                Redundancy                             = Yes
                                             

[System Power Policy Configuration]
                                                System Input Power Cap                 = 3371 W (11502 BTU/h | 100%)
                                                Redundancy Policy                      = Redundancy Alerting Only
                                             

[Power Budgeting]
                                                System Input Max Power Capacity        = 2382 W
                                                Input Redundancy Reserve               = 0 W
                                                Power Available for Server Power-on    = 1965 W